DATA SHEET ABC150 SERIES 150W AC/DC FEATURES 110 W convection cooled -20 to 50 deg C full load operation 90-264 VAC input 2” x 4” x 1.3” (101.6 x 50.8 x 33.6 mm) No minimum load required Fan output, 12 Vdc @ 0.5A standard Conducted EMI EN 55022-B, FCC Part 15 Level B ITE Safety Agency Approvals RoHS Compliant APPLICATIONS Instrumentation Renewable Energy Lighting Wireless Data Industrial Applications Automation Control Test and Measurement Applied Computing BCD.00283_AA_September-18-2013 1 www.power-one.com DATA SHEET TECHNICAL DATA: Input PARAMETER DESCRIPTION/CONDITION Input voltage range Universal Input Input frequency range 47-63 Hz Input surge current 230 Vac (cold start) 65 A max. Safety ground leakage current 230 Vac 120 Vac @ 150 W 230 Vac @ 150 W < 300 μA 1.7 A 0.85 A Input current 90 - 264 Vac 120 – 390 Vdc Output PARAMETER DESCRIPTION/CONDITION Voltage Adjustment V1 ± 3% Transient Response Main output 50 to 100% load change, 50 Hz, 50% duty cycle, 0.1A / uSec < 10%, recovery time < 5 mSec Over Voltage Protection V1 110 to 150% rated max Over Current Protection Rated output current 110% Typical Short Circuit Protection Automatic recovery Efficiency >86% Set Point Accuracy ± 1% Rise Time < 100 mSec Ordering Information PRODUCT FAMILY VOLTS MAX LOAD MAX LOAD (VDC) CONVECTION (1) 300 LFM (1) MINIMUM LOAD (A) RIPPLE & NOISE (4) CONNECTOR TOTAL REGULATION ABC150-1005G 5.0 16.0 A 16 A 0 1% JST ± 2.5% ABC150-1T05G 5.0 16.0 A 20 A 0 1% Screw Terminal ± 2.5% ABC150-1012G 12 8.33 A 12.5 A 0 1% JST ± 2.5% ABC150-1T12G 12 8.33 A 12.5 A 0 1% Screw Terminal ± 2.5% ABC150-1015G 15 6.67 A 10.0 A 0 1% JST ± 2.5% ABC150-1T15G 15 6.67 A 10.0 A 0 1% Screw Terminal ± 2.5% ABC150-1024G 24 4.17 A 6.25 A 0 1% JST ± 2.5% ABC150-1T24G 24 4.17 A 6.25 A 0 1% Screw Terminal ± 2.5% ABC150-1048G 48 2.08 A 3.13 A 0 1% JST ± 2.5% ABC150-1T48G 48 2.08 A 3.13 A 0 1% Screw Terminal ± 2.5% Vfan (all models) 12 0.5 A (3) 0.5 A (3) 0 ABC150 Series 2 20% www.power-one.com DATA SHEET Notes: 1. 2. 3. 4. 5. 6. 7. 8. 9. Combined power from main output and Vfan should not exceed total power rating. Fan output tolerance is ± 20% Peak power for fan output is 1 A. Ripple is 2% up to 20% load and less than 1% above 20% load. Output noise measurement is made with a 20 MHz bandwidth using a 6” twisted pair, terminated with a 10 uF tantalum capacitor in parallel with a 0.1 uF ceramic capacitor. Specifications are for nominal input voltage, 25° C and max load unless otherwise stated. Air flow over length of supply recommended (either direction) for forced air rating. Class 1 models have Earthing tab J4. Class 2 models (-2 suffix) have no Earthing tab. Specifications subject to change without notice. Warranty 2 years. General Specifications PARAMETER Hold Up Time MTBF Switching Frequency Isolation Voltage Weight DESCRIPTION/CONDITION 120 Vac 230 Vac >200 khrs PFC converter variable 35 to 250 kHz, 90 kHz typical Input to Output Min 4242 Vdc 150 g (0.33 lbs) 6 mSec 10 mSec Bellcore TR-332 Resonant converter: Variable 35 to 250 kHz, 90 kHz typical Input to Ground 2120 Vdc Environmental PARAMETER Operating Temperature Altitude Conducted emissions: Humidity Radiated Emissions Electromagnetic Susceptibility Harmonic Current DESCRIPTION/CONDITION Operating Storage Operating 10,000 ft. EN55022, FCC part 15 Level B 95% EN55022, FCC part 15 Level B EN61000-4-2 Level 3 EN61000-3-2, Class D -20 to +70° C. See derating chart below. -40 to +85° C Non-operation 40,000 ft. Non-Condensing To be controlled in end system 2, 3, 4, 5 Level 3 Safety PARAMETER DESCRIPTION/CONDITION EN / UL / CSA EN60950-1+A12:2011, IEC60950-1 2nd+A1 2009, CSA-22.2 No 60950-01-07+ A1, UL60950-1-2011 BCD.00283_AA_September-18-2013 3 www.power-one.com DATA SHEET Figure 1 Output Power Vs. Temperature Figure 2 Dimension Drawing (Top and Side View) Mechanical INPUT = J1 EARTHING TAB = J4 DC OUTPUT = J2 Pin 1: AC Line Pin 2: AC Neutral Molex: 19705-4301 Pin 1 = V1 Pin 2 = V1 Pin 3 = RTN Pin 4 = RTN Mating Connector: Molex: 09-50-3031 Pins: 08-50-0106 Mating Connector: Molex: 190030001 Mating Connector: JST VHR-4M, Pins: SVH-41T-P1.1 AWG #20 to #16 FAN= J3 Pin 1 = +12 V @ 0.5 A Pin 2 = Fan return (isolated from DC output) Mating Connector: Tyco: 640440-2 Copyright © 2010 Power-One Inc. All rights reserved. Words and logos that are identified as trademarks and/or service marks are, unless noted otherwise, the trademarks and service marks of Power-One Inc. in the U.S. and other countries. All other product or service names are the property of their respective holders. Power-One products are protected under numerous U.S. and foreign patents and pending applications, maskwork rights, and copyrights. Power-One reserves the right to make changes to any products and services at any time without notice. Power-One assumes no responsibility or liability arising out of the application or use of any information, product, or service described herein except as expressly agreed to in writing by Power-One Inc. NUCLEAR AND MEDICAL APPLICATIONS - Power-One products are not designed, intended for use in, or authorized for use as critical components in life support systems, equipment used in hazardous environments, or nuclear control systems without the express written consent of the respective divisional president of Power-One, Inc. TECHNICAL REVISIONS - The appearance of products, including safety agency certifications pictured on labels, may change depending on the date manufactured. Specifications are subject to change without notice. ABC150 Series 4 www.power-one.com