ROHM RB162L-60

Schottky Barrier Diode
RB162L-60
Dimensions (Unit : mm)
Land size figure (Unit : mm)
2.0
2.0
Applications
General rectification
4.2
Features
1) Small power mold type. (PMDS)
2) High switching speed
3) Low forward voltage
PMDS
Construction
Silicon epitaxial planer
Structure
Taping dimensions (Unit : mm)
Absolute maximum ratings (Tl=25C)
Parameter
Symbol
Repetitive peak reverse voltage
VRM
Reverse voltage
VR
Average rectified forward current
Io
Forward current surge peak
IFSM
Junction temperature
Storage temperature
Tj
Tstg
Electrical characteristics (Tj=25C)
Parameter
Symbol
Forward voltage
VF
Reverse current
IR
www.rohm.com
©2010 ROHM Co., Ltd. All rights reserved.
Conditions
D0.5
Limits
60
Unit
V
Direct voltage
Glass epoxy substrate mounted
R-road, 60Hz half sin wave
60Hz half sin wave, Non-repetitive
one cycle peak value, Tj=25C
60
V
1.0
A
20
A
150
-40 to +150
C
C
Conditions
IF=1.0A
VR=60V
1/3
Min.
-
Typ.
0.54
4
Max.
0.65
100
Unit
V
μA
2010.02 - Rev.A
RB162L-60
Data Sheet
Electrical characteristics curves
1
1000
100000
Tj=150C
Tj=125C
0.1
Tj=25C
Tj=25C
f=1MHz
10000
100
1000
Tj=125C
100
10
Tj=25C
10
1
0.01
1
0.1
0
100
200
300
400
500
600
700
0
FORWARD VOLTAGE : V F(mV)
VF-IF CHARACTERISTICS
10
20
30
40
50
0
60
510
500
AVE : 515.2mV
490
15
20
25
30
200
Tj=25C
VR=60V
n=20pcs
10
Tj=25C
f=1MHz
VR=0V
n=10pcs
190
CAPACITANCE BETWEEN
TERMINALS:Ct(pF)
520
REVERSE CURRENT : IR(A)
530
10
REVERSE VOLTAGE : VR(V)
VR-Ct CHARACTERISTICS
100
Tj=25C
IF=1.0A
n=20pcs
540
5
REVERSE VOLTAGE : VR(V)
VR-IR CHARACTERISTICS
550
FORWARD VOLTAGE : VF(mV)
Tj=125C
CAPACITANCE BETWEEN
TERMINALS : Ct(pF)
REVERSE CURRENT : IR(A)
FORWARD CURRENT : IF(A)
Tj=150C
180
170
160
150
AVE : 168.0pF
140
130
120
AVE : 6.0A
110
480
1
VF DISPERSION MAP
120
Ct DISPERSION MAP
30
100
8.3ms
80
60
AVE : 80.8A
40
20
100
Tj=25C
IF=0.1A
IR=0.1A
Irr=0.1*IR
n=10pcs
20
10
AVE : 11.6ns
PEAK SURGE
FORWARD CURRENT : IFSM(A)
1cyc
Ifsm
RESERVE RECOVERY TIME : trr(ns)
ITS ABILITY OF PEAK SURGE
FORWARD CURRENT : IFSM(A)
100
IR DISPERSION MAP
Ability
10
Ratings
Ifsm
8.3ms 8.3ms
1cyc
0
1
0
1
trr DISPERSION MAP
IFSM DISRESION MAP
1000
ELECTROSTATIC
DISCHARGE TEST ESD(KV)
PEAK SURGE
FORWARD CURRENT : IFSM(A)
Ability
100
10
Ratings
25
20
15
10
AVE : 5.0kV
5
1
0
1
10
100
TIME : t(ms)
IFSM-t CHARACTERISTICS
www.rohm.com
©2010 ROHM Co., Ltd. All rights reserved.
C=100pF
R=1.5k
C=200pF
R=0
ESD DISPERSION MAP
2/3
TRANSIENT
THAERMAL IMPEDANCE : Rth (C/W)
No break at 30kV
t
100
1000
30
Ifsm
10
NUMBER OF CYCLES
IFSM-CYCLE CHARACTERISTICS
Rth(j-a)
On glass-epoxy substrade
soldering land 2mm 2
100
Rth(j-l)
10
Rth(j-a)
On glass-epoxy substrade
soldering land 10mm 2
1
0.1
0.001
0.01
0.1
1
10
100
1000
TIME : t(s)
Rth-t CHARACTERISTICS
2010.02 - Rev.A
RB162L-60
0A
0V
Io
VR
0A
0V
1.4
D=0.8
D.C.
1.2
1
0.8
0.6
D=0.5
0.4
0.2
D.C.
1.6
t
1.4
D=0.5
1.2
D=0.8
1
0.8
half sin wave
0.6
0.4
0.2
half sin wave
0
30
60
90
120
150
AMBIENT TEMPERATURE : Ta(C)
Derating Curve"(Io-Ta)
Io
0V
VR
t
D=t/T
VR=30V
Tj=150C
T
D.C.
1.6
1.4
D=0.5
1.2
D=0.8
1
0.8
half sin wave
0.6
0.4
0.2
0
0
0A
1.8
AVERAGE RECTIFIED
FORWARD CURRENT : Io(A)
AVERAGE RECTIFIED
FORWARD CURRENT : Io(A)
1.6
1.8
AVERAGE RECTIFIED
FORWARD CURRENT : Io(A)
VR=30V
T
Tj=150C
On glass-epoxy
substrate soldering land 2mm
Io
VR
D=t/T
VR=30V
T
Tj=150C
On glass-epoxy
substrate soldering land 10mm
t
1.8
Data Sheet
0
0
30
60
90
120
AMBIENT TEMPERATURE : Ta(C)
Derating Curve"(Io-Ta)
150
0
30
60
90
120
150
CASE TEMPARATURE : Tl(C)
Derating Curve"(Io-Tl)
1.4
D.C.
1.2
FORWARD POWER
DISSIPATION : Pf(W)
D=0.8
1
D=0.5
0.8
half sin wave
0.6
0.4
0.2
0
0
0.3
0.6
0.9
1.2
1.5
1.8
AVERAGE RECTIFIED
FORWARD CURRENT : Io(A)
Io-Pf CHARACTERISTICS
www.rohm.com
©2010 ROHM Co., Ltd. All rights reserved.
3/3
2010.02 - Rev.A
Notice
Notes
No copying or reproduction of this document, in part or in whole, is permitted without the
consent of ROHM Co.,Ltd.
The content specified herein is subject to change for improvement without notice.
The content specified herein is for the purpose of introducing ROHM's products (hereinafter
"Products"). If you wish to use any such Product, please be sure to refer to the specifications,
which can be obtained from ROHM upon request.
Examples of application circuits, circuit constants and any other information contained herein
illustrate the standard usage and operations of the Products. The peripheral conditions must
be taken into account when designing circuits for mass production.
Great care was taken in ensuring the accuracy of the information specified in this document.
However, should you incur any damage arising from any inaccuracy or misprint of such
information, ROHM shall bear no responsibility for such damage.
The technical information specified herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or
implicitly, any license to use or exercise intellectual property or other rights held by ROHM and
other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the
use of such technical information.
The Products specified in this document are intended to be used with general-use electronic
equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices).
The Products specified in this document are not designed to be radiation tolerant.
While ROHM always makes efforts to enhance the quality and reliability of its Products, a
Product may fail or malfunction for a variety of reasons.
Please be sure to implement in your equipment using the Products safety measures to guard
against the possibility of physical injury, fire or any other damage caused in the event of the
failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM
shall bear no responsibility whatsoever for your use of any Product outside of the prescribed
scope or not in accordance with the instruction manual.
The Products are not designed or manufactured to be used with any equipment, device or
system which requires an extremely high level of reliability the failure or malfunction of which
may result in a direct threat to human life or create a risk of human injury (such as a medical
instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuelcontroller or other safety device). ROHM shall bear no responsibility in any way for use of any
of the Products for the above special purposes. If a Product is intended to be used for any
such special purpose, please contact a ROHM sales representative before purchasing.
If you intend to export or ship overseas any Product or technology specified herein that may
be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to
obtain a license or permit under the Law.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
ROHM Customer Support System
http://www.rohm.com/contact/
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
R1010A