DTA124EUA(SOT 323)

WILLAS
FM120-M+
DTA124EUA THRU
PNP Digital Transistor
FM1200-M
1.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERS -20V- 200V
Pb Free Produc
SOD-123+ PACKAGE
Package outline
Features
• Batch process design, excellent power dissipation offers
better reverse leakage current and thermal resistance.
SOD-123H
• Low profile surface mounted application in order to
optimize board space.
Features
• Low power loss, high efficiency.
•
SOT-323
0.146(3.7)
0.130(3.3)
•
•
•
0.012(0.3) Typ.
.004(0.10)MIN.
Pb-Free
package is available
• High current capability, low forward voltage drop.
RoHS•product
forcapability.
packing code suffix ”G”
High surge
Guardring
for
overvoltage
protection.
•
Halogen free product
for packing
code suffix “H”
• Ultra high-speed switching.
Epoxy meets UL 94 V-0 flammability rating
• Silicon epitaxial planar chip, metal silicon junction.
Moisure Sensitivity Level 1
• Lead-free parts meet environmental standards of
.096(2.45)
.078(2.00)
Built-in bias
resistors enable the configuration of an inverter circuit
MIL-STD-19500 /228
without• connecting
input
RoHS productexternal
for packing
coderesistors
suffix "G"
• The biasHalogen
resistors
consist
of
thin-film
resistors
with complete
free product for packing code
suffix "H"
isolation
to
allow
negative
biasing
of
the
input.
They also have the
Mechanical data
advantage of almost completely eliminating parasitic effects.
rated flame retardant
• Epoxy
• Only the
on/off: UL94-V0
conditions
need to be set for operation, making
Case
:
Molded
plastic,
SOD-123H
•
device design easy
,
Terminals :Plated terminals, solderable per MIL-STD-750
Absolute•maximum
ratings @ 25к
0.071(1.8)
0.056(1.4)
0.040(1.0)
0.024(0.6)
.010(0.25)
.003(0.08)
0.031(0.8) Typ.
0.031(0.8) Typ.
.054(1.35)
.045(1.15)
Method 2026
Symbol
Parameter
Min
Typ
Max
Unit
.087(2.20)
Dimensions in inches and (millimeters)
• Supply
Polarity
: Indicated by cathode band --VCC
voltage
-50
--V
.070(1.80)
VIN
Input voltage
-40
--10
V
• Mounting Position : Any
-30
IO
current
----mA
IC(MAX)
-100
• Output
Weight : Approximated 0.011 gram
Pd
Power dissipation
--200
--mW
Tj
JunctionMAXIMUM
temperature RATINGS AND ELECTRICAL
--150
--- CHARACTERISTICS
ć
Tstg
Storage temperature
-55
--150
ć
Ratings at 25℃ ambient temperature unless otherwise specified.
Single phase half wave, 60Hz, resistive of inductive load.
For capacitive load, derate current by 20%
.056(1.40)
SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-M
Symbol
Parameter
Min
Typ
Marking Code
VI(off)
-0.5
--Input voltage (VCC=-5V, IO=-100­A)
Maximum Recurrent Peak
Voltage
VRRM --V
(VReverse
--I(on)
O=-0.2V, IO=-5mA)
VMaximum
Output
voltage
=
(IO/II -10mA/-0.5mA
---VRMS --RMS
Voltage
O(on)
II
=
Input
currentVoltage
(VI -5V)
----Maximum
DC
Blocking
VDC
IO(off)
Output current (VCC=
=-50V, VI 0)
----Maximum
Average
Forward
Rectified
GI
DC current
gain (V
=
ICurrent
56 IO --O=-5V,
O -5mA)
R1
Input resistance
15.4
22
Peak Forward Surge Current 8.3 ms single half sine-wave
R2/R1
Resistance ratio
0.8IFSM 1.0
superimposed
on ratedfrequency
load (JEDEC method)
Transition
fT
--250
(VO =-10V,
IO=5mA,
f=100MHz)
Typical Thermal
Resistance
(Note
2)
RΘJA
CJ
Typical Junction Capacitance (Note 1)
TJ
Operating Temperature Range
Storage Temperature Range
Max
12
--20
-3.0
14 -0.3
20 -0.36
-0.5
--28.6
1.2
---
Unit
13
V
30 V
21 V
30 mA
­A
Rated DC Blocking Voltage
35
50
42
56
60
80
.004(0.10)MAX.
1.0
115
150
120
200
70
105
140
100
150
200
30
.016(0.40)
.008(0.20)
40
120
-55 to +125
-55 to +150
- 65 to +175
Dimensions
in inches and (millimeters)
0.50
0.70
0.85
Pad Layout
15
@T A=125℃
NOTES:
0.9
0.5
0.70
IR
0.92
10
0.90
1- Measured at 1 MHZ and applied reverse voltage of 4.0 VDC.
10
100
FM180-MH
FM1100-MH FM1150-MH FM1200-MH
SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH
Suggested
Solder
VF
*Marking:
Maximum Average Reverse Current at @T
A=25℃
28
40
MHz
CHARACTERISTICS
16 .047(1.20)
18
60
80
15
50
K¡
TSTG
Maximum Forward Voltage at 1.0A DC
14
40
.043(1.10)
.032(0.80)
Electrical Characteristics
@ 25к
RATINGS
1.90 mm
2- Thermal Resistance From Junction to Ambient
0.65
0.65
2012-06
2012-0
WILLAS ELECTRONIC COR
WILLAS ELECTRONIC CORP.
WILLAS
FM120-M
DTA124EUA THRU
PNP Digital Transistor
FM1200-M
1.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERS -20V- 200V
Pb Free Produ
SOD-123+ PACKAGE
Package outline
Features
• Batch process design, excellent power dissipation offers
better reverse leakage current and thermal resistance.
SOD-123H
• Low profile surface mounted application in order to
optimize board space.
• Low power loss, high efficiency.
• High current capability, low forward voltage drop.
• High surge capability.
• Guardring for overvoltage protection.
• Ultra high-speed switching.
• Silicon epitaxial planar chip, metal silicon junction.
• Lead-free parts meet environmental standards of
0.146(3.7)
0.130(3.3)
0.012(0.3) Typ.
0.071(1.8)
0.056(1.4)
MIL-STD-19500 /228
• RoHS product for packing code suffix "G"
Halogen free product for packing code suffix "H"
Mechanical data
0.040(1.0)
0.024(0.6)
• Epoxy : UL94-V0 rated flame retardant
• Case : Molded plastic, SOD-123H
,
• Terminals :Plated terminals, solderable per MIL-STD-750
0.031(0.8) Typ.
0.031(0.8) Typ.
Method 2026
• Polarity : Indicated by cathode band
• Mounting Position : Any
• Weight : Approximated 0.011 gram
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25℃ ambient temperature unless otherwise specified.
Single phase half wave, 60Hz, resistive of inductive load.
For capacitive load, derate current by 20%
RATINGS
SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-M
Marking Code
Maximum Recurrent Peak Reverse Voltage
VRRM
12
20
13
30
Maximum RMS Voltage
VRMS
14
21
28
Maximum DC Blocking Voltage
VDC
20
30
40
Maximum Average Forward Rectified Current
IO
IFSM
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
RΘJA
Typical Thermal Resistance (Note 2)
Typical Junction Capacitance (Note 1)
CJ
Operating Temperature Range
TJ
Storage Temperature Range
14
40
15
50
16
60
18
80
10
100
115
150
120
200
35
42
50
60
56
70
105
140
80
100
150
200
1.0
30
40
120
-55 to +125
-55 to +150
- 65 to +175
TSTG
CHARACTERISTICS
SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-M
VF
Maximum Forward Voltage at 1.0A DC
Maximum Average Reverse Current at @T A=25℃
Rated DC Blocking Voltage
@T A=125℃
IR
0.50
0.70
0.85
0.9
0.5
0.92
10
NOTES:
1- Measured at 1 MHZ and applied reverse voltage of 4.0 VDC.
2- Thermal Resistance From Junction to Ambient
2012-0
2012-06
WILLAS ELECTRONIC COR
WILLAS ELECTRONIC CORP.
WILLAS
FM120-M+
DTA124EUA THRU
PNP Digital Transistor
FM1200-M
1.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERS -20V- 200V
Features
Pb Free Produc
SOD-123+ PACKAGE
Package outline
• Batch process design, excellent power dissipation offers
better reverse leakage current and thermal resistance.
SOD-123H
• Low profile surface mounted application in order to
optimize board space.
0.146(3.7)
loss, high efficiency.
• Low power Device PN Packing 0.130(3.3)
• High current capability,
(1) low
(2)forward voltage drop.
DTA124EUA –T
G
‐WS Tape& Reel: 3 Kpcs/Reel • High surge capability.
Note: (1)
Packing code, Tape & Reel Packing for overvoltage protection.
• Guardring
• Ultra high-speed switching.
(2) RoHS product for packing code suffix ”G”;Halogen free product for packing code suffix “H” • Silicon epitaxial planar chip, metal silicon junction.
parts meet environmental standards of
• Lead-free
MIL-STD-19500 /228
• RoHS product for packing code suffix "G"
Halogen free product for packing code suffix "H"
Ordering Information: 0.012(0.3) Typ.
0.071(1.8)
0.056(1.4)
Mechanical data
• Epoxy : UL94-V0 rated flame retardant
• Case : Molded plastic, SOD-123H
,
• Terminals :Plated terminals, solderable per MIL-STD-750
0.040(1.0)
0.024(0.6)
0.031(0.8) Typ.
0.031(0.8) Typ.
Method 2026
• Polarity : Indicated by cathode band
• Mounting Position : Any
• Weight : Approximated 0.011 gram
Dimensions in inches and (millimeters)
***Disclaimer*** MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
WILLAS reserves the right to make changes without notice to any product Ratings at 25℃ ambient temperature unless otherwise specified.
specification herein, to make corrections, modifications, enhancements or other Single phase half wave, 60Hz, resistive of inductive load.
changes. WILLAS or anyone on its behalf assumes no responsibility or liability load, derate current by 20%
For capacitive
SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH
RATINGS
for any errors or inaccuracies. Data sheet specifications and its information Marking Code
12
13
14
15
16
18
10
115
120
contained are intended to provide a product description only. "Typical" parameters 20
30
40
50
60
80
100
150
200
Maximum Recurrent Peak Reverse Voltage
VRRM
14
21
28
35
42
56
70
105
140
Maximum
RMS Voltage
VRMS
which may be included on WILLAS data sheets and/ or specifications can Maximum DC Blocking Voltage
20
30
40
50
60
80
100
150
200
VDC
and do vary in different applications and actual performance may vary over time. Maximum Average Forward Rectified Current
IO
1.0
WILLAS does not assume any liability arising out of the application or Peak Forward Surge Current 8.3 ms single half sine-wave
30
IFSM
use of any product or circuit. superimposed
on rated load (JEDEC method)
40
Typical Thermal Resistance (Note 2)
RΘJA
120
Typical Junction Capacitance (Note 1)
CJ
WILLAS products are not designed, intended or authorized for use in medical, -55
to
+125
-55 to +150
Operating Temperature Range
TJ
- 65 to +175
TSTG
life‐saving implant or other applications intended for life‐sustaining or other related applications where a failure or malfunction of component or circuitry may directly CHARACTERISTICS
SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH
0.9
Maximum
Forward Voltage at 1.0A DC
0.92
VF
0.50
0.70
0.85
or indirectly cause injury or threaten a life without expressed written approval 0.5
Maximum Average Reverse Current at @T A=25℃
IR
of WILLAS. Customers using or selling WILLAS components for use in 10
@T A=125℃
Rated DC Blocking Voltage
such applications do so at their own risk and shall agree to fully indemnify WILLAS NOTES:
1- Measured
at 1 MHZ and applied reverse voltage of 4.0 VDC.
Inc and its subsidiaries harmless against all claims, damages and expenditures
. Storage Temperature Range
2- Thermal Resistance From Junction to Ambient
2012-06
2012-0
WILLAS ELECTRONIC COR
WILLAS ELECTRONIC CORP.
Similar pages