CYPRESS CY8C24994

PSoC® Mixed-Signal Array
Final Data Sheet
CY8C24094, CY8C24794,
CY8C24894, and CY8C24994
Features
■ CY8C24894 includes an XRES pin to support In-System Serial Programming (ISSP) and external reset control
■ Powerful Harvard Architecture Processor
❐ M8C Processor Speeds to 24 MHz
❐ Two 8x8 Multiply, 32-Bit Accumulate
❐ Low Power at High Speed
❐ 3.0 to 5.25V Operating Voltage
❐ Industrial Temperature Range: -40°C to +85°C
❐ USB Temperature Range: -10°C to +85°C
■ Advanced Peripherals (PSoC Blocks)
❐ 6 Rail-to-Rail Analog PSoC Blocks Provide:
- Up to 14-Bit ADCs
- Up to 9-Bit DACs
- Programmable Gain Amplifiers
- Programmable Filters and Comparators
❐ 4 Digital PSoC Blocks Provide:
- 8- to 32-Bit Timers, Counters, and PWMs
- CRC and PRS Modules
- Full-Duplex UART
- Multiple SPI™ Masters or Slaves
- Connectable to all GPIO Pins
❐ Complex Peripherals by Combining Blocks
❐ Capacitive Sensing Application Capability
Port 5
System Bus
Port 7
Port 4
Port 3
Global Digital Interconnect
Port 2
Port 1
■ Full-Speed USB (12 Mbps)
❐ Four Uni-Directional Endpoints
❐ One Bi-Directional Control Endpoint
❐ USB 2.0 Compliant
❐ Dedicated 256 Byte Buffer
❐ No External Crystal Required
■ Flexible On-Chip Memory
❐ 16K Flash Program Storage 50,000 Erase/
Write Cycles
❐ 1K SRAM Data Storage
❐ In-System Serial Programming (ISSP)
❐ Partial Flash Updates
❐ Flexible Protection Modes
❐ EEPROM Emulation in Flash
■ Programmable Pin Configurations
❐ 25 mA Sink on all GPIO
❐ Pull up, Pull down, High Z, Strong, or Open
Drain Drive Modes on all GPIO
❐ Up to 48 Analog Inputs on GPIO
❐ Two 33 mA Analog Outputs on GPIO
❐ Configurable Interrupt on all GPIO
Port 0
Analog
Drivers
Global Analog Interconnect
PSoC CORE
SRAM
1K
SROM
Flash 16K
CPU Core (M8C)
Interrupt
Controller
Sleep and
Watchdog
ANALOG SYSTEM
Analog
Ref.
Digital
Block
Array
Digital
2
Decimator
Clocks MACs Type 2
Internal
POR and LVD
Voltage
System Resets
Ref.
USB
❐ I2C™ Slave, Master, and Multi-Master to
400 kHz
❐ Watchdog and Sleep Timers
❐ User-Configurable Low Voltage Detection
❐ Integrated Supervisory Circuit
❐ On-Chip Precision Voltage Reference
■ Complete Development Tools
❐ Free Development Software
(PSoC Designer™)
❐ Full-Featured, In-Circuit Emulator and
Programmer
❐ Full Speed Emulation
❐ Complex Breakpoint Structure
❐ 128K Bytes Trace Memory
PSoC® Functional Overview
The PSoC® family consists of many Mixed-Signal Array with
On-Chip Controller devices. All PSoC family devices are
designed to replace traditional MCUs, system ICs, and the
numerous discrete components that surround them. The PSoC
CY8C24x94 devices are unique members of the PSoC family
because it includes a full-featured, full-speed (12 Mbps) USB
port. Configurable analog, digital, and interconnect circuitry
enable a high level of integration in a host of industrial, consumer, and communication applications.
The PSoC architecture, as illustrated on the left, is comprised of
four main areas: PSoC Core, Digital System, Analog System,
and System Resources including a full-speed USB port. Configurable global busing allows all the device resources to be combined into a complete custom system. The PSoC CY8C24x94
devices can have up to seven IO ports that connect to the global digital and analog interconnects, providing access to 4 digital blocks and 6 analog blocks.
Analog
Block
Array
I2C
■ Additional System Resources
This architecture allows the user to create customized peripheral configurations that match the requirements of each individual application. Additionally, a fast CPU, Flash program
memory, SRAM data memory, and configurable IO are included
in a range of convenient pinouts and packages.
ClockSources
(Includes IMO and ILO)
DIGITAL SYSTEM
■ Precision, Programmable Clocking
❐ Internal ±4% 24/48 MHz Oscillator
❐ Internal Oscillator for Watchdog and Sleep
❐ .25% Accuracy for USB with no External
Components
Analog
Input
Muxing
SYSTEM RESOURCES
February 15, 2007
© Cypress Semiconductor 2004-2007 — Document No. 38-12018 Rev. *J
1
[+] Feedback
CY8C24094, CY8C24794, CY8C24894, and CY8C24994 Final Data Sheet
The PSoC Core
Digital peripheral configurations include those listed below.
The PSoC Core is a powerful engine that supports a rich feature set. The core includes a CPU, memory, clocks, and configurable GPIO (General Purpose IO).
The M8C CPU core is a powerful processor with speeds up to
24 MHz, providing a four MIPS 8-bit Harvard architecture microprocessor. The CPU utilizes an interrupt controller with up to 20
vectors, to simplify programming of real time embedded events.
Program execution is timed and protected using the included
Sleep and Watch Dog Timers (WDT).
Memory encompasses 16K of Flash for program storage, 1K of
SRAM for data storage, and up to 2K of EEPROM emulated
using the Flash. Program Flash utilizes four protection levels on
blocks of 64 bytes, allowing customized software IP protection.
The PSoC device incorporates flexible internal clock generators, including a 24 MHz IMO (internal main oscillator) accurate
to 8% over temperature and voltage. The 24 MHz IMO can also
be doubled to 48 MHz for use by the digital system. A low
power 32 kHz ILO (internal low speed oscillator) is provided for
the Sleep timer and WDT. The clocks, together with programmable clock dividers (as a System Resource), provide the flexibility to integrate almost any timing requirement into the PSoC
device. In USB systems, the IMO will self-tune to ± 0.25% accuracy for USB communication.
PSoC GPIOs provide connection to the CPU, digital and analog
resources of the device. Each pin’s drive mode may be selected
from eight options, allowing great flexibility in external interfacing. Every pin also has the capability to generate a system interrupt on high level, low level, and change from last read.
The Digital System
The Digital System is composed of 4 digital PSoC blocks. Each
block is an 8-bit resource that can be used alone or combined
with other blocks to form 8, 16, 24, and 32-bit peripherals, which
are called user module references.
Digital System Block Diagram
Port 7
Port 5
Port 3
Port 4
Port 1
Port 2
To System Bus
Digital Clocks
FromCore
Port 0
ToAnalog
System
DIGITAL SYSTEM
Digital PSoC Block Array
Row Input
Configuration
8
Row 0
DBB00
DBB01
DCB02
4
DCB03
4
GIE[7:0]
GIO[7:0]
February 15, 2007
GlobalDigital
Interconnect
Row Output
Configuration
8
PSoC® Overview
8
8
■
Full-Speed USB (12 Mbps)
■
PWMs (8 to 32 bit)
■
PWMs with Dead band (8 to 24 bit)
■
Counters (8 to 32 bit)
■
Timers (8 to 32 bit)
■
UART 8 bit with selectable parity
■
SPI master and slave
■
I2C slave and multi-master
■
Cyclical Redundancy Checker/Generator (8 to 32 bit)
■
IrDA
■
Pseudo Random Sequence Generators (8 to 32 bit)
The digital blocks can be connected to any GPIO through a
series of global buses that can route any signal to any pin. The
buses also allow for signal multiplexing and for performing logic
operations. This configurability frees your designs from the constraints of a fixed peripheral controller.
Digital blocks are provided in rows of four, where the number of
blocks varies by PSoC device family. This allows you the optimum choice of system resources for your application. Family
resources are shown in the table titled PSoC Device Characteristics.
The Analog System
The Analog System is composed of 6 configurable blocks, each
comprised of an opamp circuit allowing the creation of complex
analog signal flows. Analog peripherals are very flexible and
can be customized to support specific application requirements.
Some of the more common PSoC analog functions (most available as user modules) are listed below.
■
Analog-to-digital converters (up to 2, with 6- to 14-bit resolution, selectable as Incremental, Delta Sigma, and SAR)
■
Filters (2 and 4 pole band-pass, low-pass, and notch)
■
Amplifiers (up to 2, with selectable gain to 48x)
■
Instrumentation amplifiers (1 with selectable gain to 93x)
■
Comparators (up to 2, with 16 selectable thresholds)
■
DACs (up to 2, with 6- to 9-bit resolution)
■
Multiplying DACs (up to 2, with 6- to 9-bit resolution)
■
High current output drivers (two with 30 mA drive as a PSoC
Core Resource)
■
1.3V reference (as a System Resource)
■
DTMF Dialer
■
Modulators
■
Correlators
■
Peak Detectors
■
Many other topologies possible
GOE[7:0]
GOO[7:0]
Document No. 38-12018 Rev. *J
2
[+] Feedback
CY8C24094, CY8C24794, CY8C24894, and CY8C24994 Final Data Sheet
Analog blocks are arranged in a column of three, which
includes one CT (Continuous Time) and two SC (Switched
Capacitor) blocks, as shown in the figure below.
Analog System Block Diagram
All IO
(Except Port 7)
PSoC® Overview
The Analog Multiplexer System
The Analog Mux Bus can connect to every GPIO pin in ports 05. Pins can be connected to the bus individually or in any combination. The bus also connects to the analog system for analysis with comparators and analog-to-digital converters. It can be
split into two sections for simultaneous dual-channel processing. An additional 8:1 analog input multiplexer provides a second path to bring Port 0 pins to the analog array.
P0[6]
P0[5]
P0[4]
P0[3]
P0[2]
P0[1]
P0[0]
Switch control logic enables selected pins to precharge continuously under hardware control. This enables capacitive measurement for applications such as touch sensing. Other
multiplexer applications include:
P2[6]
■
Track pad, finger sensing.
■
Chip-wide mux that allows analog input from up to 48 IO
pins.
■
Crosspoint connection between any IO pin combinations.
Analog
Mux Bus
AGNDIn RefIn
P0[7]
P2[3]
P2[1]
P2[4]
P2[2]
P2[0]
When designing capacitive sensing applications, refer to the latest signal-to-noise signal level requirements Application Notes,
which can be found under http://www.cypress.com >> DESIGN
RESOURCES >> Application Notes. In general, and unless otherwise noted in the relevant Application Notes, the minimum
signal-to-noise ratio (SNR) for CapSense applications is 5:1.
ACI0[1:0]
ACI1[1:0]
Array Input
Configuration
Block
Array
Additional System Resources
ACB00
ACB01
ASC10
ASD11
ASD20
ASC21
System Resources, provide additional capability useful to complete systems. Additional resources include a multiplier, decimator, low voltage detection, and power on reset. Brief
statements describing the merits of each resource follow.
■
Full-Speed USB (12 Mbps) with 5 configurable endpoints and
256 bytes of RAM. No external components required except
two series resistors. Wider than commercial temperature
USB operation (-10°C to +85°C).
■
Digital clock dividers provide three customizable clock frequencies for use in applications. The clocks can be routed to
both the digital and analog systems. Additional clocks can be
generated using digital PSoC blocks as clock dividers.
■
Two multiply accumulates (MACs) provide fast 8-bit multipliers with 32-bit accumulate, to assist in both general math as
well as digital filters.
■
Decimator provides a custom hardware filter for digital signal
processing apps. including creation of Delta Sigma ADCs.
■
The I2C module provides 100 and 400 kHz communication
over two wires. Slave, master, multi-master are supported.
■
Low Voltage Detection (LVD) interrupts signal the application
of falling voltage levels, while the advanced POR (Power On
Reset) circuit eliminates the need for a system supervisor.
■
An internal 1.3V reference provides an absolute reference for
the analog system, including ADCs and DACs.
■
Versatile analog multiplexer system.
AnalogReference
Interface to
Digital System
RefHi
RefLo
AGND
Reference
Generators
AGNDIn
RefIn
Bandgap
M8C Interface (Address Bus, Data Bus, Etc.)
February 15, 2007
Document No. 38-12018 Rev. *J
3
[+] Feedback
CY8C24094, CY8C24794, CY8C24894, and CY8C24994 Final Data Sheet
PSoC® Overview
PSoC Device Characteristics
Getting Started
Depending on your PSoC device characteristics, the digital and
analog systems can have 16, 8, or 4 digital blocks and 12, 6, or
4 analog blocks. The following table lists the resources
available for specific PSoC device groups. The device covered
by this data sheet is shown in the highlighted row of the table
The quickest path to understanding the PSoC silicon is by reading this data sheet and using the PSoC Designer Integrated
Development Environment (IDE). This data sheet is an overview of the PSoC integrated circuit and presents specific pin,
register, and electrical specifications. For in-depth information,
along with detailed programming information, reference the
PSoC Mixed-Signal Array Technical Reference Manual.
Digital
IO
Digital
Rows
Digital
Blocks
Analog
Inputs
Analog
Outputs
Analog
Columns
Analog
Blocks
SRAM
Size
Flash
Size
PSoC Device Characteristics
CY8C29x66
up to
64
4
16
12
4
4
12
2K
32K
CY8C27x43
up to
44
2
8
12
4
4
12
256
Bytes
16K
56
1
4
48
2
2
6
1K
16K
4K
PSoC Part
Number
CY8C24x94
CY8C24x23A
up to
24
1
4
12
2
2
6
256
Bytes
CY8C21x34
up to
28
1
4
28
0
2
4a
512
Bytes
8K
a
256
Bytes
4K
512
Bytes
8K
CY8C21x23
16
1
4
8
0
2
4
CY8C20x34
up to
28
0
0
28
0
0
3b
a. Limited analog functionality.
b. Two analog blocks and one CapSense.
For up-to-date Ordering, Packaging, and Electrical Specification
information, reference the latest PSoC device data sheets on
the web at http://www.cypress.com/psoc.
To determine which PSoC device meets your requirements,
navigate through the PSoC Decision Tree in the Application
Note AN2209 at http://www.cypress.com and select Application
Notes under the Design Resources.
Development Kits
Development Kits are available from the following distributors:
Digi-Key, Avnet, Arrow, and Future. The Cypress Online Store
contains development kits, C compilers, and all accessories for
PSoC development. Go to the Cypress Online Store web site at
http://www.cypress.com, click the Online Store shopping cart
icon at the bottom of the web page, and click PSoC (Programmable System-on-Chip) to view a current list of available items.
Technical Training Modules
Free PSoC technical training modules are available for users
new to PSoC. Training modules cover designing, debugging,
advanced
analog
and
CapSense.
Go
to
http://
www.cypress.com/techtrain.
Consultants
Certified PSoC Consultants offer everything from technical
assistance to completed PSoC designs. To contact or become a
PSoC Consultant go to http://www.cypress.com, click on Design
Support located on the left side of the web page, and select
CYPros Consultants.
Technical Support
PSoC application engineers take pride in fast and accurate
response. They can be reached with a 4-hour guaranteed
response at http://www.cypress.com/support/login.cfm.
Application Notes
A long list of application notes will assist you in every aspect of
your design effort. To view the PSoC application notes, go to
the http://www.cypress.com web site and select Application
Notes under the Design Resources list located in the center of
the web page. Application notes are listed by date as default.
February 15, 2007
Document No. 38-12018 Rev. *J
4
[+] Feedback
CY8C24094, CY8C24794, CY8C24894, and CY8C24994 Final Data Sheet
PSoC® Overview
Development Tools
PSoC Designer is a Microsoft® Windows-based, integrated
development environment for the Programmable System-onChip (PSoC) devices. The PSoC Designer IDE and application
runs on Windows NT 4.0, Windows 2000, Windows Millennium
(Me), or Windows XP. (Reference the PSoC Designer Functional Flow diagram below.)
PSoC Designer helps the customer to select an operating configuration for the PSoC, write application code that uses the
PSoC, and debug the application. This system provides design
database management by project, an integrated debugger with
In-Circuit Emulator, in-system programming support, and the
CYASM macro assembler for the CPUs.
PSoC Designer also supports a high-level C language compiler
developed specifically for the devices in the family.
PSoC Designer Subsystems
Graphical Designer
Interface
Context
Sensitive
Help
Results
Commands
PSoC
Designer
Importable
Design
Database
Device
Database
Application
Database
PSoC
Designer
Core
Engine
Project
Database
PSoC
Configuration
Sheet
Manufacturing
Information
File
User
Modules
Library
Emulation
Pod
February 15, 2007
In-Circuit
Emulator
Device
Programmer
Document No. 38-12018 Rev. *J
5
[+] Feedback
CY8C24094, CY8C24794, CY8C24894, and CY8C24994 Final Data Sheet
PSoC® Overview
PSoC Designer Software Subsystems
Device Editor
Debugger
The Device Editor subsystem allows the user to select different
onboard analog and digital components called user modules
using the PSoC blocks. Examples of user modules are ADCs,
DACs, Amplifiers, and Filters.
The PSoC Designer Debugger subsystem provides hardware
in-circuit emulation, allowing the designer to test the program in
a physical system while providing an internal view of the PSoC
device. Debugger commands allow the designer to read and
program and read and write data memory, read and write IO
registers, read and write CPU registers, set and clear breakpoints, and provide program run, halt, and step control. The
debugger also allows the designer to create a trace buffer of
registers and memory locations of interest.
The device editor also supports easy development of multiple
configurations and dynamic reconfiguration. Dynamic configuration allows for changing configurations at run time.
PSoC Designer sets up power-on initialization tables for
selected PSoC block configurations and creates source code
for an application framework. The framework contains software
to operate the selected components and, if the project uses
more than one operating configuration, contains routines to
switch between different sets of PSoC block configurations at
run time. PSoC Designer can print out a configuration sheet for
a given project configuration for use during application programming in conjunction with the Device Data Sheet. Once the
framework is generated, the user can add application-specific
code to flesh out the framework. It’s also possible to change the
selected components and regenerate the framework.
Online Help System
The online help system displays online, context-sensitive help
for the user. Designed for procedural and quick reference, each
functional subsystem has its own context-sensitive help. This
system also provides tutorials and links to FAQs and an Online
Support Forum to aid the designer in getting started.
Hardware Tools
In-Circuit Emulator
Design Browser
The Design Browser allows users to select and import preconfigured designs into the user’s project. Users can easily browse
a catalog of preconfigured designs to facilitate time-to-design.
Examples provided in the tools include a 300-baud modem, LIN
Bus master and slave, fan controller, and magnetic card reader.
Application Editor
In the Application Editor you can edit your C language and
Assembly language source code. You can also assemble, compile, link, and build.
A low cost, high functionality ICE (In-Circuit Emulator) is available for development support. This hardware has the capability
to program single devices.
The emulator consists of a base unit that connects to the PC by
way of a USB port. The base unit is universal and will operate
with all PSoC devices. Emulation pods for each device family
are available separately. The emulation pod takes the place of
the PSoC device in the target board and performs full speed (24
MHz) operation.
Assembler. The macro assembler allows the assembly code
to be merged seamlessly with C code. The link libraries automatically use absolute addressing or can be compiled in relative
mode, and linked with other software modules to get absolute
addressing.
C Language Compiler. A C language compiler is available
that supports the PSoC family of devices. Even if you have
never worked in the C language before, the product quickly
allows you to create complete C programs for the PSoC family
devices.
The embedded, optimizing C compiler provides all the features
of C tailored to the PSoC architecture. It comes complete with
embedded libraries providing port and bus operations, standard
keypad and display support, and extended math functionality.
February 15, 2007
Document No. 38-12018 Rev. *J
6
[+] Feedback
CY8C24094, CY8C24794, CY8C24894, and CY8C24994 Final Data Sheet
Designing with User Modules
User Module/Source Code Development Flows
The development process for the PSoC device differs from that
of a traditional fixed function microprocessor. The configurable
analog and digital hardware blocks give the PSoC architecture
a unique flexibility that pays dividends in managing specification
change during development and by lowering inventory costs.
These configurable resources, called PSoC Blocks, have the
ability to implement a wide variety of user-selectable functions.
Each block has several registers that determine its function and
connectivity to other blocks, multiplexers, buses and to the IO
pins. Iterative development cycles permit you to adapt the hardware as well as the software. This substantially lowers the risk
of having to select a different part to meet the final design
requirements.
Device Editor
User
Module
Selection
The API functions are documented in user module data sheets
that are viewed directly in the PSoC Designer IDE. These data
sheets explain the internal operation of the user module and
provide performance specifications. Each data sheet describes
the use of each user module parameter and documents the setting of each register controlled by the user module.
The development process starts when you open a new project
and bring up the Device Editor, a graphical user interface (GUI)
for configuring the hardware. You pick the user modules you
need for your project and map them onto the PSoC blocks with
point-and-click simplicity. Next, you build signal chains by interconnecting user modules to each other and the IO pins. At this
stage, you also configure the clock source connections and
enter parameter values directly or by selecting values from
drop-down menus. When you are ready to test the hardware
configuration or move on to developing code for the project, you
perform the “Generate Application” step. This causes PSoC
Designer to generate source code that automatically configures
the device to your specification and provides the high-level user
module API functions.
February 15, 2007
Placement
and
Parameter
-ization
Source
Code
Generator
Generate
Application
Application Editor
Project
Manager
To speed the development process, the PSoC Designer Integrated Development Environment (IDE) provides a library of
pre-built, pre-tested hardware peripheral functions, called “User
Modules.” User modules make selecting and implementing
peripheral devices simple, and come in analog, digital, and
mixed signal varieties. The standard User Module library contains over 50 common peripherals such as ADCs, DACs Timers, Counters, UARTs, and other not-so common peripherals
such as DTMF Generators and Bi-Quad analog filter sections.
Each user module establishes the basic register settings that
implement the selected function. It also provides parameters
that allow you to tailor its precise configuration to your particular
application. For example, a Pulse Width Modulator User Module configures one or more digital PSoC blocks, one for each 8
bits of resolution. The user module parameters permit you to
establish the pulse width and duty cycle. User modules also
provide tested software to cut your development time. The user
module application programming interface (API) provides highlevel functions to control and respond to hardware events at
run-time. The API also provides optional interrupt service routines that you can adapt as needed.
PSoC® Overview
Source
Code
Editor
Build
Manager
Build
All
Debugger
Interface
to ICE
Storage
Inspector
Event &
Breakpoint
Manager
The next step is to write your main program, and any sub-routines using PSoC Designer’s Application Editor subsystem.
The Application Editor includes a Project Manager that allows
you to open the project source code files (including all generated code files) from a hierarchal view. The source code editor
provides syntax coloring and advanced edit features for both C
and assembly language. File search capabilities include simple
string searches and recursive “grep-style” patterns. A single
mouse click invokes the Build Manager. It employs a professional-strength “makefile” system to automatically analyze all
file dependencies and run the compiler and assembler as necessary. Project-level options control optimization strategies
used by the compiler and linker. Syntax errors are displayed in
a console window. Double clicking the error message takes you
directly to the offending line of source code. When all is correct,
the linker builds a HEX file image suitable for programming.
The last step in the development process takes place inside the
PSoC Designer’s Debugger subsystem. The Debugger downloads the HEX image to the In-Circuit Emulator (ICE) where it
runs at full speed. Debugger capabilities rival those of systems
costing many times more. In addition to traditional single-step,
run-to-breakpoint and watch-variable features, the Debugger
provides a large trace buffer and allows you define complex
breakpoint events that include monitoring address and data bus
values, memory locations and external signals.
Document No. 38-12018 Rev. *J
7
[+] Feedback
CY8C24094, CY8C24794, CY8C24894, and CY8C24994 Final Data Sheet
PSoC® Overview
Document Conventions
Table of Contents
Acronyms Used
For an in depth discussion and more information on your PSoC
device, obtain the PSoC Mixed-Signal Array Technical Reference Manual. This document encompasses and is organized
into the following chapters and sections.
The following table lists the acronyms that are used in this document.
Acronym
Description
1.
AC
alternating current
ADC
analog-to-digital converter
API
application programming interface
CPU
central processing unit
CT
continuous time
DAC
digital-to-analog converter
DC
direct current
ECO
external crystal oscillator
EEPROM
electrically erasable programmable read-only memory
FSR
full scale range
GPIO
general purpose IO
GUI
graphical user interface
HBM
human body model
ICE
in-circuit emulator
ILO
internal low speed oscillator
IMO
internal main oscillator
IO
input/output
IPOR
imprecise power on reset
LSb
least-significant bit
LVD
low voltage detect
MSb
most-significant bit
PC
program counter
PLL
phase-locked loop
POR
power on reset
PPOR
precision power on reset
PSoC®
Programmable System-on-Chip™
PWM
pulse width modulator
SC
switched capacitor
SRAM
static random access memory
1.1
1.2
1.3
1.4
1.5
1.6
1.7
Register Reference ................................................................................ 19
2.1
Register Conventions ................................................................... 19
2.1.1
Abbreviations Used ....................................................... 19
2.2
Register Mapping Tables ............................................................. 19
3.
Electrical Specifications ....................................................................... 22
3.1
Absolute Maximum Ratings ......................................................... 23
3.2
Operating Temperature ................................................................ 23
3.3
DC Electrical Characteristics ........................................................ 23
3.3.1
DC Chip-Level Specifications ........................................ 23
3.3.2
DC General Purpose IO Specifications ......................... 24
3.3.3
DC Full-Speed USB Specifications ............................... 24
3.3.4
DC Operational Amplifier Specifications ....................... 25
3.3.5
DC Low Power Comparator Specifications ................... 26
3.3.6
DC Analog Output Buffer Specifications ....................... 27
3.3.7
DC Analog Reference Specifications ............................ 28
3.3.8
DC Analog PSoC Block Specifications .......................... 29
3.3.9
DC POR and LVD Specifications .................................. 29
3.3.10 DC Programming Specifications ................................... 30
3.4
AC Electrical Characteristics ........................................................ 31
3.4.1
AC Chip-Level Specifications ........................................ 31
3.4.2
AC General Purpose IO Specifications ......................... 32
3.4.3
AC Full-Speed USB Specifications ............................... 32
3.4.4
AC Operational Amplifier Specifications ........................ 33
3.4.5
AC Low Power Comparator Specifications ................... 35
3.4.6
AC Digital Block Specifications ..................................... 35
3.4.7
AC External Clock Specifications .................................. 35
3.4.8
AC Analog Output Buffer Specifications ........................ 36
3.4.9
AC Programming Specifications .................................... 37
3.4.10 AC I2C Specifications .................................................... 38
4.
Packaging Information .......................................................................... 39
4.1
Packaging Dimensions ................................................................. 39
4.2
Thermal Impedance ..................................................................... 42
4.3
Solder Reflow Peak Temperature ................................................ 42
5.
Development Tool Selection ................................................................ 43
5.1
Software ....................................................................................... 43
5.1.1
PSoC Designer .............................................................. 43
5.1.2
PSoC Express ............................................................... 43
5.1.3
PSoC Programmer ........................................................ 43
5.1.4
CY3202-C iMAGEcraft C Compiler ............................... 43
5.2
Development Kits ......................................................................... 43
5.2.1
CY3215-DK Basic Development Kit .............................. 43
5.2.2
CY3210-ExpressDK Development Kit ........................... 44
5.3
Evaluation Tools ........................................................................... 44
5.3.1
CY3210-MiniProg1 ........................................................ 44
5.3.2
CY3210-PSoCEval1 ...................................................... 44
5.3.3
CY3214-PSoCEvalUSB ................................................ 44
5.4
Device Programmers ................................................................... 44
5.4.1
CY3216 Modular Programmer ...................................... 44
5.4.2
CY3207ISSP In-System Serial Programmer (ISSP) ..... 44
5.5
Accessories (Emulation and Programming) ................................. 45
5.6
3rd-Party Tools ............................................................................. 45
5.7
Build a PSoC Emulator into Your Board ...................................... 45
6.
Ordering Information ............................................................................ 46
6.1
Ordering Code Definitions ............................................................ 46
7.
Sales and Company Information ......................................................... 47
7.1
Revision History ........................................................................... 47
7.2
Copyrights and Code Protection .................................................. 48
A units of measure table is located in the Electrical Specifications section. Table 3-1 on page 22 lists all the abbreviations
used to measure the PSoC devices.
Numeric Naming
Hexidecimal numbers are represented with all letters in uppercase with an appended lowercase ‘h’ (for example, ‘14h’ or
‘3Ah’). Hexidecimal numbers may also be represented by a ‘0x’
prefix, the C coding convention. Binary numbers have an
appended lowercase ‘b’ (e.g., 01010100b’ or ‘01000011b’).
Numbers not indicated by an ‘h’ or ‘b’ are decimal.
56-Pin Part Pinout ......................................................................... 9
56-Pin Part Pinout (with XRES) .................................................. 10
68-Pin Part Pinout ........................................................................ 11
68-Pin Part Pinout (On-Chip Debug) ........................................... 12
100-Ball VFBGA Part Pinout ........................................................ 13
100-Ball VFBGA Part Pinout (On-Chip Debug) ........................... 15
100-Pin Part Pinout (On-Chip Debug) .......................................... 17
2.
Units of Measure
February 15, 2007
Pin Information ........................................................................................ 9
Document No. 38-12018 Rev. *J
8
[+] Feedback
1. Pin Information
This chapter describes, lists, and illustrates the CY8C24x94 PSoC device family pins and pinout configuration.
The CY8C24x94 PSoC devices are available in the following packages, all of which are shown on the following pages. Every port pin
(labeled with a “P”) is capable of Digital IO. However, Vss, Vdd, and XRES are not capable of Digital IO.
1.1
56-Pin Part Pinout
Table 1-1. 56-Pin Part Pinout (QFN**) See LEGEND details and footnotes in Table 1-2 on page 10.
February 15, 2007
P2[5],M
P2[7],M
P0[1], A, I, M
P0[3], A, IO, M
P0[5], A, IO, M
P0[7], A, I, M
Vss
Vdd
P0[6], A, I, M
P0[4], A, I, M
P0[2], A, I, M
P0[0], A, I, M
P2[6],M
P2[4],M
Direct switched capacitor block input.
Direct switched capacitor block input.
I2C Serial Clock (SCL).
I2C Serial Data (SDA).
I2C Serial Clock (SCL), ISSP SCLK*.
Ground connection.
A, I, M, P2[3]
A, I, M, P2[1]
M,P4[7]
M,P4[5]
M,P4[3]
M,P4[1]
M,P3[7]
M,P3[5]
M,P3[3]
M,P3[1]
M,P5[7]
M,P5[5]
M,P5[3]
M,P5[1]
Supply voltage.
I2C Serial Data (SDA), ISSP SDATA*.
Type
Pin
No. Digital Analog
44
IO
M
45
IO
I, M
46
IO
I, M
47
IO
I, M
48
IO
I, M
49
Power
50
Power
51
IO
I, M
52
IO
IO, M
53
IO
IO, M
Direct switched capacitor block input.
54
IO
I, M
Direct switched capacitor block input.
55
IO
M
External Analog Ground (AGND) input. 56
IO
M
56
55
54
53
52
51
50
49
48
47
46
45
44
43
P2[3]
P2[1]
P4[7]
P4[5]
P4[3]
P4[1]
P3[7]
P3[5]
P3[3]
P3[1]
P5[7]
P5[5]
P5[3]
P5[1]
P1[7]
P1[5]
P1[3]
P1[1]
Vss
D+
DVdd
P7[7]
P7[0]
P1[0]
P1[2]
P1[4]
P1[6]
P5[0]
P5[2]
P5[4]
P5[6]
P3[0]
P3[2]
P3[4]
P3[6]
P4[0]
P4[2]
P4[4]
P4[6]
P2[0]
P2[2]
P2[4]
CY8C24794 56-Pin PSoC Device
Description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
QFN
(Top View )
15
16
17
18
19
20
21
22
23
24
25
26
27
28
Name
42
41
40
39
38
37
36
35
34
33
32
31
30
29
P2[2], A, I, M
P2[0], A, I, M
P4[6],M
P4[4],M
P4[2],M
P4[0],M
P3[6],M
P3[4],M
P3[2],M
P3[0],M
P5[6],M
P5[4],M
P5[2],M
P5[0],M
M, I2C SCL, P1[7]
M, I2C SDA, P1[5]
M,P1[3]
M, I2C SCL, P1[1]
Vss
D+
DVdd
P7[7]
P7[0]
M, I2C SDA, P1[0]
M,P1[2]
M,P1[4]
M,P1[6]
Type
Pin
No. Digital Analog
1
IO
I, M
2
IO
I, M
3
IO
M
4
IO
M
5
IO
M
6
IO
M
7
IO
M
8
IO
M
9
IO
M
10
IO
M
11
IO
M
12
IO
M
13
IO
M
14
IO
M
15
IO
M
16
IO
M
17
IO
M
18
IO
M
19
Power
20
USB
21
USB
22
Power
23
IO
24
IO
25
IO
M
26
IO
M
27
IO
M
28
IO
M
29
IO
M
30
IO
M
31
IO
M
32
IO
M
33
IO
M
34
IO
M
35
IO
M
36
IO
M
37
IO
M
38
IO
M
39
IO
M
40
IO
M
41
IO
I, M
42
IO
I, M
43
IO
M
Name
P2[6]
P0[0]
P0[2]
P0[4]
P0[6]
Vdd
Vss
P0[7]
P0[5]
P0[3]
P0[1]
P2[7]
P2[5]
Document No. 38-12018 Rev. *J
Description
External Voltage Reference (VREF) input.
Analog column mux input.
Analog column mux input.
Analog column mux input VREF.
Analog column mux input.
Supply voltage.
Ground connection.
Analog column mux input,.
Analog column mux input and column output.
Analog column mux input and column output.
Analog column mux input.
9
[+] Feedback
CY8C24094, CY8C24794, CY8C24894, and CY8C24994 Final Data Sheet
1.2
1. Pin Information
56-Pin Part Pinout (with XRES)
Table 1-2. 56-Pin Part Pinout (QFN**)
P2[6], M
P2[4], M
44
43
M
M
A, I, M
A, IO, M
P2[5],
P2[7],
P0[1],
P0[3],
15
16
17
18
19
20
21
22
23
24
M, P1[3]
M, I2C SCL, P1[1]
Vss
D+
I2C Serial Data (SDA), ISSP SDATA*.
M, I2C SCL, P1[7]
M, I2C SDA, P1[5]
Supply voltage.
Name
25
26
27
28
P4[0]
P4[2]
P4[4]
P4[6]
P2[0]
P2[2]
P2[4]
11
12
13
14
P5[7]
P5[5]
P5[3]
P5[1]
QFN
(Top View)
42
41
40
39
38
37
36
35
34
33
P2[2], A, I, M
P2[0], A, I, M
32
31
30
29
P5[6],
P5[4],
P5[2],
P5[0],
P4[6],
P4[4],
P4[2],
P4[0],
XRES
M
M
M
M
P3[4], M
P3[2], M
P3[0], M
M
M
M
M
M, I2C SDA,
M,
M,
M,
M
M
M
M
I, M
I, M
M
M,
M,
M,
M,
M
M
M
M
IO
IO
IO
IO
IO
IO
IO
Input
M, P3[5]
M, P3[3]
M, P3[1]
3
4
5
6
7
8
9
10
P4[7]
P4[5]
P4[3]
P4[1]
P3[7]
I,
I,
I,
I,
37
38
39
40
41
42
43
Type
Pin
No. Digital Analog
44
IO
M
45
IO
I, M
46
IO
I, M
47
IO
I, M
48
IO
I, M
Active high external reset with internal 49
Power
pull down.
50
Power
51
IO
I, M
52
IO
IO, M
53
IO
IO, M
Direct switched capacitor block input.
54
IO
I, M
Direct switched capacitor block input.
55
IO
M
External Analog Ground (AGND) input. 56
IO
M
M,
M,
M,
M,
M,
A,
A,
A,
A,
P5[0]
P5[2]
P5[4]
P5[6]
P3[0]
P3[2]
P3[4]
XRES
P0[6],
P0[4],
P0[2],
P0[0],
M
M
M
M
M
M
M
48
47
46
45
IO
IO
IO
IO
IO
IO
IO
I2C Serial Clock (SCL), ISSP SCLK*.
Ground connection.
1
2
P7[0]
P1[0]
P1[2]
P1[4]
P1[6]
29
30
31
32
33
34
35
36
I2C Serial Clock (SCL).
I2C Serial Data (SDA).
A, I, M, P2[3]
A, I, M, P2[1]
DVdd
P7[7]
Direct switched capacitor block input.
Direct switched capacitor block input.
Description
P0[5], A, IO, M
P0[7], A, I, M
Vss
Vdd
P2[3]
P2[1]
P4[7]
P4[5]
P4[3]
P4[1]
P3[7]
P3[5]
P3[3]
P3[1]
P5[7]
P5[5]
P5[3]
P5[1]
P1[7]
P1[5]
P1[3]
P1[1]
Vss
D+
DVdd
P7[7]
P7[0]
P1[0]
P1[2]
P1[4]
P1[6]
Name
56
55
54
53
52
51
50
49
CY8C24894 56-Pin PSoC Device
Type
Pin
No. Digital Analog
1
IO
I, M
2
IO
I, M
3
IO
M
4
IO
M
5
IO
M
6
IO
M
7
IO
M
8
IO
M
9
IO
M
10
IO
M
11
IO
M
12
IO
M
13
IO
M
14
IO
M
15
IO
M
16
IO
M
17
IO
M
18
IO
M
19
Power
20
USB
21
USB
22
Power
23
IO
24
IO
25
IO
M
26
IO
M
27
IO
M
28
IO
M
Description
P2[6]
P0[0]
P0[2]
P0[4]
P0[6]
Vdd
External Voltage Reference (VREF) input.
Analog column mux input.
Analog column mux input.
Analog column mux input VREF.
Analog column mux input.
Supply voltage.
Vss
P0[7]
P0[5]
P0[3]
P0[1]
P2[7]
P2[5]
Ground connection.
Analog column mux input,.
Analog column mux input and column output.
Analog column mux input and column output.
Analog column mux input.
LEGEND A = Analog, I = Input, O = Output, and M = Analog Mux Input.
* These are the ISSP pins, which are not High Z at POR. See the PSoC Mixed-Signal Array Technical Reference Manual for details.
** The center pad on the QFN package should be connected to ground (Vss) for best mechanical, thermal, and electrical performance. If not connected to
ground, it should be electrically floated and not connected to any other signal.
February 15, 2007
Document No. 38-12018 Rev. *J
10
[+] Feedback
CY8C24094, CY8C24794, CY8C24894, and CY8C24994 Final Data Sheet
1.3
1. Pin Information
68-Pin Part Pinout
The 68-pin QFN part table and drawing below is for the CY8C24994 PSoC device.
Table 1-3. 68-Pin Part Pinout (QFN**)
44
45
46
47
48
49
M
M
M
M
M
M
M
M
M
NC
NC
XRES
Input
IO
IO
IO
M
M
M
P4[0]
P4[2]
P4[4]
M,
M,
I2C SCL, M,
I2C SDA, M,
I2C Serial Clock (SCL) ISSP SCLK*.
Ground connection.
P5[3]
P5[1]
P1[7]
P1[5]
Supply voltage.
Type
Pin
No. Digital Analog
50
IO
M
I2C Serial Data (SDA), ISSP SDATA*. 51
IO
I,M
52
IO
I,M
Optional External Clock Input (EXT53
IO
M
CLK).
54
IO
M
55
IO
I,M
56
IO
I,M
57
IO
I,M
58
IO
I,M
59
Power
60
Power
61
IO
I,M
62
IO
IO,M
No connection.
No connection.
Active high pin reset with internal pull
down.
AI
AI
AI
AI
Ext. VREF
Ext. AGND
AI
55
54
53
52
M,
M,
M,
M,
M,
M,
M,
M, AI
P0[7],
Vss
Vdd
P0[6],
P0[4],
P0[2],
P0[0],
P2[6],
P2[4],
P2[2],
AI
AIO
AIO
51
50
49
48
47
46
45
44
43
42
41
40
39
38
37
36
35
QFN
(Top View)
28
29
30
31
32
33
34
I2C Serial Clock (SCL).
I2C Serial Data (SDA).
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
P7[3]
P7[2]
P7[1]
P7[0]
I2C SDA, M, P1[0]
M, P1[2]
M, P1[4]
M, P4[1]
NC
NC
Vss
M, P3[7]
M, P3[5]
M, P3[3]
M, P3[1]
M, P5[7]
M, P5[5]
M,
M,
M
M
M,
M,
M,
AI
AI
M, P4[7]
M, P4[5]
M, P4[3]
P2[1],
P2[3],
P2[5],
P2[7],
P0[1],
P0[3],
P0[5],
P1[6]
P5[0]
P5[2]
P5[4]
P5[6]
P3[0]
P3[2]
P3[4]
P3[6]
IO
IO
IO
IO
IO
IO
IO
IO
IO
No connection.
No connection.
Ground connection.
68
67
66
65
64
63
62
61
60
59
58
57
56
35
36
37
38
39
40
41
42
43
CY8C24994 68-Pin PSoC Device
Description
18
19
20
21
22
23
24
25
26
27
P4[7]
P4[5]
P4[3]
P4[1]
NC
NC
Vss
P3[7]
P3[5]
P3[3]
P3[1]
P5[7]
P5[5]
P5[3]
P5[1]
P1[7]
P1[5]
P1[3]
P1[1]
Vss
D+
DVdd
P7[7]
P7[6]
P7[5]
P7[4]
P7[3]
P7[2]
P7[1]
P7[0]
P1[0]
P1[2]
P1[4]
Name
M, P1[3]
I2C SCL, M, P1[1]
Vss
D+
DVdd
P7[7]
P7[6]
P7[5]
P7[4]
Type
Pin
No. Digital Analog
1
IO
M
2
IO
M
3
IO
M
4
IO
M
5
6
7
Power
8
IO
M
9
IO
M
10
IO
M
11
IO
M
12
IO
M
13
IO
M
14
IO
M
15
IO
M
16
IO
M
17
IO
M
18
IO
M
19
IO
M
20
Power
21
USB
22
USB
23
Power
24
IO
25
IO
26
IO
27
IO
28
IO
29
IO
30
IO
31
IO
32
IO
M
33
IO
M
34
IO
M
Name
P4[6]
P2[0]
P2[2]
P2[4]
P2[6]
P0[0]
P0[2]
P0[4]
P0[6]
Vdd
Vss
P0[7]
P0[5]
63
64
65
IO
IO
IO
IO,M
I,M
M
P0[3]
P0[1]
P2[7]
66
67
68
IO
IO
IO
M
I,M
I,M
P2[5]
P2[3]
P2[1]
P2[0],
P4[6],
P4[4],
P4[2],
P4[0],
XRES
NC
NC
P3[6],
P3[4],
P3[2],
P3[0],
M, AI
M
M
M
M
M
M
M
M
P5[6], M
P5[4], M
P5[2], M
P5[0], M
P1[6], M
Description
Direct switched capacitor block input.
Direct switched capacitor block input.
External Analog Ground (AGND) input.
External Voltage Reference (VREF) input.
Analog column mux input.
Analog column mux input and column output.
Analog column mux input and column output.
Analog column mux input.
Supply voltage.
Ground connection.
Analog column mux input, integration input #1
Analog column mux input and column output, integration input #2.
Analog column mux input and column output.
Analog column mux input.
Direct switched capacitor block input.
Direct switched capacitor block input.
LEGENDA = Analog, I = Input, O = Output, NC = No Connection, M = Analog Mux Input.
* These are the ISSP pins, which are not High Z at POR. See the PSoC Mixed-Signal Array Technical Reference Manual for details.
** The center pad on the QFN package should be connected to ground (Vss) for best mechanical, thermal, and electrical performance. If not connected to
ground, it should be electrically floated and not connected to any other signal.
February 15, 2007
Document No. 38-12018 Rev. *J
11
[+] Feedback
CY8C24094, CY8C24794, CY8C24894, and CY8C24994 Final Data Sheet
1.4
1. Pin Information
68-Pin Part Pinout (On-Chip Debug)
The 68-pin QFN part table and drawing below is for the CY8C24094 On-Chip Debug (OCD) PSoC device.
Note This part is only used for in-circuit debugging. It is NOT available for production.
Table 1-4. 68-Pin Part Pinout (QFN**)
44
45
46
47
48
49
M
M
M
M
M
M
M
M
M
HCLK
CCLK
XRES
Input
IO
IO
IO
M
M
M
P4[0]
P4[2]
P4[4]
Type
Pin
No. Digital Analog
50
IO
M
I2C Serial Data (SDA), ISSP SDATA*. 51
IO
I,M
52
IO
I,M
Optional External Clock Input (EXT53
IO
M
CLK).
54
IO
M
55
IO
I,M
56
IO
I,M
57
IO
I,M
58
IO
I,M
59
Power
60
Power
61
IO
I,M
62
IO
IO,M
OCD high-speed clock output.
OCD CPU clock output.
Active high pin reset with internal pull
down.
Name
P4[6]
P2[0]
P2[2]
P2[4]
P2[6]
P0[0]
P0[2]
P0[4]
P0[6]
Vdd
Vss
P0[7]
P0[5]
63
64
65
IO
IO
IO
IO,M
I,M
M
P0[3]
P0[1]
P2[7]
66
67
68
IO
IO
IO
M
I,M
I,M
P2[5]
P2[3]
P2[1]
P2[6], M, Ext. VREF
P2[4], M, Ext. AGND
P2[2], M, AI
55
54
53
52
58
57
56
51
50
49
48
47
46
45
44
43
42
41
40
39
38
37
36
35
P2[0], M, AI
P4[6], M
P4[4], M
P4[2], M
P4[0], M
XRES
CCLK
HCLK
P3[6], M
P3[4], M
P3[2], M
P3[0], M
P5[6], M
P5[4], M
P5[2], M
P5[0], M
P1[6], M
I2C SDA, M, P1[0]
M, P1[2]
M, P1[4]
28
29
30
31
32
33
34
P7[3]
P7[2]
P7[1]
P7[0]
P7[7]
P7[6]
P7[5]
P7[4]
Supply voltage.
P0[7], M, AI
Vss
Vdd
P0[6], M, AI
P0[4], M, AI
P0[2], M, AI
P0[0], M, AI
64
63
62
61
60
59
P2[3], M, AI
P2[5], M
P2[7], M
P0[1], M, AI
P0[3], M, AIO
P0[5], M, AIO
QFN
(Top View)
23
24
25
26
27
I2C Serial Clock (SCL), ISSP SCLK*.
Ground connection.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
20
21
22
I2C Serial Clock (SCL).
I2C Serial Data (SDA).
M, P4[7]
M, P4[5]
M, P4[3]
M, P4[1]
OCDE
OCDO
Vss
M, P3[7]
M, P3[5]
M, P3[3]
M, P3[1]
M, P5[7]
M, P5[5]
M, P5[3]
M, P5[1]
I2C SCL, M, P1[7]
I2C SDA, M, P1[5]
66
65
P2[1], M, AI
P1[6]
P5[0]
P5[2]
P5[4]
P5[6]
P3[0]
P3[2]
P3[4]
P3[6]
IO
IO
IO
IO
IO
IO
IO
IO
IO
OCD even data IO.
OCD odd data output.
Ground connection.
68
67
35
36
37
38
39
40
41
42
43
CY8C24094 68-Pin OCD PSoC Device
Description
18
19
P4[7]
P4[5]
P4[3]
P4[1]
OCDE
OCDO
Vss
P3[7]
P3[5]
P3[3]
P3[1]
P5[7]
P5[5]
P5[3]
P5[1]
P1[7]
P1[5]
P1[3]
P1[1]
Vss
D+
DVdd
P7[7]
P7[6]
P7[5]
P7[4]
P7[3]
P7[2]
P7[1]
P7[0]
P1[0]
P1[2]
P1[4]
Name
M, P1[3]
I2C SCL, M, P1[1]
Vss
D+
DVdd
Type
Pin
No. Digital Analog
1
IO
M
2
IO
M
3
IO
M
4
IO
M
5
6
7
Power
8
IO
M
9
IO
M
10
IO
M
11
IO
M
12
IO
M
13
IO
M
14
IO
M
15
IO
M
16
IO
M
17
IO
M
18
IO
M
19
IO
M
20
Power
21
USB
22
USB
23
Power
24
IO
25
IO
26
IO
27
IO
28
IO
29
IO
30
IO
31
IO
32
IO
M
33
IO
M
34
IO
M
Description
Direct switched capacitor block input.
Direct switched capacitor block input.
External Analog Ground (AGND) input.
External Voltage Reference (VREF) input.
Analog column mux input.
Analog column mux input and column output.
Analog column mux input and column output.
Analog column mux input.
Supply voltage.
Ground connection.
Analog column mux input, integration input #1
Analog column mux input and column output, integration input #2.
Analog column mux input and column output.
Analog column mux input.
Direct switched capacitor block input.
Direct switched capacitor block input.
LEGENDA = Analog, I = Input, O = Output, M = Analog Mux Input, OCD = On-Chip Debugger.
* These are the ISSP pins, which are not High Z at POR. See the PSoC Mixed-Signal Array Technical Reference Manual for details.
** The center pad on the QFN package should be connected to ground (Vss) for best mechanical, thermal, and electrical performance. If not connected to
ground, it should be electrically floated and not connected to any other signal.
February 15, 2007
Document No. 38-12018 Rev. *J
12
[+] Feedback
CY8C24094, CY8C24794, CY8C24894, and CY8C24994 Final Data Sheet
1.5
1. Pin Information
100-Ball VFBGA Part Pinout
The 100-ball VFBGA part is for the CY8C24994 PSoC device.
A1
A2
A3
A4
A5
A6
A7
A8
A9
A10
B1
B2
B3
B4
B5
B6
B7
B8
B9
B10
C1
C2
C3
C4
C5
C6
C7
C8
C9
C10
D1
D2
D3
D4
D5
D6
D7
D8
D9
D10
E1
E2
E3
E4
E5
E6
E7
E8
E9
E10
Power
Power
Vss
Vss
NC
NC
NC
Power
Vdd
NC
NC
Power
Vss
Power
Vss
Power
Vss
Power
Vss
IO
I,M P2[1]
IO
I,M P0[1]
IO
I,M P0[7]
Power
Vdd
IO
I,M P0[2]
IO
I,M P2[2]
Power
Vss
Power
Vss
NC
IO
M P4[1]
IO
M P4[7]
IO
M P2[7]
IO IO,M P0[5]
IO
I,M P0[6]
IO
I,M P0[0]
IO
I,M P2[0]
IO
M P4[2]
NC
NC
IO
M P3[7]
IO
M P4[5]
IO
M P2[5]
IO IO,M P0[3]
IO
I,M P0[4]
IO
M P2[6]
IO
M P4[6]
IO
M P4[0]
NC
NC
NC
IO
M P4[3]
IO
I,M P2[3]
Power
Vss
Power
Vss
IO
M P2[4]
IO
M P4[4]
IO
M P3[6]
NC
Pin
No.
Description
Ground connection.
Ground connection.
No connection.
No connection.
No connection.
Supply voltage.
No connection.
No connection.
Ground connection.
Ground connection.
Ground connection.
Ground connection.
Direct switched capacitor block input.
Analog column mux input.
Analog column mux input.
Supply voltage.
Analog column mux input.
Direct switched capacitor block input.
Ground connection.
Ground connection.
No connection.
F1
F2
F3
F4
F5
F6
F7
F8
F9
F10
G1
G2
G3
G4
G5
G6
G7
G8
G9
G10
H1
H2
H3
H4
Analog column mux input and column output. H5
Analog column mux input.
H6
Analog column mux input.
H7
Direct switched capacitor block input.
H8
H9
No connection.
H10
No connection.
J1
J2
J3
J4
Analog column mux input and column output. J5
Analog column mux input.
J6
External Voltage Reference (VREF) input.
J7
J8
J9
No connection.
J10
No connection.
K1
No connection.
K2
K3
Direct switched capacitor block input.
K4
Ground connection.
K5
Ground connection.
K6
External Analog Ground (AGND) input.
K7
K8
K9
No connection.
K10
Analog
Name
Digital
Analog
Pin
No.
Digital
Table 1-5. 100-Ball Part Pinout (VFBGA)
IO
M
IO
M
IO
M
Power
Power
IO
M
IO
M
IO
IO
IO
IO
IO
IO
IO
IO
IO
IO
M
M
M
M
M
M
M
M
IO
M
IO
M
IO
M
IO
M
IO
M
IO
M
IO
M
IO
M
IO
Power
Power
USB
USB
Power
IO
IO
IO
M
Power
Power
Power
Power
Power
IO
IO
IO
Power
Power
Name
NC
P5[7]
P3[5]
P5[1]
Vss
Vss
P5[0]
P3[0]
XRES
P7[1]
NC
P5[5]
P3[3]
P1[7]
P1[1]
P1[0]
P1[6]
P3[4]
P5[6]
P7[2]
NC
P5[3]
P3[1]
P1[5]
P1[3]
P1[2]
P1[4]
P3[2]
P5[4]
P7[3]
Vss
Vss
D+
DVdd
P7[7]
P7[0]
P5[2]
Vss
Vss
Vss
Vss
NC
NC
Vdd
P7[6]
P7[5]
P7[4]
Vss
Vss
Description
No connection.
Ground connection.
Ground connection.
Active high pin reset with internal pull down.
No connection.
I2C Serial Clock (SCL).
I2C Serial Clock (SCL), ISSP SCLK*.
I2C Serial Data (SDA), ISSP SDATA*.
No connection.
I2C Serial Data (SDA).
Ground connection.
Ground connection.
Supply voltage.
Ground connection.
Ground connection.
Ground connection.
Ground connection.
No connection.
No connection.
Supply voltage.
Ground connection.
Ground connection.
LEGEND A = Analog, I = Input, O = Output, M = Analog Mux Input, NC = No Connection.
* This is the ISSP pin, which is not High Z at POR. See the PSoC Mixed-Signal Array Technical Reference Manual for details.
February 15, 2007
Document No. 38-12018 Rev. *J
13
[+] Feedback
CY8C24094, CY8C24794, CY8C24894, and CY8C24994 Final Data Sheet
1. Pin Information
CY8C24994
1
2
3
4
5
6
7
8
9
10
A
Vss
Vss
NC
NC
NC
Vdd
NC
NC
Vss
Vss
B
Vss
Vss
P2[1]
P0[1]
P0[7]
Vdd
P0[2]
P2[2]
Vss
Vss
C
NC
P4[1]
P4[7]
P2[7]
P0[5]
P0[6]
P0[0]
P2[0]
P4[2]
NC
D
NC
P3[7]
P4[5]
P2[5]
P0[3]
P0[4]
P2[6]
P4[6]
P4[0]
NC
E
NC
NC
P4[3]
P2[3]
Vss
Vss
P2[4]
P4[4]
P3[6]
NC
F
NC
P5[7]
P3[5]
P5[1]
Vss
Vss
P5[0]
P3[0]
XRES
P7[1]
G
NC
P5[5]
P3[3]
P1[7]
P1[1]
P1[0]
P1[6]
P3[4]
P5[6]
P7[2]
H
NC
P5[3]
P3[1]
P1[5]
P1[3]
P1[2]
P1[4]
P3[2]
P5[4]
P7[3]
J
Vss
Vss
D+
D-
Vdd
P7[7]
P7[0]
P5[2]
Vss
Vss
K
Vss
Vss
NC
NC
Vdd
P7[6]
P7[5]
P7[4]
Vss
Vss
BGA (Top View)
February 15, 2007
Document No. 38-12018 Rev. *J
14
[+] Feedback
CY8C24094, CY8C24794, CY8C24894, and CY8C24994 Final Data Sheet
1.6
1. Pin Information
100-Ball VFBGA Part Pinout (On-Chip Debug)
The 100-pin VFBGA part table and drawing below is for the CY8C24094 On-Chip Debug (OCD) PSoC device.
Note This part is only used for in-circuit debugging. It is NOT available for production.
A1
A2
A3
A4
A5
A6
A7
A8
A9
A10
B1
B2
B3
B4
B5
B6
B7
B8
B9
B10
C1
C2
C3
C4
C5
C6
C7
C8
C9
C10
D1
D2
D3
D4
D5
D6
D7
D8
D9
D10
E1
E2
E3
E4
E5
E6
E7
E8
E9
E10
Power
Power
Vss
Vss
NC
NC
NC
Power
Vdd
NC
NC
Power
Vss
Power
Vss
Power
Vss
Power
Vss
IO
I,M P2[1]
IO
I,M P0[1]
IO
I,M P0[7]
Power
Vdd
IO
I,M P0[2]
IO
I,M P2[2]
Power
Vss
Power
Vss
NC
IO
M P4[1]
IO
M P4[7]
IO
M P2[7]
IO IO,M P0[5]
IO
I,M P0[6]
IO
I,M P0[0]
IO
I,M P2[0]
IO
M P4[2]
NC
NC
IO
M P3[7]
IO
M P4[5]
IO
M P2[5]
IO IO,M P0[3]
IO
I,M P0[4]
IO
M P2[6]
IO
M P4[6]
IO
M P4[0]
CCLK
NC
NC
IO
M P4[3]
IO
I,M P2[3]
Power
Vss
Power
Vss
IO
M P2[4]
IO
M P4[4]
IO
M P3[6]
HCLK
Pin
No.
Description
Ground connection.
Ground connection.
No connection.
No connection.
No connection.
Supply voltage.
No connection.
No connection.
Ground connection.
Ground connection.
Ground connection.
Ground connection.
Direct switched capacitor block input.
Analog column mux input.
Analog column mux input.
Supply voltage.
Analog column mux input.
Direct switched capacitor block input.
Ground connection.
Ground connection.
No connection.
F1
F2
F3
F4
F5
F6
F7
F8
F9
F10
G1
G2
G3
G4
G5
G6
G7
G8
G9
G10
H1
H2
H3
H4
Analog column mux input and column output. H5
Analog column mux input.
H6
Analog column mux input.
H7
Direct switched capacitor block input.
H8
H9
No connection.
H10
No connection.
J1
J2
J3
J4
Analog column mux input and column output. J5
Analog column mux input.
J6
External Voltage Reference (VREF) input.
J7
J8
J9
OCD CPU clock output.
J10
No connection.
K1
No connection.
K2
K3
Direct switched capacitor block input.
K4
Ground connection.
K5
Ground connection.
K6
External Analog Ground (AGND) input.
K7
K8
K9
OCD high-speed clock output.
K10
Analog
Name
Digital
Analog
Pin
No.
Digital
Table 1-6. 100-Ball Part Pinout (VFBGA)
IO
M
IO
M
IO
M
Power
Power
IO
M
IO
M
IO
IO
IO
IO
IO
IO
IO
IO
IO
IO
M
M
M
M
M
M
M
M
IO
M
IO
M
IO
M
IO
M
IO
M
IO
M
IO
M
IO
M
IO
Power
Power
USB
USB
Power
IO
IO
IO
M
Power
Power
Power
Power
Power
IO
IO
IO
Power
Power
Name
OCDE
P5[7]
P3[5]
P5[1]
Vss
Vss
P5[0]
P3[0]
XRES
P7[1]
OCDO
P5[5]
P3[3]
P1[7]
P1[1]
P1[0]
P1[6]
P3[4]
P5[6]
P7[2]
NC
P5[3]
P3[1]
P1[5]
P1[3]
P1[2]
P1[4]
P3[2]
P5[4]
P7[3]
Vss
Vss
D+
DVdd
P7[7]
P7[0]
P5[2]
Vss
Vss
Vss
Vss
NC
NC
Vdd
P7[6]
P7[5]
P7[4]
Vss
Vss
Description
OCD even data IO.
Ground connection.
Ground connection.
Active high pin reset with internal pull down.
OCD odd data output.
I2C Serial Clock (SCL).
I2C Serial Clock (SCL), ISSP SCLK*.
I2C Serial Data (SDA), ISSP SDATA*.
No connection.
I2C Serial Data (SDA).
Ground connection.
Ground connection.
Supply voltage.
Ground connection.
Ground connection.
Ground connection.
Ground connection.
No connection.
No connection.
Supply voltage.
Ground connection.
Ground connection.
LEGEND A = Analog, I = Input, O = Output, M = Analog Mux Input, NC = No Connection, OCD = On-Chip Debugger.
* This is the ISSP pin, which is not High Z at POR. See the PSoC Mixed-Signal Array Technical Reference Manual for details.
February 15, 2007
Document No. 38-12018 Rev. *J
15
[+] Feedback
CY8C24094, CY8C24794, CY8C24894, and CY8C24994 Final Data Sheet
1. Pin Information
CY8C24094 OCD
1
2
3
4
5
6
7
8
9
10
A
Vss
Vss
NC
NC
NC
Vdd
NC
NC
Vss
Vss
B
Vss
Vss
P2[1]
P0[1]
P0[7]
Vdd
P0[2]
P2[2]
Vss
Vss
C
NC
P4[1]
P4[7]
P2[7]
P0[5]
P0[6]
P0[0]
P2[0]
P4[2]
NC
D
NC
P3[7]
P4[5]
P2[5]
P0[3]
P0[4]
P2[6]
P4[6]
P4[0]
CClk
E
NC
NC
P4[3]
P2[3]
Vss
Vss
P2[4]
P4[4]
P3[6]
HClk
F
ocde
P5[7]
P3[5]
P5[1]
Vss
Vss
P5[0]
P3[0]
XRES
P7[1]
G
ocdo
P5[5]
P3[3]
P1[7]
P1[1]
P1[0]
P1[6]
P3[4]
P5[6]
P7[2]
H
NC
P5[3]
P3[1]
P1[5]
P1[3]
P1[2]
P1[4]
P3[2]
P5[4]
P7[3]
J
Vss
Vss
D+
D-
Vdd
P7[7]
P7[0]
P5[2]
Vss
Vss
K
Vss
Vss
NC
NC
Vdd
P7[6]
P7[5]
P7[4]
Vss
Vss
BGA (Top View)
Not for Production
February 15, 2007
Document No. 38-12018 Rev. *J
16
[+] Feedback
CY8C24094, CY8C24794, CY8C24894, and CY8C24994 Final Data Sheet
1.7
1. Pin Information
100-Pin Part Pinout (On-Chip Debug)
The 100-pin TQFP part is for the CY8C24094 On-Chip Debug (OCD) PSoC device.
Note This part is only used for in-circuit debugging. It is NOT available for production.
NC
NC
IO I, M P0[1]
IO
M P2[7]
IO
M P2[5]
IO I, M P2[3]
IO I, M P2[1]
IO
M P4[7]
IO
M P4[5]
IO
M P4[3]
IO
M P4[1]
OCDE
OCDO
NC
Power Vss
IO
M P3[7]
IO
M P3[5]
IO
M P3[3]
IO
M P3[1]
IO
M P5[7]
IO
M P5[5]
IO
M P5[3]
IO
M P5[1]
IO
M P1[7]
NC
NC
NC
IO
P1[5]
IO
P1[3]
IO
P1[1]
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
IO
NC
Vss
D+
DVdd
P7[7]
P7[6]
P7[5]
P7[4]
P7[3]
P7[2]
P7[1]
P7[0]
NC
NC
NC
NC
P1[0]
IO
IO
P1[2]
P1[4]
Power
USB
USB
Power
IO
IO
IO
IO
IO
IO
IO
IO
Description
No connection.
No connection.
Analog column mux input.
Direct switched capacitor block input.
Direct switched capacitor block input.
OCD even data IO.
OCD odd data output.
No connection.
Ground connection.
I2C Serial Clock (SCL).
No connection.
No connection.
No connection.
I2C Serial Data (SDA)
Crystal (XTALin), I2C Serial Clock (SCL),
ISSP SCLK*.
No connection.
Ground connection.
Supply voltage.
No connection.
No connection.
No connection.
No connection.
Crystal (XTALout), I2C Serial Data (SDA),
ISSP SDATA*.
Optional External Clock Input (EXTCLK).
Pin
No.
Analog
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
Name
Digital
Pin
No.
Digital
Analog
Table 1-7. 100-Pin Part Pinout (TQFP)
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
IO
IO
IO
IO
IO
IO
IO
IO
IO
M
M
M
M
M
M
M
M
M
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
IO I, M P0[6]
Power
Vdd
NC
Power
Vss
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
IO I, M P0[7]
NC
IO IO, M P0[5]
NC
Analog column mux input.
Supply voltage.
No connection.
Ground connection.
No connection.
No connection.
No connection.
No connection.
No connection.
No connection.
No connection.
No connection.
No connection.
No connection.
Analog column mux input.
No connection.
Analog column mux input and column output.
No connection.
99
100
IO
Analog column mux input and column output.
No connection.
Input
IO
M
IO
M
Power
IO
M
IO
M
IO I, M
IO I, M
IO
IO
IO
I
IO
I, M
IO
I, M
Name
P1[6]
P5[0]
P5[2]
P5[4]
P5[6]
P3[0]
P3[2]
P3[4]
P3[6]
HCLK
CCLK
XRES
P4[0]
P4[2]
Vss
P4[4]
P4[6]
P2[0]
P2[2]
P2[4]
NC
P2[6]
NC
P0[0]
NC
NC
P0[2]
NC
P0[4]
NC
IO, M P0[3]
NC
Description
OCD high-speed clock output.
OCD CPU clock output.
Active high pin reset with internal pull down.
Ground connection.
Direct switched capacitor block input.
Direct switched capacitor block input.
External Analog Ground (AGND) input.
No connection.
External Voltage Reference (VREF) input.
No connection.
Analog column mux input.
No connection.
No connection.
Analog column mux input and column output.
No connection.
Analog column mux input and column output.
No connection.
LEGEND A = Analog, I = Input, O = Output, NC = No Connection, M = Analog Mux Input, OCD = On-Chip Debugger.
* These are the ISSP pins, which are not High Z at POR. See the PSoC Mixed-Signal Array Technical Reference Manual for details.
February 15, 2007
Document No. 38-12018 Rev. *J
17
[+] Feedback
CY8C24094, CY8C24794, CY8C24894, and CY8C24994 Final Data Sheet
1. Pin Information
NC
P0[2], M, AI
NC
NC
P0[0], M , AI
NC
P2[6], M , External VREF
NC
P2[4], M , External AGND
P2[2], M , AI
P2[0], M , AI
P4[6], M
P4[4], M
Vss
P4[2], M
P4[0], M
XRES
CCLK
HCLK
P3[6], M
P3[4], M
P3[2], M
P3[0], M
P5[6], M
P5[4], M
P5[2], M
P5[0], M
P1[6], M
M,P1[2]
M,P1[4]
46
47
48
49
50
P7[1]
P7[0]
NC
NC
NC
NC
I2C SDA, M, P1[0]
P7[3]
P7[2]
36
37
38
39
40
41
42
43
44
45
P7[7]
P7[6]
P7[5]
P7[4]
31
32
33
34
35
77
76
80
79
78
NC
Vdd
P0[6], M, AI
NC
P0[4], M, AI
NC
NC
Vss
87
86
85
84
83
82
81
90
89
88
NC
NC
NC
NC
NC
NC
NC
NC
P0[7], M, AI
NC
95
94
93
92
91
P0[3], M, AI
NC
P0[5], M, AI
98
97
96
28
29
30
26
27
23
24
25
75
74
73
72
71
70
69
68
67
66
65
64
63
62
61
60
59
58
57
56
55
54
53
52
51
TQFP
NC
M , P3[3]
M , P3[1]
M , P5[7]
M , P5[5]
M , P5[3]
M , P5[1]
I2C SCL, P1[7]
NC
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
NC
I2C SDA, M, P1[5]
M,P1[3]
I2C SCL, M, P1[1]
NC
Vss
D+
DVdd
NC
NC
AI, M , P0[1]
M , P2[7]
M , P2[5]
AI, M , P2[3]
AI, M , P2[1]
M , P4[7]
M , P4[5]
M , P4[3]
M , P4[1]
OCDE
OCDO
NC
Vss
M , P3[7]
M , P3[5]
100
99
NC
CY8C24094 OCD
Not for Production
February 15, 2007
Document No. 38-12018 Rev. *J
18
[+] Feedback
2. Register Reference
This chapter lists the registers of the CY8C24x94 PSoC device family. For detailed register information, reference the
PSoC Mixed-Signal Array Technical Reference Manual.
2.1
2.1.1
Register Conventions
2.2
Abbreviations Used
The register conventions specific to this section are listed in the
following table.
Convention
R
Description
Read register or bit(s)
W
Write register or bit(s)
L
Logical register or bit(s)
C
Clearable register or bit(s)
#
Access is bit specific
February 15, 2007
Register Mapping Tables
The PSoC device has a total register address space of 512
bytes. The register space is referred to as IO space and is
divided into two banks. The XOI bit in the Flag register (CPU_F)
determines which bank the user is currently in. When the XOI
bit is set the user is in Bank 1.
Note In the following register mapping tables, blank fields are
Reserved and should not be accessed.
Document No. 38-12018 Rev. *J
19
[+] Feedback
CY8C24094, CY8C24794, CY8C24894, and CY8C24994 Final Data Sheet
2. Register Reference
Register Map Bank 0 Table: User Space
RW
RW
RW
RW
RW
RW
RW
RW
W
W
R
R
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
CUR_PP
STK_PP
IDX_PP
MVR_PP
MVW_PP
I2C_CFG
I2C_SCR
I2C_DR
I2C_MSCR
INT_CLR0
INT_CLR1
INT_CLR2
INT_CLR3
INT_MSK3
INT_MSK2
INT_MSK0
INT_MSK1
INT_VC
RES_WDT
DEC_DH
DEC_DL
DEC_CR0
DEC_CR1
MUL0_X
MUL0_Y
MUL0_DH
MUL0_DL
ACC0_DR1
ACC0_DR0
ACC0_DR3
ACC0_DR2
CPU_F
DAC_D
CPU_SCR1
CPU_SCR0
Document No. 38-12018 Rev. *J
C0
C1
C2
C3
C4
C5
C6
C7
C8
C9
CA
CB
CC
CD
CE
CF
D0
D1
D2
D3
D4
D5
D6
D7
D8
D9
DA
DB
DC
DD
DE
DF
E0
E1
E2
E3
E4
E5
E6
E7
E8
E9
EA
EB
EC
ED
EE
EF
F0
F1
F2
F3
F4
F5
F6
F7
F8
F9
FA
FB
FC
FD
FE
FF
Access
RW
RW
RW
RW
RW
RW
RW
RW
Addr
(0,Hex)
Name
80
81
82
83
84
85
86
87
88
89
8A
8B
8C
8D
8E
8F
90
ASD20CR0
91
ASD20CR1
92
ASD20CR2
93
ASD20CR3
94
ASC21CR0
95
ASC21CR1
96
ASC21CR2
97
ASC21CR3
98
99
9A
9B
9C
9D
9E
9F
A0
A1
A2
A3
A4
A5
A6
A7
A8
MUL1_X
A9
MUL1_Y
AA
MUL1_DH
AB
MUL1_DL
AC
ACC1_DR1
AD
ACC1_DR0
AE
ACC1_DR3
AF
ACC1_DR2
B0
RDI0RI
B1
RDI0SYN
B2
RDI0IS
B3
RDI0LT0
B4
RDI0LT1
B5
RDI0RO0
B6
RDI0RO1
B7
B8
B9
BA
BB
BC
BD
BE
BF
# Access is bit specific.
ASC10CR0
ASC10CR1
ASC10CR2
ASC10CR3
ASD11CR0
ASD11CR1
ASD11CR2
ASD11CR3
Access
Addr
(0,Hex)
February 15, 2007
Name
Access
Addr
(0,Hex)
Name
Access
Addr
(0,Hex)
Name
00
RW
PMA0_DR
40
RW
01
RW
PMA1_DR
41
RW
02
RW
PMA2_DR
42
RW
03
RW
PMA3_DR
43
RW
04
RW
PMA4_DR
44
RW
05
RW
PMA5_DR
45
RW
06
RW
PMA6_DR
46
RW
07
RW
PMA7_DR
47
RW
08
RW
USB_SOF0
48
R
09
RW
USB_SOF1
49
R
0A
RW
USB_CR0
4A
RW
0B
RW
USBIO_CR0
4B
#
0C
USBIO_CR1
4C
RW
RW
0D
4D
RW
0E
EP1_CNT1
4E
#
RW
0F
EP1_CNT
4F
RW
RW
10
EP2_CNT1
50
#
RW
11
EP2_CNT
51
RW
RW
12
EP3_CNT1
52
#
RW
13
EP3_CNT
53
RW
RW
14
EP4_CNT1
54
#
RW
15
EP4_CNT
55
RW
RW
16
EP0_CR
56
#
RW
17
EP0_CNT
57
#
RW
18
EP0_DR0
58
RW
19
EP0_DR1
59
RW
1A
EP0_DR2
5A
RW
1B
EP0_DR3
5B
RW
1C
EP0_DR4
5C
RW
RW
PRT7DR
1D
EP0_DR5
5D
RW
RW
PRT7IE
1E
EP0_DR6
5E
RW
RW
PRT7GS
1F
EP0_DR7
5F
RW
RW
PRT7DM2
60
20
RW
DBB00DR0
#
AMX_IN
61
21
DBB00DR1
W
AMUXCFG
RW
62
22
DBB00DR2
RW
63
23
RW
DBB00CR0
#
ARF_CR
64
24
#
DBB01DR0
#
CMP_CR0
65
25
#
DBB01DR1
W
ASY_CR
66
26
RW
DBB01DR2
RW
CMP_CR1
67
27
DBB01CR0
#
68
28
DCB02DR0
#
69
29
DCB02DR1
W
6A
2A
DCB02DR2
RW
6B
2B
DCB02CR0
#
6C
2C
RW
DCB03DR0
#
TMP_DR0
6D
2D
RW
DCB03DR1
W
TMP_DR1
6E
2E
RW
DCB03DR2
RW
TMP_DR2
6F
2F
RW
DCB03CR0
#
TMP_DR3
30
70
RW
ACB00CR3
31
71
RW
ACB00CR0
32
72
RW
ACB00CR1
33
73
RW
ACB00CR2
34
74
RW
ACB01CR3
75
35
RW
ACB01CR0
36
76
RW
ACB01CR1
37
77
RW
ACB01CR2
78
38
39
79
3A
7A
7B
3B
3C
7C
7D
3D
7E
3E
7F
3F
Blank fields are Reserved and should not be accessed.
PRT0DR
PRT0IE
PRT0GS
PRT0DM2
PRT1DR
PRT1IE
PRT1GS
PRT1DM2
PRT2DR
PRT2IE
PRT2GS
PRT2DM2
PRT3DR
PRT3IE
PRT3GS
PRT3DM2
PRT4DR
PRT4IE
PRT4GS
PRT4DM2
PRT5DR
PRT5IE
PRT5GS
PRT5DM2
RW
RW
RW
RW
RW
RW
#
RW
#
RW
RW
RW
RW
RW
RW
RW
RW
RC
W
RC
RC
RW
RW
W
W
R
R
RW
RW
RW
RW
RL
RW
#
#
20
[+] Feedback
CY8C24094, CY8C24794, CY8C24894, and CY8C24994 Final Data Sheet
2. Register Reference
Register Map Bank 1 Table: Configuration Space
RW
RW
RW
RW
RW
RW
RW
EP1_CR0
EP2_CR0
EP3_CR0
EP4_CR0
C0
C1
C4
C5
C6
C7
C8
C9
CA
CB
CC
CD
CE
CF
D0
GDI_O_IN
D1
GDI_E_IN
D2
GDI_O_OU
D3
GDI_E_OU
D4
D5
D6
D7
D8
MUX_CR0
D9
MUX_CR1
DA
MUX_CR2
DB
MUX_CR3
DC
OSC_GO_EN DD
DE
OSC_CR4
DF
OSC_CR3
E0
OSC_CR0
E1
OSC_CR1
E2
OSC_CR2
E3
VLT_CR
E4
VLT_CMP
E5
E6
E7
E8
IMO_TR
E9
ILO_TR
EA
BDG_TR
EB
ECO_TR
EC
MUX_CR4
ED
MUX_CR5
EE
EF
F0
F1
F2
F3
F4
F5
F6
F7
CPU_F
F8
F9
FA
FB
FC
FD
DAC_CR
FE
CPU_SCR1
CPU_SCR0
FF
Document No. 38-12018 Rev. *J
Access
RW
RW
RW
RW
RW
RW
RW
USBIO_CR2
USB_CR1
Addr
(1,Hex)
RW
RW
RW
RW
RW
RW
RW
RW
Name
80
81
82
83
84
85
86
87
88
89
8A
8B
8C
8D
8E
8F
90
91
ASD20CR1
92
ASD20CR2
93
ASD20CR3
94
ASC21CR0
95
ASC21CR1
96
ASC21CR2
97
ASC21CR3
98
99
9A
9B
9C
9D
9E
9F
A0
A1
A2
A3
A4
A5
A6
A7
A8
A9
AA
AB
AC
AD
AE
AF
B0
RDI0RI
B1
RDI0SYN
B2
RDI0IS
B3
RDI0LT0
B4
RDI0LT1
B5
RDI0RO0
B6
RDI0RO1
B7
B8
B9
BA
BB
BC
BD
BE
BF
# Access is bit specific.
ASC10CR0
ASC10CR1
ASC10CR2
ASC10CR3
ASD11CR0
ASD11CR1
ASD11CR2
ASD11CR3
Access
Addr
(1,Hex)
February 15, 2007
Name
Access
Addr
(1,Hex)
Name
Access
Addr
(1,Hex)
Name
40
00
RW
RW
PMA0_WA
41
01
RW
RW
PMA1_WA
42
02
RW
RW
PMA2_WA
43
03
RW
RW
PMA3_WA
44
04
RW
RW
PMA4_WA
45
05
RW
RW
PMA5_WA
46
06
RW
RW
PMA6_WA
47
07
RW
RW
PMA7_WA
48
08
RW
49
09
RW
4A
0A
RW
4B
0B
RW
4C
0C
RW
4D
0D
RW
4E
0E
RW
4F
0F
RW
50
10
RW
RW
PMA0_RA
51
11
RW
RW
PMA1_RA
52
12
RW
RW
PMA2_RA
53
13
RW
RW
PMA3_RA
54
14
RW
RW
PMA4_RA
55
15
RW
RW
PMA5_RA
16
56
RW
RW
PMA6_RA
17
57
RW
RW
PMA7_RA
18
58
19
59
1A
5A
1B
5B
1C
5C
RW
PRT7DM0
1D
5D
RW
PRT7DM1
1E
5E
RW
PRT7IC0
1F
5F
RW
PRT7IC1
20
60
RW
RW
DBB00FN
CLK_CR0
21
61
RW
RW
DBB00IN
CLK_CR1
22
62
RW
RW
DBB00OU
ABF_CR0
23
63
RW
AMD_CR0
64
24
DBB01FN
RW
CMP_GO_EN
RW
65
25
DBB01IN
RW
CMP_GO_EN1
RW
66
26
RW
DBB01OU
RW
AMD_CR1
27
67
RW
ALT_CR0
68
28
DCB02FN
RW
69
29
DCB02IN
RW
6A
2A
DCB02OU
RW
2B
6B
6C
2C
RW
DCB03FN
RW
TMP_DR0
6D
2D
RW
DCB03IN
RW
TMP_DR1
6E
2E
RW
DCB03OU
RW
TMP_DR2
2F
6F
RW
TMP_DR3
30
70
RW
ACB00CR3
31
71
RW
ACB00CR0
32
72
RW
ACB00CR1
33
73
RW
ACB00CR2
34
74
RW
ACB01CR3
35
75
RW
ACB01CR0
36
76
RW
ACB01CR1
37
77
RW
ACB01CR2
78
38
39
79
7A
3A
3B
7B
7C
3C
3D
7D
7E
3E
3F
7F
Blank fields are Reserved and should not be accessed.
PRT0DM0
PRT0DM1
PRT0IC0
PRT0IC1
PRT1DM0
PRT1DM1
PRT1IC0
PRT1IC1
PRT2DM0
PRT2DM1
PRT2IC0
PRT2IC1
PRT3DM0
PRT3DM1
PRT3IC0
PRT3IC1
PRT4DM0
PRT4DM1
PRT4IC0
PRT4IC1
PRT5DM0
PRT5DM1
PRT5IC0
PRT5IC1
RW
#
#
#
#
#
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
R
W
W
RW
W
RW
RW
RL
RW
#
#
21
[+] Feedback
3. Electrical Specifications
This chapter presents the DC and AC electrical specifications of the CY8C24x94 PSoC device family. For the most up to date electrical specifications, confirm that you have the most recent data sheet by going to the web at http://www.cypress.com/psoc.
Specifications are valid for -40oC ≤ TA ≤ 85oC and TJ ≤ 100oC, except where noted. Specifications for devices running at greater
than 12 MHz are valid for -40oC ≤ TA ≤ 70oC and TJ ≤ 82oC.
Figure 3-1. Voltage versus CPU Frequency
5.25
Vdd Voltage
lid ng
Va rati n
e io
Op Reg
4.75
3.00
93 kHz
12 MHz
24 MHz
CPUFrequency
The following table lists the units of measure that are used in this chapter.
Table 3-1: Units of Measure
Symbol
Unit of Measure
Symbol
Unit of Measure
degree Celsius
µW
microwatts
dB
decibels
mA
milli-ampere
fF
femto farad
ms
milli-second
Hz
hertz
mV
milli-volts
KB
1024 bytes
nA
nanoampere
Kbit
1024 bits
ns
nanosecond
kHz
kilohertz
nV
nanovolts
kΩ
kilohm
Ω
ohm
MHz
megahertz
pA
picoampere
MΩ
megaohm
pF
picofarad
µA
microampere
pp
peak-to-peak
µF
microfarad
ppm
µH
microhenry
ps
picosecond
µs
microsecond
sps
samples per second
µV
microvolts
σ
sigma: one standard deviation
microvolts root-mean-square
V
volts
o
C
µVrms
February 15, 2007
parts per million
Document No. 38-12018 Rev. *J
22
[+] Feedback
CY8C24094, CY8C24794, CY8C24894, and CY8C24994 Final Data Sheet
3.1
3. Electrical Specifications
Absolute Maximum Ratings
Table 3-2. Absolute Maximum Ratings
Symbol
Description
Min
Typ
Max
Units
TSTG
Storage Temperature
-55
25
+100
oC
TA
Ambient Temperature with Power Applied
-40
–
+85
oC
Vdd
Supply Voltage on Vdd Relative to Vss
-0.5
–
+6.0
V
VIO
DC Input Voltage
Vss - 0.5
–
Vdd + 0.5
V
VIO2
DC Voltage Applied to Tri-state
Vss - 0.5
–
Vdd + 0.5
V
IMIO
Maximum Current into any Port Pin
-25
–
+50
mA
IMAIO
Maximum Current into any Port Pin Configured as Analog
Driver
-50
–
+50
mA
ESD
Electro Static Discharge Voltage
2000
–
–
V
LU
Latch-up Current
–
–
200
mA
3.2
Notes
Higher storage temperatures will reduce data
retention time. Recommended storage temperature is +25oC ± 25oC. Extended duration storage temperatures above 65oC will degrade
reliability.
Human Body Model ESD.
Operating Temperature
Table 3-3. Operating Temperature
Symbol
Description
Min
Typ
Max
Units
TA
Ambient Temperature
-40
–
+85
o
TAUSB
Ambient Temperature using USB
-10
–
+85
oC
TJ
Junction Temperature
-40
–
+100
o
3.3
3.3.1
Notes
C
C
The temperature rise from ambient to junction is
package specific. See “Thermal Impedance” on
page 42. The user must limit the power consumption to comply with this requirement.
DC Electrical Characteristics
DC Chip-Level Specifications
The following table lists guaranteed maximum and minimum specifications for the voltage and temperature ranges: 4.75V to 5.25V
and -40°C ≤ TA ≤ 85°C, or 3.0V to 3.6V and -40°C ≤ TA ≤ 85°C, respectively. Typical parameters apply to 5V and 3.3V at 25°C and
are for design guidance only.
Table 3-4. DC Chip-Level Specifications
Symbol
Description
Min
Typ
Max
Units
Notes
Vdd
Supply Voltage
3.0
–
5.25
V
See DC POR and LVD specifications, Table 315 on page 29.
IDD5
Supply Current, IMO = 24 MHz (5V)
–
14
27
mA
Conditions are Vdd = 5.0V, TA = 25 oC, CPU = 3
MHz, SYSCLK doubler disabled, VC1 = 1.5
MHz, VC2 = 93.75 kHz, VC3 = 93.75 kHz, analog power = off.
IDD3
Supply Current, IMO = 24 MHz (3.3V)
–
8
14
mA
Conditions are Vdd = 3.3V, TA = 25 oC, CPU = 3
MHz, SYSCLK doubler disabled, VC1 = 1.5
MHz, VC2 = 93.75 kHz, VC3 = 0.367 kHz, analog power = off.
ISB
Sleep (Mode) Current with POR, LVD, Sleep Timer, and
WDT.a
–
3
6.5
µA
Conditions are with internal slow speed oscillator, Vdd = 3.3V, -40 oC ≤ TA ≤ 55 oC, analog
power = off.
ISBH
Sleep (Mode) Current with POR, LVD, Sleep Timer, and
WDT at high temperature.a
–
4
25
µA
Conditions are with internal slow speed oscillator, Vdd = 3.3V, 55 oC < TA ≤ 85 oC, analog
power = off.
a. Standby current includes all functions (POR, LVD, WDT, Sleep Time) needed for reliable system operation. This should be compared with devices that have similar functions
enabled.
February 15, 2007
Document No. 38-12018 Rev. *J
23
[+] Feedback
CY8C24094, CY8C24794, CY8C24894, and CY8C24994 Final Data Sheet
3.3.2
3. Electrical Specifications
DC General Purpose IO Specifications
The following table lists guaranteed maximum and minimum specifications for the voltage and temperature ranges: 4.75V to 5.25V
and -40°C ≤ TA ≤ 85°C, or 3.0V to 3.6V and -40°C ≤ TA ≤ 85°C, respectively. Typical parameters apply to 5V and 3.3V at 25°C and
are for design guidance only.
Table 3-5. DC GPIO Specifications
Symbol
Description
Min
Typ
Max
Units
Notes
RPU
Pull-Up Resistor
4
5.6
8
kΩ
RPD
Pull-Down Resistor
4
5.6
8
kΩ
VOH
High Output Level
Vdd - 1.0
–
–
V
IOH = 10 mA, Vdd = 4.75 to 5.25V (8 total loads,
4 on even port pins (for example, P0[2], P1[4]),
4 on odd port pins (for example, P0[3], P1[5])).
80 mA maximum combined IOH budget.
VOL
Low Output Level
–
–
0.75
V
IOL = 25 mA, Vdd = 4.75 to 5.25V (8 total loads,
4 on even port pins (for example, P0[2], P1[4]),
4 on odd port pins (for example, P0[3], P1[5])).
200 mA maximum combined IOL budget.
VIL
Input Low Level
–
–
0.8
V
Vdd = 3.0 to 5.25.
VIH
Input High Level
2.1
–
V
Vdd = 3.0 to 5.25.
VH
Input Hysterisis
–
60
–
mV
IIL
Input Leakage (Absolute Value)
–
1
–
nA
Gross tested to 1 µA.
CIN
Capacitive Load on Pins as Input
–
3.5
10
pF
Package and pin dependent. Temp = 25oC.
COUT
Capacitive Load on Pins as Output
–
3.5
10
pF
Package and pin dependent. Temp = 25oC.
3.3.3
DC Full-Speed USB Specifications
The following table lists guaranteed maximum and minimum specifications for the voltage and temperature ranges: 4.75V to 5.25V
and -10°C ≤ TA ≤ 85°C, or 3.0V to 3.6V and -10°C ≤ TA ≤ 85°C, respectively. Typical parameters apply to 5V and 3.3V at 25°C and
are for design guidance only.
Table 3-6. DC Full-Speed (12 Mbps) USB Specifications
Symbol
Description
Min
Typ
Max
Units
Notes
USB Interface
VDI
Differential Input Sensitivity
0.2
–
–
V
VCM
Differential Input Common Mode Range
0.8
–
2.5
V
VSE
Single Ended Receiver Threshold
0.8
–
2.0
V
CIN
Transceiver Capacitance
–
–
20
pF
| (D+) - (D-) |
IIO
High-Z State Data Line Leakage
-10
–
10
µA
0V < VIN < 3.3V.
REXT
External USB Series Resistor
23
–
25
Ω
In series with each USB pin.
VUOH
Static Output High, Driven
2.8
–
3.6
V
15 kΩ ± 5% to Ground. Internal pull-up enabled.
VUOHI
Static Output High, Idle
2.7
–
3.6
V
15 kΩ ± 5% to Ground. Internal pull-up enabled.
VUOL
Static Output Low
–
–
0.3
V
15 kΩ ± 5% to Ground. Internal pull-up enabled.
ZO
USB Driver Output Impedance
28
–
44
Ω
Including REXT Resistor.
VCRS
D+/D- Crossover Voltage
1.3
–
2.0
V
February 15, 2007
Document No. 38-12018 Rev. *J
24
[+] Feedback
CY8C24094, CY8C24794, CY8C24894, and CY8C24994 Final Data Sheet
3.3.4
3. Electrical Specifications
DC Operational Amplifier Specifications
The following tables list guaranteed maximum and minimum specifications for the voltage and temperature ranges: 4.75V to 5.25V
and -40°C ≤ TA ≤ 85°C, or 3.0V to 3.6V and -40°C ≤ TA ≤ 85°C, respectively. Typical parameters apply to 5V and 3.3V at 25°C and
are for design guidance only.
The Operational Amplifier is a component of both the Analog Continuous Time PSoC blocks and the Analog Switched Capacitor
PSoC blocks. The guaranteed specifications are measured in the Analog Continuous Time PSoC block.
Table 3-7. 5V DC Operational Amplifier Specifications
Symbol
VOSOA
Description
Min
Typ
Max
Units
Notes
Input Offset Voltage (absolute value)
Power = Low, Opamp Bias = High
–
1.6
10
mV
Power = Medium, Opamp Bias = High
–
1.3
8
mV
Power = High, Opamp Bias = High
–
1.2
7.5
mV
TCVOSOA
Average Input Offset Voltage Drift
–
7.0
35.0
µV/oC
IEBOA
Input Leakage Current (Port 0 Analog Pins)
–
20
–
pA
Gross tested to 1 µA.
CINOA
Input Capacitance (Port 0 Analog Pins)
–
4.5
9.5
pF
Package and pin dependent. Temp = 25oC.
VCMOA
Common Mode Voltage Range
0.0
–
Vdd
V
Common Mode Voltage Range (high power or high
opamp bias)
0.5
–
Vdd - 0.5
The common-mode input voltage range is measured through an analog output buffer. The
specification includes the limitations imposed
by the characteristics of the analog output
buffer.
–
–
dB
GOLOA
VOHIGHOA
VOLOWOA
ISOA
PSRROA
Open Loop Gain
Power = Low, Opamp Bias = High
60
Power = Medium, Opamp Bias = High
60
Power = High, Opamp Bias = High
80
High Output Voltage Swing (internal signals)
Power = Low, Opamp Bias = High
Vdd - 0.2
–
–
V
Power = Medium, Opamp Bias = High
Vdd - 0.2
–
–
V
Power = High, Opamp Bias = High
Vdd - 0.5
–
–
V
Power = Low, Opamp Bias = High
–
–
0.2
V
Power = Medium, Opamp Bias = High
–
–
0.2
V
Power = High, Opamp Bias = High
–
–
0.5
V
Power = Low, Opamp Bias = Low
–
400
800
µA
Power = Low, Opamp Bias = High
–
500
900
µA
Power = Medium, Opamp Bias = Low
–
800
1000
µA
Power = Medium, Opamp Bias = High
–
1200
1600
µA
Power = High, Opamp Bias = Low
–
2400
3200
µA
Power = High, Opamp Bias = High
–
4600
6400
µA
Supply Voltage Rejection Ratio
65
80
–
dB
Low Output Voltage Swing (internal signals)
Supply Current (including associated AGND buffer)
February 15, 2007
Document No. 38-12018 Rev. *J
Vss ≤ VIN ≤ (Vdd - 2.25) or (Vdd - 1.25V) ≤ VIN
≤ Vdd.
25
[+] Feedback
CY8C24094, CY8C24794, CY8C24894, and CY8C24994 Final Data Sheet
3. Electrical Specifications
Table 3-8. 3.3V DC Operational Amplifier Specifications
Symbol
VOSOA
Description
Min
Typ
Max
Units
Notes
Input Offset Voltage (absolute value)
Power = Low, Opamp Bias = High
–
1.65
10
mV
Power = Medium, Opamp Bias = High
–
1.32
8
mV
High Power is 5 Volts Only
TCVOSOA
Average Input Offset Voltage Drift
–
7.0
35.0
µV/oC
IEBOA
Input Leakage Current (Port 0 Analog Pins)
–
20
–
pA
Gross tested to 1 µA.
CINOA
Input Capacitance (Port 0 Analog Pins)
–
4.5
9.5
pF
Package and pin dependent. Temp = 25oC.
VCMOA
Common Mode Voltage Range
0.2
–
Vdd - 0.2
V
The common-mode input voltage range is
measured through an analog output buffer.
The specification includes the limitations
imposed by the characteristics of the analog
output buffer.
GOLOA
Open Loop Gain
–
–
dB
VOHIGHOA
VOLOWOA
ISOA
PSRROA
3.3.5
Power = Low, Opamp Bias = Low
60
Power = Medium, Opamp Bias = Low
60
Power = High, Opamp Bias = Low
80
High Output Voltage Swing (internal signals)
Power = Low, Opamp Bias = Low
Vdd - 0.2
–
–
V
Power = Medium, Opamp Bias = Low
Vdd - 0.2
–
–
V
Power = High is 5V only
Vdd - 0.2
–
–
V
Power = Low, Opamp Bias = Low
–
–
0.2
V
Power = Medium, Opamp Bias = Low
–
–
0.2
V
Power = High, Opamp Bias = Low
–
–
0.2
V
Power = Low, Opamp Bias = Low
–
400
800
µA
Power = Low, Opamp Bias = High
–
500
900
µA
Power = Medium, Opamp Bias = Low
–
800
1000
µA
Power = Medium, Opamp Bias = High
–
1200
1600
µA
Power = High, Opamp Bias = Low
–
2400
3200
µA
Power = High, Opamp Bias = High
–
4600
6400
µA
Supply Voltage Rejection Ratio
65
80
–
dB
Low Output Voltage Swing (internal signals)
Supply Current (including associated AGND buffer)
Vss ≤ VIN ≤ (Vdd - 2.25) or (Vdd - 1.25V) ≤
VIN ≤ Vdd.
DC Low Power Comparator Specifications
The following table lists guaranteed maximum and minimum specifications for the voltage and temperature ranges: 4.75V to 5.25V
and -40°C ≤ TA ≤ 85°C, 3.0V to 3.6V and -40°C ≤ TA ≤ 85°C, or 2.4V to 3.0V and -40°C ≤ TA ≤ 85°C, respectively. Typical parameters
apply to 5V at 25°C and are for design guidance only.
Table 3-9. DC Low Power Comparator Specifications
Symbol
Description
Min
Typ
Max
Units
VREFLPC
Low power comparator (LPC) reference voltage range
0.2
–
Vdd - 1
V
ISLPC
LPC supply current
–
10
40
µA
VOSLPC
LPC voltage offset
–
2.5
30
mV
February 15, 2007
Document No. 38-12018 Rev. *J
Notes
26
[+] Feedback
CY8C24094, CY8C24794, CY8C24894, and CY8C24994 Final Data Sheet
3.3.6
3. Electrical Specifications
DC Analog Output Buffer Specifications
The following tables list guaranteed maximum and minimum specifications for the voltage and temperature ranges: 4.75V to 5.25V
and -40°C ≤ TA ≤ 85°C, or 3.0V to 3.6V and -40°C ≤ TA ≤ 85°C, respectively. Typical parameters apply to 5V and 3.3V at 25°C and
are for design guidance only.
Table 3-10. 5V DC Analog Output Buffer Specifications
Symbol
Description
Min
Typ
Max
Units
VOSOB
Input Offset Voltage (Absolute Value)
–
3
12
mV
TCVOSOB
Average Input Offset Voltage Drift
–
+6
–
µV/°C
VCMOB
Common-Mode Input Voltage Range
0.5
–
Vdd - 1.0
V
ROUTOB
Output Resistance
Power = Low
–
0.6
–
Ω
Power = High
–
0.6
–
Ω
High Output Voltage Swing (Load = 32 ohms to Vdd/2)
Power = Low
0.5 x Vdd + 1.1 –
–
V
0.5 x Vdd + 1.1 –
–
V
Power = Low
–
–
0.5 x Vdd - 1.3
V
Power = High
–
–
0.5 x Vdd - 1.3
V
Power = Low
–
1.1
5.1
mA
Power = High
–
2.6
8.8
mA
Supply Voltage Rejection Ratio
53
64
–
dB
VOHIGHOB
Power = High
VOLOWOB
ISOB
PSRROB
Notes
Low Output Voltage Swing (Load = 32 ohms to Vdd/2)
Supply Current Including Bias Cell (No Load)
(0.5 x Vdd - 1.3) ≤ VOUT ≤ (Vdd 2.3).
Table 3-11. 3.3V DC Analog Output Buffer Specifications
Symbol
Description
Min
Typ
Max
Units
VOSOB
Input Offset Voltage (Absolute Value)
–
3
12
mV
TCVOSOB
Average Input Offset Voltage Drift
–
+6
–
µV/°C
VCMOB
Common-Mode Input Voltage Range
0.5
-
Vdd - 1.0
V
ROUTOB
Output Resistance
Power = Low
–
1
–
Ω
Power = High
–
1
–
Ω
Power = Low
0.5 x Vdd + 1.0 –
–
V
Power = High
0.5 x Vdd + 1.0 –
–
V
Power = Low
–
–
0.5 x Vdd - 1.0
V
Power = High
–
–
0.5 x Vdd - 1.0
V
VOHIGHOB
VOLOWOB
ISOB
High Output Voltage Swing (Load = 1K ohms to Vdd/2)
Low Output Voltage Swing (Load = 1K ohms to Vdd/2)
Supply Current Including Bias Cell (No Load)
Power = Low
PSRROB
Notes
0.8
2.0
mA
Power = High
–
2.0
4.3
mA
Supply Voltage Rejection Ratio
34
64
–
dB
February 15, 2007
Document No. 38-12018 Rev. *J
(0.5 x Vdd - 1.0) ≤ VOUT ≤ (0.5 x
Vdd + 0.9).
27
[+] Feedback
CY8C24094, CY8C24794, CY8C24894, and CY8C24994 Final Data Sheet
3.3.7
3. Electrical Specifications
DC Analog Reference Specifications
The following tables list guaranteed maximum and minimum specifications for the voltage and temperature ranges: 4.75V to 5.25V
and -40°C ≤ TA ≤ 85°C, or 3.0V to 3.6V and -40°C ≤ TA ≤ 85°C, respectively. Typical parameters apply to 5V and 3.3V at 25°C and
are for design guidance only.
The guaranteed specifications are measured through the Analog Continuous Time PSoC blocks. The power levels for AGND refer to
the power of the Analog Continuous Time PSoC block. The power levels for RefHi and RefLo refer to the Analog Reference Control
register. The limits stated for AGND include the offset error of the AGND buffer local to the Analog Continuous Time PSoC block.
Reference control power is high.
Table 3-12. 5V DC Analog Reference Specifications
Symbol
Description
Min
Typ
Max
Units
BG
Bandgap Voltage Reference
1.28
1.30
1.32
V
–
AGND = Vdd/2a
Vdd/2 - 0.04
Vdd/2 - 0.01
Vdd/2 + 0.007
V
2 x BG - 0.048
2 x BG - 0.030
2 x BG + 0.024
V
P2[4] - 0.011
P2[4]
P2[4] + 0.011
V
BG - 0.009
BG + 0.008
BG + 0.016
V
1.6 x BG - 0.022
1.6 x BG - 0.010
1.6 x BG + 0.018
V
-0.034
0.000
0.034
V
–
a
AGND = 2 x BandGap
–
AGND = P2[4] (P2[4] =
–
AGND = BandGapa
–
Vdd/2)a
a
AGND = 1.6 x BandGap
–
AGND Block to Block Variation (AGND = Vdd/2)
–
RefHi = Vdd/2 + BandGap
Vdd/2 + BG - 0.10
Vdd/2 + BG
Vdd/2 + BG + 0.10
V
–
RefHi = 3 x BandGap
3 x BG - 0.06
3 x BG
3 x BG + 0.06
V
–
RefHi = 2 x BandGap + P2[6] (P2[6] = 1.3V)
2 x BG + P2[6] - 0.113
2 x BG + P2[6] - 0.018
2 x BG + P2[6] + 0.077
V
–
RefHi = P2[4] + BandGap (P2[4] = Vdd/2)
P2[4] + BG - 0.130
P2[4] + BG - 0.016
P2[4] + BG + 0.098
V
–
RefHi = P2[4] + P2[6] (P2[4] = Vdd/2, P2[6] = 1.3V)
P2[4] + P2[6] - 0.133
P2[4] + P2[6] - 0.016
P2[4] + P2[6]+ 0.100
V
–
RefHi = 3.2 x BandGap
3.2 x BG - 0.112
3.2 x BG
3.2 x BG + 0.076
V
–
RefLo = Vdd/2 – BandGap
Vdd/2 - BG - 0.04
Vdd/2 - BG + 0.024
Vdd/2 - BG + 0.04
V
–
RefLo = BandGap
BG - 0.06
BG
BG + 0.06
V
–
RefLo = 2 x BandGap - P2[6] (P2[6] = 1.3V)
2 x BG - P2[6] - 0.084
2 x BG - P2[6] + 0.025
2 x BG - P2[6] + 0.134
V
–
RefLo = P2[4] – BandGap (P2[4] = Vdd/2)
P2[4] - BG - 0.056
P2[4] - BG + 0.026
P2[4] - BG + 0.107
V
–
RefLo = P2[4]-P2[6] (P2[4] = Vdd/2, P2[6] = 1.3V)
P2[4] - P2[6] - 0.057
P2[4] - P2[6] + 0.026
P2[4] - P2[6] + 0.110
V
a
a. AGND tolerance includes the offsets of the local buffer in the PSoC block. Bandgap voltage is 1.3V ± 0.02V.
Table 3-13. 3.3V DC Analog Reference Specifications
Symbol
Description
Min
Typ
Max
Units
BG
Bandgap Voltage Reference
1.28
1.30
1.32
V
–
AGND = Vdd/2a
Vdd/2 - 0.03
Vdd/2 - 0.01
Vdd/2 + 0.005
V
–
AGND = 2 x BandGapa
Not Allowed
–
AGND = P2[4] (P2[4] = Vdd/2)
P2[4] - 0.008
P2[4] + 0.001
P2[4] + 0.009
V
–
AGND = BandGapa
BG - 0.009
BG + 0.005
BG + 0.015
V
–
AGND = 1.6 x BandGapa
1.6 x BG - 0.027
1.6 x BG - 0.010
1.6 x BG + 0.018
V
-0.034
0.000
0.034
V
P2[4] + P2[6] - 0.009
P2[4] + P2[6] + 0.057
V
P2[4]- P2[6] + 0.022
P2[4] - P2[6] + 0.092
V
–
AGND Column to Column Variation (AGND = Vdd/2)
–
RefHi = Vdd/2 + BandGap
Not Allowed
–
RefHi = 3 x BandGap
Not Allowed
–
RefHi = 2 x BandGap + P2[6] (P2[6] = 0.5V)
Not Allowed
–
RefHi = P2[4] + BandGap (P2[4] = Vdd/2)
Not Allowed
–
RefHi = P2[4] + P2[6] (P2[4] = Vdd/2, P2[6] = 0.5V)
P2[4] + P2[6] - 0.075
–
RefHi = 3.2 x BandGap
Not Allowed
–
RefLo = Vdd/2 - BandGap
Not Allowed
–
RefLo = BandGap
Not Allowed
–
RefLo = 2 x BandGap - P2[6] (P2[6] = 0.5V)
Not Allowed
–
RefLo = P2[4] – BandGap (P2[4] = Vdd/2)
Not Allowed
–
RefLo = P2[4]-P2[6] (P2[4] = Vdd/2, P2[6] = 0.5V)
P2[4] - P2[6] - 0.048
a
a. AGND tolerance includes the offsets of the local buffer in the PSoC block. Bandgap voltage is 1.3V ± 0.02V.
February 15, 2007
Document No. 38-12018 Rev. *J
28
[+] Feedback
CY8C24094, CY8C24794, CY8C24894, and CY8C24994 Final Data Sheet
3.3.8
3. Electrical Specifications
DC Analog PSoC Block Specifications
The following table lists guaranteed maximum and minimum specifications for the voltage and temperature ranges: 4.75V to 5.25V
and -40°C ≤ TA ≤ 85°C, or 3.0V to 3.6V and -40°C ≤ TA ≤ 85°C, respectively. Typical parameters apply to 5V and 3.3V at 25°C and
are for design guidance only.
Table 3-14. DC Analog PSoC Block Specifications
Symbol
Description
Min
Typ
Max
Units
RCT
Resistor Unit Value (Continuous Time)
–
12.2
–
kΩ
CSC
Capacitor Unit Value (Switched Capacitor)
–
80
–
fF
3.3.9
Notes
DC POR and LVD Specifications
The following table lists guaranteed maximum and minimum specifications for the voltage and temperature ranges: 4.75V to 5.25V
and -40°C ≤ TA ≤ 85°C, or 3.0V to 3.6V and -40°C ≤ TA ≤ 85°C, respectively. Typical parameters apply to 5V or 3.3V at 25°C and are
for design guidance only.
Note The bits PORLEV and VM in the table below refer to bits in the VLT_CR register. See the PSoC Mixed-Signal Array Technical
Reference Manual for more information on the VLT_CR register.
Table 3-15. DC POR and LVD Specifications
Symbol
Description
Min
Typ
Max
Units
Notes
Vdd Value for PPOR Trip (positive ramp)
VPPOR0R
PORLEV[1:0] = 00b
VPPOR1R
PORLEV[1:0] = 01b
VPPOR2R
PORLEV[1:0] = 10b
2.91
–
4.39
V
–
4.55
V
V
Vdd Value for PPOR Trip (negative ramp)
VPPOR0
PORLEV[1:0] = 00b
VPPOR1
PORLEV[1:0] = 01b
VPPOR2
PORLEV[1:0] = 10b
2.82
–
4.39
V
–
4.55
V
V
PPOR Hysteresis
VPH0
PORLEV[1:0] = 00b
–
92
–
mV
VPH1
PORLEV[1:0] = 01b
–
0
–
mV
VPH2
PORLEV[1:0] = 10b
–
0
–
mV
Vdd Value for LVD Trip
VLVD0
VM[2:0] = 000b
2.86
2.92
2.98a
V
VLVD1
VM[2:0] = 001b
2.96
3.02
3.08
VLVD2
VM[2:0] = 010b
3.07
3.13
3.20
VLVD3
VM[2:0] = 011b
3.92
4.00
4.08
VLVD4
VM[2:0] = 100b
4.39
4.48
4.57
VLVD5
VM[2:0] = 101b
4.55
4.64
4.74b
VLVD6
VM[2:0] = 110b
4.63
4.73
VLVD7
VM[2:0] = 111b
4.72
4.81
V
V
V
V
V
V
V
V
4.82
4.91
a. Always greater than 50 mV above PPOR (PORLEV = 00) for falling supply.
b. Always greater than 50 mV above PPOR (PORLEV = 10) for falling supply.
February 15, 2007
Document No. 38-12018 Rev. *J
29
[+] Feedback
CY8C24094, CY8C24794, CY8C24894, and CY8C24994 Final Data Sheet
3.3.10
3. Electrical Specifications
DC Programming Specifications
The following table lists guaranteed maximum and minimum specifications for the voltage and temperature ranges: 4.75V to 5.25V
and -40°C ≤ TA ≤ 85°C, or 3.0V to 3.6V and -40°C ≤ TA ≤ 85°C, respectively. Typical parameters apply to 5V and 3.3V at 25°C and
are for design guidance only.
Table 3-16. DC Programming Specifications
Symbol
Description
Min
Typ
Max
Units
Notes
IDDP
Supply Current During Programming or Verify
–
15
30
mA
VILP
Input Low Voltage During Programming or Verify
–
–
0.8
V
VIHP
Input High Voltage During Programming or Verify
2.1
–
–
V
IILP
Input Current when Applying Vilp to P1[0] or P1[1] During
Programming or Verify
–
–
0.2
mA
Driving internal pull-down resistor.
IIHP
Input Current when Applying Vihp to P1[0] or P1[1] During
Programming or Verify
–
–
1.5
mA
Driving internal pull-down resistor.
VOLV
Output Low Voltage During Programming or Verify
–
–
Vss + 0.75
V
VOHV
Output High Voltage During Programming or Verify
Vdd - 1.0
–
Vdd
V
FlashENPB
Flash Endurance (per block)
50,000
–
–
–
Erase/write cycles per block.
1,800,000
–
–
–
Erase/write cycles.
10
–
–
Years
FlashENT
Flash Endurance (total)
FlashDR
Flash Data Retention
a
a. A maximum of 36 x 50,000 block endurance cycles is allowed. This may be balanced between operations on 36x1 blocks of 50,000 maximum cycles each, 36x2 blocks of
25,000 maximum cycles each, or 36x4 blocks of 12,500 maximum cycles each (to limit the total number of cycles to 36x50,000 and that no single block ever sees more than
50,000 cycles).
For the full industrial range, the user must employ a temperature sensor user module (FlashTemp) and feed the result to the temperature argument before writing. Refer to
the Flash APIs Application Note AN2015 at http://www.cypress.com under Application Notes for more information.
February 15, 2007
Document No. 38-12018 Rev. *J
30
[+] Feedback
CY8C24094, CY8C24794, CY8C24894, and CY8C24994 Final Data Sheet
3.4
3. Electrical Specifications
AC Electrical Characteristics
3.4.1
AC Chip-Level Specifications
The following table lists guaranteed maximum and minimum specifications for the voltage and temperature ranges: 4.75V to 5.25V
and -40°C ≤ TA ≤ 85°C, or 3.0V to 3.6V and -40°C ≤ TA ≤ 85°C, respectively. Typical parameters apply to 5V and 3.3V at 25°C and
are for design guidance only.
Table 3-17. AC Chip-Level Specifications
Symbol
Description
Min
Typ
Max
Units
Notes
FIMO245V
Internal Main Oscillator Frequency for 24 MHz (5V)
23.04
24
24.96
a,b
MHz
Trimmed for 5V operation using factory trim
values.
FIMO243V
Internal Main Oscillator Frequency for 24 MHz (3.3V)
22.08
24
25.92b,c
MHz
Trimmed for 3.3V operation using factory
trim values.
FIMOUSB5V
Internal Main Oscillator Frequency with USB (5V)
Frequency locking enabled and USB traffic present.
23.94
24
24.06b
MHz
-10°C ≤ TA ≤ 85°C
4.35 ≤ Vdd ≤ 5.15
FIMOUSB3V
Internal Main Oscillator Frequency with USB (3.3V)
Frequency locking enabled and USB traffic present.
23.94
24
24.06b
MHz
-0°C ≤ TA ≤ 70°C
3.15 ≤ Vdd ≤ 3.45
FCPU1
CPU Frequency (5V Nominal)
0.93
24
24.96a,b
MHz
FCPU2
CPU Frequency (3.3V Nominal)
0.93
12
b,c
12.96
MHz
FBLK5
Digital PSoC Block Frequency (5V Nominal)
0
48
49.92a,b,d
MHz
FBLK3
Digital PSoC Block Frequency (3.3V Nominal)
0
24
25.92
MHz
F32K1
Internal Low Speed Oscillator Frequency
15
32
64
kHz
Jitter32k
32 kHz Period Jitter
–
100
Step24M
24 MHz Trim Step Size
–
50
–
kHz
Fout48M
48 MHz Output Frequency
46.08
48.0
49.92a,c
MHz
Jitter24M1
24 MHz Period Jitter (IMO) Peak-to-Peak
–
300
FMAX
Maximum frequency of signal on row input or row output.
–
–
12.96
MHz
TRAMP
Supply Ramp Time
0
–
–
µs
a.
b.
c.
d.
b, d
Refer to the AC Digital Block Specifications.
ns
Trimmed. Utilizing factory trim values.
ps
4.75V < Vdd < 5.25V.
Accuracy derived from Internal Main Oscillator with appropriate trim for Vdd range.
3.0V < Vdd < 3.6V. See Application Note AN2012 “Adjusting PSoC Microcontroller Trims for Dual Voltage-Range Operation” for information on trimming for operation at 3.3V.
See the individual user module data sheets for information on maximum frequencies for user modules.
Figure 3-2. 24 MHz Period Jitter (IMO) Timing Diagram
Jitter24M1
F24M
February 15, 2007
Document No. 38-12018 Rev. *J
31
[+] Feedback
CY8C24094, CY8C24794, CY8C24894, and CY8C24994 Final Data Sheet
3.4.2
3. Electrical Specifications
AC General Purpose IO Specifications
The following table lists guaranteed maximum and minimum specifications for the voltage and temperature ranges: 4.75V to 5.25V
and -40°C ≤ TA ≤ 85°C, or 3.0V to 3.6V and -40°C ≤ TA ≤ 85°C, respectively. Typical parameters apply to 5V and 3.3V at 25°C and
are for design guidance only.
Table 3-18. AC GPIO Specifications
Symbol
FGPIO
Description
Min
GPIO Operating Frequency
0
Typ
–
Max
12
Units
MHz
Notes
Normal Strong Mode
TRiseF
Rise Time, Normal Strong Mode, Cload = 50 pF
3
–
18
ns
Vdd = 4.5 to 5.25V, 10% - 90%
TFallF
Fall Time, Normal Strong Mode, Cload = 50 pF
2
–
18
ns
Vdd = 4.5 to 5.25V, 10% - 90%
TRiseS
Rise Time, Slow Strong Mode, Cload = 50 pF
10
27
–
ns
Vdd = 3 to 5.25V, 10% - 90%
TFallS
Fall Time, Slow Strong Mode, Cload = 50 pF
10
22
–
ns
Vdd = 3 to 5.25V, 10% - 90%
Figure 3-3. GPIO Timing Diagram
90%
GPIO
Pin
O u tp u t
Vo lta g e
10%
TR ise F
TR ise S
3.4.3
TFallF
TF a llS
AC Full-Speed USB Specifications
The following table lists guaranteed maximum and minimum specifications for the voltage and temperature ranges: 4.75V to 5.25V
and -10°C ≤ TA ≤ 85°C, or 3.0V to 3.6V and -10°C ≤ TA ≤ 85°C, respectively. Typical parameters apply to 5V and 3.3V at 25°C and
are for design guidance only.
Table 3-19. AC Full-Speed (12 Mbps) USB Specifications
Symbol
Description
Min
Typ
Max
Units
Notes
TRFS
Transition Rise Time
4
–
20
ns
For 50 pF load.
TFSS
Transition Fall Time
4
–
20
ns
For 50 pF load.
TRFMFS
Rise/Fall Time Matching: (TR/TF)
90
–
111
%
For 50 pF load.
12 - 0.25%
12
12 + 0.25% Mbps
TDRATEFS Full-Speed Data Rate
February 15, 2007
Document No. 38-12018 Rev. *J
32
[+] Feedback
CY8C24094, CY8C24794, CY8C24894, and CY8C24994 Final Data Sheet
3.4.4
3. Electrical Specifications
AC Operational Amplifier Specifications
The following tables list guaranteed maximum and minimum specifications for the voltage and temperature ranges: 4.75V to 5.25V
and -40°C ≤ TA ≤ 85°C, or 3.0V to 3.6V and -40°C ≤ TA ≤ 85°C, respectively. Typical parameters apply to 5V and 3.3V at 25°C and
are for design guidance only.
Settling times, slew rates, and gain bandwidth are based on the Analog Continuous Time PSoC block.
Power = High and Opamp Bias = High is not supported at 3.3V.
Table 3-20. 5V AC Operational Amplifier Specifications
Symbol
TROA
TSOA
SRROA
SRFOA
BWOA
ENOA
Description
Min
Typ
Max
Units
Notes
Rising Settling Time from 80% of ∆V to 0.1% of ∆V (10 pF
load, Unity Gain)
Power = Low, Opamp Bias = Low
–
–
3.9
µs
Power = Medium, Opamp Bias = High
–
–
0.72
µs
Power = High, Opamp Bias = High
–
–
0.62
µs
Power = Low, Opamp Bias = Low
–
–
5.9
µs
Power = Medium, Opamp Bias = High
–
–
0.92
µs
Power = High, Opamp Bias = High
–
–
0.72
µs
Power = Low, Opamp Bias = Low
0.15
–
–
V/µs
Power = Medium, Opamp Bias = High
1.7
–
–
V/µs
Power = High, Opamp Bias = High
6.5
–
–
V/µs
Power = Low, Opamp Bias = Low
0.01
–
–
V/µs
Power = Medium, Opamp Bias = High
0.5
–
–
V/µs
Power = High, Opamp Bias = High
4.0
–
–
V/µs
Power = Low, Opamp Bias = Low
0.75
–
–
MHz
Power = Medium, Opamp Bias = High
3.1
–
–
MHz
Power = High, Opamp Bias = High
5.4
–
–
MHz
Noise at 1 kHz (Power = Medium, Opamp Bias = High)
–
100
–
nV/rt-Hz
Falling Settling Time from 20% of ∆V to 0.1% of ∆V (10 pF
load, Unity Gain)
Rising Slew Rate (20% to 80%)(10 pF load, Unity Gain)
Falling Slew Rate (20% to 80%)(10 pF load, Unity Gain)
Gain Bandwidth Product
Table 3-21. 3.3V AC Operational Amplifier Specifications
Symbol
TROA
TSOA
SRROA
SRFOA
BWOA
ENOA
Description
Min
Typ
Max
Units
Notes
Rising Settling Time from 80% of ∆V to 0.1% of ∆V (10 pF
load, Unity Gain)
Power = Low, Opamp Bias = Low
–
–
3.92
µs
Power = Medium, Opamp Bias = High
–
–
0.72
µs
Power = Low, Opamp Bias = Low
–
–
5.41
µs
Power = Medium, Opamp Bias = High
–
–
0.72
µs
Power = Low, Opamp Bias = Low
0.31
–
–
V/µs
Power = Medium, Opamp Bias = High
2.7
–
–
V/µs
Power = Low, Opamp Bias = Low
0.24
–
–
V/µs
Power = Medium, Opamp Bias = High
1.8
–
–
V/µs
Power = Low, Opamp Bias = Low
0.67
–
–
MHz
Power = Medium, Opamp Bias = High
2.8
–
–
MHz
Noise at 1 kHz (Power = Medium, Opamp Bias = High)
–
100
–
nV/rt-Hz
Falling Settling Time from 20% of ∆V to 0.1% of ∆V (10 pF
load, Unity Gain)
Rising Slew Rate (20% to 80%)(10 pF load, Unity Gain)
Falling Slew Rate (20% to 80%)(10 pF load, Unity Gain)
Gain Bandwidth Product
February 15, 2007
Document No. 38-12018 Rev. *J
33
[+] Feedback
CY8C24094, CY8C24794, CY8C24894, and CY8C24994 Final Data Sheet
3. Electrical Specifications
When bypassed by a capacitor on P2[4], the noise of the analog ground signal distributed to each block is reduced by a factor of up
to 5 (14 dB). This is at frequencies above the corner frequency defined by the on-chip 8.1k resistance and the external capacitor.
Figure 3-4. Typical AGND Noise with P2[4] Bypass
dBV/rtHz
10000
0
0.01
0.1
1.0
10
1000
100
0.001
0.01
0.1 Freq (kHz)
1
10
100
At low frequencies, the opamp noise is proportional to 1/f, power independent, and determined by device geometry. At high frequencies, increased power level reduces the noise spectrum level.
Figure 3-5. Typical Opamp Noise
nV/rtHz
10000
PH_BH
PH_BL
PM_BL
PL_BL
1000
100
10
0.001
February 15, 2007
0.01
0.1
Freq (kHz)
1
10
Document No. 38-12018 Rev. *J
100
34
[+] Feedback
CY8C24094, CY8C24794, CY8C24894, and CY8C24994 Final Data Sheet
3.4.5
3. Electrical Specifications
AC Low Power Comparator Specifications
The following table lists guaranteed maximum and minimum specifications for the voltage and temperature ranges: 4.75V to 5.25V
and -40°C ≤ TA ≤ 85°C, 3.0V to 3.6V and -40°C ≤ TA ≤ 85°C, or 2.4V to 3.0V and -40°C ≤ TA ≤ 85°C, respectively. Typical parameters
apply to 5V at 25°C and are for design guidance only.
Table 3-22. AC Low Power Comparator Specifications
Symbol
TRLPC
3.4.6
Description
Min
LPC response time
Typ
–
Max
–
Units
µs
50
Notes
≥ 50 mV overdrive comparator reference set
within VREFLPC.
AC Digital Block Specifications
The following table lists guaranteed maximum and minimum specifications for the voltage and temperature ranges: 4.75V to 5.25V
and -40°C ≤ TA ≤ 85°C, or 3.0V to 3.6V and -40°C ≤ TA ≤ 85°C, respectively. Typical parameters apply to 5V and 3.3V at 25°C and
are for design guidance only.
Table 3-23. AC Digital Block Specifications
Function
Timer
Counter
Dead Band
Description
Capture Pulse Width
Maximum Frequency, No Capture
Maximum Frequency, With Capture
Min
Typ
Max
Units
50
–
–
ns
–
–
49.92
MHz
–
–
25.92
MHz
Enable Pulse Width
50a
–
–
ns
Maximum Frequency, No Enable Input
–
–
49.92
MHz
Maximum Frequency, Enable Input
–
–
25.92
MHz
a
Notes
4.75V < Vdd < 5.25V.
4.75V < Vdd < 5.25V.
Kill Pulse Width:
Asynchronous Restart Mode
–
–
ns
Synchronous Restart Mode
20
a
50
–
–
ns
Disable Mode
50a
–
–
ns
–
–
49.92
MHz
4.75V < Vdd < 5.25V.
CRCPRS
Maximum Input Clock Frequency
(PRS Mode)
–
–
49.92
MHz
4.75V < Vdd < 5.25V.
CRCPRS
Maximum Input Clock Frequency
(CRC Mode)
–
–
24.6
MHz
SPIM
Maximum Input Clock Frequency
–
–
8.2
MHz
SPIS
Maximum Input Clock Frequency
–
–
4.1
MHz
Width of SS_ Negated Between Transmissions
50a
–
–
ns
Transmitter
Maximum Input Clock Frequency
–
–
24.6
MHz
Maximum data rate at 3.08 MHz due to 8 x over
clocking.
Receiver
Maximum Input Clock Frequency
–
–
24.6
MHz
Maximum data rate at 3.08 MHz due to 8 x over
clocking.
Maximum Frequency
Maximum data rate at 4.1 MHz due to 2 x over
clocking.
a. 50 ns minimum input pulse width is based on the input synchronizers running at 24 MHz (42 ns nominal period).
3.4.7
AC External Clock Specifications
The following tables list guaranteed maximum and minimum specifications for the voltage and temperature ranges: 4.75V to 5.25V
and -40°C ≤ TA ≤ 85°C, or 3.0V to 3.6V and -40°C ≤ TA ≤ 85°C, respectively. Typical parameters apply to 5V and 3.3V at 25°C and
are for design guidance only.
Table 3-24. AC External Clock Specifications
Symbol
Description
Min
Typ
Max
Units
FOSCEXT
Frequency for USB Applications
23.94
24
24.06
–
Duty Cycle
47
50
53
%
–
Power up to IMO Switch
150
–
–
µs
February 15, 2007
Document No. 38-12018 Rev. *J
Notes
MHz
35
[+] Feedback
CY8C24094, CY8C24794, CY8C24894, and CY8C24994 Final Data Sheet
3.4.8
3. Electrical Specifications
AC Analog Output Buffer Specifications
The following tables list guaranteed maximum and minimum specifications for the voltage and temperature ranges: 4.75V to 5.25V
and -40°C ≤ TA ≤ 85°C, or 3.0V to 3.6V and -40°C ≤ TA ≤ 85°C, respectively. Typical parameters apply to 5V and 3.3V at 25°C and
are for design guidance only.
Table 3-25. 5V AC Analog Output Buffer Specifications
Symbol
TROB
TSOB
SRROB
SRFOB
BWOBSS
BWOBLS
Description
Min
Typ
Max
Units
Notes
Rising Settling Time to 0.1%, 1V Step, 100pF Load
Power = Low
–
–
2.5
µs
Power = High
–
–
2.5
µs
Power = Low
–
–
2.2
µs
Power = High
–
–
2.2
µs
Power = Low
0.65
–
–
V/µs
Power = High
0.65
–
–
V/µs
Power = Low
0.65
–
–
V/µs
Power = High
0.65
–
–
V/µs
Power = Low
0.8
–
–
MHz
Power = High
0.8
–
–
MHz
Power = Low
300
–
–
kHz
Power = High
300
–
–
kHz
Falling Settling Time to 0.1%, 1V Step, 100pF Load
Rising Slew Rate (20% to 80%), 1V Step, 100pF Load
Falling Slew Rate (80% to 20%), 1V Step, 100pF Load
Small Signal Bandwidth, 20mVpp, 3dB BW, 100pF Load
Large Signal Bandwidth, 1Vpp, 3dB BW, 100pF Load
Table 3-26. 3.3V AC Analog Output Buffer Specifications
Symbol
TROB
TSOB
SRROB
SRFOB
BWOBSS
BWOBLS
Description
Min
Typ
Max
Units
Notes
Rising Settling Time to 0.1%, 1V Step, 100pF Load
Power = Low
–
–
3.8
µs
Power = High
–
–
3.8
µs
Power = Low
–
–
2.6
µs
Power = High
–
–
2.6
µs
Power = Low
0.5
–
–
V/µs
Power = High
0.5
–
–
V/µs
Power = Low
0.5
–
–
V/µs
Power = High
0.5
–
–
V/µs
Power = Low
0.7
–
–
MHz
Power = High
0.7
–
–
MHz
Power = Low
200
–
–
kHz
Power = High
200
–
–
kHz
Falling Settling Time to 0.1%, 1V Step, 100pF Load
Rising Slew Rate (20% to 80%), 1V Step, 100pF Load
Falling Slew Rate (80% to 20%), 1V Step, 100pF Load
Small Signal Bandwidth, 20mVpp, 3dB BW, 100pF Load
Large Signal Bandwidth, 1Vpp, 3dB BW, 100pF Load
February 15, 2007
Document No. 38-12018 Rev. *J
36
[+] Feedback
CY8C24094, CY8C24794, CY8C24894, and CY8C24994 Final Data Sheet
3.4.9
3. Electrical Specifications
AC Programming Specifications
The following table lists guaranteed maximum and minimum specifications for the voltage and temperature ranges: 4.75V to 5.25V
and -40°C ≤ TA ≤ 85°C, or 3.0V to 3.6V and -40°C ≤ TA ≤ 85°C, respectively. Typical parameters apply to 5V and 3.3V at 25°C and
are for design guidance only.
Table 3-27. AC Programming Specifications
Symbol
Description
Min
Typ
Max
Units
Notes
TRSCLK
Rise Time of SCLK
1
–
20
ns
TFSCLK
Fall Time of SCLK
1
–
20
ns
TSSCLK
Data Set up Time to Falling Edge of SCLK
40
–
–
ns
THSCLK
Data Hold Time from Falling Edge of SCLK
40
–
–
ns
FSCLK
Frequency of SCLK
0
–
8
MHz
TERASEB
Flash Erase Time (Block)
–
10
–
ms
TWRITE
Flash Block Write Time
–
30
–
ms
TDSCLK
Data Out Delay from Falling Edge of SCLK
–
–
45
ns
Vdd > 3.6
TDSCLK3
Data Out Delay from Falling Edge of SCLK
–
–
50
ns
3.0 ≤ Vdd ≤ 3.6
February 15, 2007
Document No. 38-12018 Rev. *J
37
[+] Feedback
CY8C24094, CY8C24794, CY8C24894, and CY8C24994 Final Data Sheet
3.4.10
3. Electrical Specifications
AC I2C Specifications
The following table lists guaranteed maximum and minimum specifications for the voltage and temperature ranges: 4.75V to 5.25V
and -40°C ≤ TA ≤ 85°C, or 3.0V to 3.6V and -40°C ≤ TA ≤ 85°C, respectively. Typical parameters apply to 5V and 3.3V at 25°C and
are for design guidance only.
Table 3-28. AC Characteristics of the I2C SDA and SCL Pins for Vdd
Standard Mode
Symbol
Description
Min
Fast Mode
Max
Min
Max
Units
FSCLI2C
SCL Clock Frequency
0
100
0
400
kHz
THDSTAI2C
Hold Time (repeated) START Condition. After this period,
the first clock pulse is generated.
4.0
–
0.6
–
µs
TLOWI2C
LOW Period of the SCL Clock
4.7
–
1.3
–
µs
THIGHI2C
HIGH Period of the SCL Clock
4.0
–
0.6
–
µs
TSUSTAI2C
Set-up Time for a Repeated START Condition
4.7
–
0.6
–
µs
THDDATI2C
Data Hold Time
0
–
0
–
µs
TSUDATI2C
Data Set-up Time
250
–
100
–
ns
TSUSTOI2C
Set-up Time for STOP Condition
4.0
–
0.6
–
µs
TBUFI2C
Bus Free Time Between a STOP and START Condition
4.7
–
1.3
–
µs
TSPI2C
Pulse Width of spikes are suppressed by the input filter.
–
–
0
50
ns
a
Notes
a. A Fast-Mode I2C-bus device can be used in a Standard-Mode I2C-bus system, but the requirement tSU;DAT ≥ 250 ns must then be met. This will automatically be the case if
the device does not stretch the LOW period of the SCL signal. If such device does stretch the LOW period of the SCL signal, it must output the next data bit to the SDA line
trmax + tSU;DAT = 1000 + 250 = 1250 ns (according to the Standard-Mode I2C-bus specification) before the SCL line is released.
Figure 3-6. Definition for Timing for Fast/Standard Mode on the I2C Bus
SDA
TLOWI2C
TSUDATI2C
THDSTAI2C
TSPI2C
TBUFI2C
SCL
S THDSTAI2C THDDATI2C THIGHI2C
February 15, 2007
TSUSTAI2C
Sr
Document No. 38-12018 Rev. *J
TSUSTOI2C
P
S
38
[+] Feedback
4. Packaging Information
This chapter illustrates the package specification for the CY8C24x94 PSoC devices, along with the thermal impedance for the package and solder reflow peak temperatures.
Important Note Emulation tools may require a larger area on the target PCB than the chip’s footprint. For a detailed description of
the emulation tools’ dimensions, refer to the document titled PSoC Emulator Pod Dimensions at
http://www.cypress.com/design/MR10161.
4.1
Packaging Dimensions
Figure 4-1. 56-Lead (8x8 mm) QFN
001-12921 **
February 15, 2007
Document No. 38-12018 Rev. *J
39
[+] Feedback
CY8C24094, CY8C24794, CY8C24894, and CY8C24994 Final Data Sheet
4. Packaging Information
Figure 4-2. 68-Lead (8x8 mm x 0.89 mm) QFN
51-85214 *C
Important Note For information on the preferred dimensions for mounting QFN packages, see the following Application Note at
http://www.amkor.com/products/notes_papers/MLFAppNote.pdf.
Important Note Pinned vias for thermal conduction are not required for the low-power PSoC device.
February 15, 2007
Document No. 38-12018 Rev. *J
40
[+] Feedback
CY8C24094, CY8C24794, CY8C24894, and CY8C24994 Final Data Sheet
4. Packaging Information
Figure 4-3. 100-Ball (6x6 mm) VFBGA
51-85209 *B
Figure 4-4. 100-Lead (14x14 x 1.4 mm) TQFP
51-85048 *C
February 15, 2007
Document No. 38-12018 Rev. *J
41
[+] Feedback
CY8C24094, CY8C24794, CY8C24894, and CY8C24994 Final Data Sheet
4.2
4. Packaging Information
Thermal Impedance
Table 4-1. Thermal Impedance for the Package
Package
Typical θJA *
56 QFN**
12.93 oC/W
68 QFN**
13.05 oC/W
100 VFBGA
65 oC/W
* TJ = TA + POWER x θJA
** To achieve the thermal impedance specified for the QFN package, the center
thermal pad should be soldered to the PCB ground plane.
4.3
Solder Reflow Peak Temperature
Following is the minimum solder reflow peak temperature to achieve good solderability.
Table 4-2. Solder Reflow Peak Temperature
Package
Minimum Peak Temperature*
Maximum Peak Temperature
56 QFN
240oC
260oC
68 QFN
240 C
260oC
100 VFBGA
240oC
260oC
o
*Higher temperatures may be required based on the solder melting point. Typical temperatures for solder are 220 ± 5oC
with Sn-Pb or 245 ± 5oC with Sn-Ag-Cu paste. Refer to the solder manufacturer specifications.
February 15, 2007
Document No. 38-12018 Rev. *J
42
[+] Feedback
5. Development Tool Selection
This chapter presents the development tools available for all current PSoC device families including the CY8C24x94 family.
5.1
5.1.1
Software
5.2
All development kits can be purchased from the Cypress Online
Store.
PSoC Designer™
At the core of the PSoC development software suite is PSoC
Designer. Utilized by thousands of PSoC developers, this
robust software has been facilitating PSoC designs for half a
decade. PSoC Designer is available free of charge at http://
www.cypress.com under DESIGN RESOURCES >> Software
and Drivers.
5.1.2
Development Kits
PSoC Express™
As the newest addition to the PSoC development software
suite, PSoC Express is the first visual embedded system design
tool that allows a user to create an entire PSoC project and
generate a schematic, BOM, and data sheet without writing a
single line of code. Users work directly with application objects
such as LEDs, switches, sensors, and fans. PSoC Express is
available free of charge at http://www.cypress.com/psocexpress.
5.2.1
CY3215-DK Basic Development Kit
The CY3215-DK is for prototyping and development with PSoC
Designer. This kit supports in-circuit emulation and the software
interface allows users to run, halt, and single step the processor
and view the content of specific memory locations. Advance
emulation features also supported through PSoC Designer. The
kit includes:
■ PSoC Designer Software CD
■ ICE-Cube In-Circuit Emulator
■ ICE Flex-Pod for CY8C29x66 Family
■ Cat-5 Adapter
■ Mini-Eval Programming Board
■ 110 ~ 240V Power Supply, Euro-Plug Adapter
■ iMAGEcraft C Compiler (Registration Required)
■ ISSP Cable
5.1.3
PSoC Programmer
■ USB 2.0 Cable and Blue Cat-5 Cable
Flexible enough to be used on the bench in development, yet
suitable for factory programming, PSoC Programmer works
either as a standalone programming application or it can operate directly from PSoC Designer or PSoC Express. PSoC Programmer software is compatible with both PSoC ICE-Cube InCircuit Emulator and PSoC MiniProg. PSoC programmer is
available free ofcharge at http://www.cypress.com/psocprogrammer.
5.1.4
■ 2 CY8C29466-24PXI 28-PDIP Chip Samples
CY3202-C iMAGEcraft C Compiler
CY3202 is the optional upgrade to PSoC Designer that enables
the iMAGEcraft C compiler. It can be purchased from the
Cypress Online Store. At http://www.cypress.com, click the
Online Store shopping cart icon at the bottom of the web page,
and click PSoC (Programmable System-on-Chip) to view a current list of available items..
February 15, 2007
Document No. 38-12018 Rev. *J
43
[+] Feedback
CY8C24094, CY8C24794, CY8C24894, and CY8C24994 Final Data Sheet
5.2.2
CY3210-ExpressDK PSoC Express
Development Kit
The CY3210-ExpressDK is for advanced prototyping and development with PSoC Express (may be used with ICE-Cube In-Circuit Emulator). It provides access to I2C buses, voltage
reference, switches, upgradeable modules and more. The kit
includes:
■ PSoC Express Software CD
5. Development Tool Selection
5.3.3
CY3214-PSoCEvalUSB
The CY3214-PSoCEvalUSB evaluation kit features a development board for the CY8C24794-24LFXI PSoC device. Special
features of the board include both USB and capacitive sensing
development and debugging support. This evaluation board
also includes an LCD module, potentiometer, LEDs, an enunciator and plenty of bread boarding space to meet all of your evaluation needs. The kit includes:
■ PSoCEvalUSB Board
■ Express Development Board
■ LCD Module
■ 4 Fan Modules
■ MIniProg Programming Unit
■ 2 Proto Modules
■ Mini USB Cable
■ MiniProg In-System Serial Programmer
■ PSoC Designer and Example Projects CD
■ MiniEval PCB Evaluation Board
■ Getting Started Guide
■ Jumper Wire Kit
■ Wire Pack
■ USB 2.0 Cable
■ Serial Cable (DB9)
5.4
■ 110 ~ 240V Power Supply, Euro-Plug Adapter
■ 2 CY8C24423A-24PXI 28-PDIP Chip Samples
Device Programmers
All device programmers can be purchased from the Cypress
Online Store.
■ 2 CY8C27443-24PXI 28-PDIP Chip Samples
■ 2 CY8C29466-24PXI 28-PDIP Chip Samples
5.4.1
5.3
Evaluation Tools
All evaluation tools can be purchased from the Cypress Online
Store.
5.3.1
The CY3216 Modular Programmer kit features a modular programmer and the MiniProg1 programming unit. The modular
programmer includes three programming module cards and
supports multiple Cypress products. The kit includes:
■ Modular Programmer Base
CY3210-MiniProg1
■ 3 Programming Module Cards
The CY3210-MiniProg1 kit allows a user to program PSoC
devices via the MiniProg1 programming unit. The MiniProg is a
small, compact prototyping programmer that connects to the PC
via a provided USB 2.0 cable. The kit includes:
■ MiniProg Programming Unit
■ MiniEval Socket Programming and Evaluation Board
■ 28-Pin CY8C29466-24PXI PDIP PSoC Device Sample
■ 28-Pin CY8C27443-24PXI PDIP PSoC Device Sample
■ MiniProg Programming Unit
■ PSoC Designer Software CD
■ Getting Started Guide
■ USB 2.0 Cable
5.4.2
CY3207ISSP In-System Serial
Programmer (ISSP)
The CY3207ISSP is a production programmer. It includes protection circuitry and an industrial case that is more robust than
the MiniProg in a production-programming environment.
Note: CY3207ISSP needs special software and is not compatible with PSoC Programmer. The kit includes:
■ PSoC Designer Software CD
■ Getting Started Guide
■ USB 2.0 Cable
5.3.2
CY3216 Modular Programmer
CY3210-PSoCEval1
■ CY3207 Programmer Unit
The CY3210-PSoCEval1 kit features an evaluation board and
the MiniProg1 programming unit. The evaluation board includes
an LCD module, potentiometer, LEDs, and plenty of breadboarding space to meet all of your evaluation needs. The kit
includes:
■ PSoC ISSP Software CD
■ 110 ~ 240V Power Supply, Euro-Plug Adapter
■ USB 2.0 Cable
■ Evaluation Board with LCD Module
■ MiniProg Programming Unit
■ 28-Pin CY8C29466-24PXI PDIP PSoC Device Sample (2)
■ PSoC Designer Software CD
■ Getting Started Guide
■ USB 2.0 Cable
February 15, 2007
Document No. 38-12018 Rev. *J
44
[+] Feedback
CY8C24094, CY8C24794, CY8C24894, and CY8C24994 Final Data Sheet
5.5
5. Development Tool Selection
Accessories (Emulation and
Programming)
Table 5-1. Emulation and Programming Accessories
Part #
Pin
Package
Flex-Pod Kita
Foot Kitb
Adapterc
CY8C24794
-24LFXI
56 QFN
CY325024X94QFN
CY325056QFN-FK
AS-56-28
CY8C24894
-24LFXI
56 QFN
CY325024X94QFN
CY325056QFN-FK
AS-28-28-02SS6ENG-GANG
a. Flex-Pod kit includes a practice flex-pod and a practice PCB, in addition to two
flex-pods.
b. Foot kit includes surface mount feet that can be soldered to the target PCB.
c. Programming adapter converts non-DIP package to DIP footprint. Specific
details and ordering information for each of the adapters can be found at
http://www.emulation.com.
5.6
3rd-Party Tools
Several tools have been specially designed by the following
3rd-party vendors to accompany PSoC devices during development and production. Specific details for each of these tools can
be found at http://www.cypress.com under DESIGN
RESOURCES >> Evaluation Boards.
5.7
Build a PSoC Emulator into
Your Board
For details on how to emulate your circuit before going to volume production using an on-chip debug (OCD) non-production
PSoC device, see Application Note “Debugging - Build a PSoC
Emulator into Your Board - AN2323” at http://www.cypress.com/
an2323.
February 15, 2007
Document No. 38-12018 Rev. *J
45
[+] Feedback
6. Ordering Information
The following table lists the CY8C24x94 PSoC device’s key package features and ordering codes.
SRAM
(Bytes)
Temperature
Range
Digital Blocks
Analog Blocks
Digital IO Pins
Analog Inputs
Analog Outputs
XRES Pin
CY8C24794-24LFXI
16K
1K
-40C to +85C
4
6
50
48
2
No
56 Pin (8x8 mm) QFN
(Tape and Reel)
CY8C24794-24LFXIT
16K
1K
-40C to +85C
4
6
50
48
2
No
56 Pin (8x8 mm) QFN
CY8C24894-24LFXI
16K
1K
-40C to +85C
4
6
49
47
2
Yes
56 Pin (8x8 mm) QFN
(Tape and Reel)
CY8C24894-24LFXIT
16K
1K
-40C to +85C
4
6
49
47
2
Yes
68 Pin OCD (8x8 mm) QFNa
CY8C24094-24LFXI
16K
1K
-40C to +85C
4
6
56
48
2
Yes
68 Pin (8x8 mm) QFN
CY8C24994-24LFXI
16K
1K
-40C to +85C
4
6
56
48
2
Yes
68 Pin (8x8 mm) QFN
(Tape and Reel)
CY8C24994-24LFXIT
16K
1K
-40C to +85C
4
6
56
48
2
Yes
100 Ball OCD (6x6 mm) VFBGAa
CY8C24094-24BVXI
16K
1K
-40C to +85C
4
6
56
48
2
Yes
100 Ball (6x6 mm) VFBGA
CY8C24994-24BVXI
16K
1K
-40C to +85C
4
6
56
48
2
Yes
CY8C24094-24AXI
16K
1K
-40C to +85C
4
6
56
48
2
Yes
100 Pin OCD
TQFPa
Ordering
Code
56 Pin (8x8 mm) QFN
Package
Flash
(Bytes)
Table 6-1. CY8C24x94 PSoC Device’s Key Features and Ordering Information
a. This part may be used for in-circuit debugging. It is NOT available for production.
6.1
Ordering Code Definitions
CY 8 C 24 xxx-SPxx
Package Type:
Thermal Rating:
PX = PDIP Pb-Free
C = Commercial
SX = SOIC Pb-Free
I = Industrial
PVX = SSOP Pb-Free
E = Extended
LFX/LKX = QFN Pb-Free
AX = TQFP Pb-Free
BVX = VFBGA Pb-Free
Speed: 24 MHz
Part Number
Family Code
Technology Code: C = CMOS
Marketing Code: 8 = Cypress PSoC
Company ID: CY = Cypress
February 15, 2007
Document No. 38-12018 Rev. *J
46
[+] Feedback
7. Sales and Company Information
To obtain information about Cypress Semiconductor or PSoC sales and technical support, reference the following information.
Cypress Semiconductor
198 Champion Court
San Jose, CA 95134
408.943.2600
Web Sites:
7.1
Company Information – http://www.cypress.com
Sales – http://www.cypress.com/aboutus/sales_locations.cfm
Technical Support – http://www.cypress.com/support/login.cfm
Revision History
Table 6-1. CY8C24x94 Data Sheet Revision History
Document Title:
CY8C24094, CY8C24794, CY8C24894 and CY8C24994 PSoC® Mixed-Signal Array Final Data Sheet
Document Number: 38-12018
Revision
ECN #
Issue Date
Origin of Change
Description of Change
**
133189
01.27.2004 NWJ
New silicon and new document – Advance Data Sheet.
*A
251672
See ECN
SFV
First Preliminary Data Sheet. Changed title to encompass only the CY8C24794 because the CY8C24494 and
CY8C24694 are not being offered by Cypress MicroSystems.
*B
289742
See ECN
HMT
Add standard DS items from SFV memo. Add Analog Input Mux on pinouts. 2 MACs. Change 512 bytes of
SRAM to 1K. Add dimension key to package. Remove HAPI. Update diagrams, registers and specs.
*C
335236
See ECN
HMT
Add CY logo. Update CY copyright. Update new CY.com URLs. Re-add ISSP programming pinout notation.
Add Reflow Temp. table. Update features (MAC, Oscillator, and voltage range), registers (INT_CLR2/MSK2,
second MAC), and specs. (Rext, IMO, analog output buffer...).
*D
344318
See ECN
HMT
Add new color and logo. Expand analog arch. diagram. Fix IO #. Update Electrical Specifications.
*E
346774
See ECN
HMT
Add USB temperature specifications. Make data sheet Final.
*F
349566
See ECN
HMT
Remove USB logo. Add URL to preferred dimensions for mounting MLF packages.
*G
393164
See ECN
HMT
Add new device, CY8C24894 56-pin MLF with XRES pin. Add Fimousb3v char. to specs. Upgrade to CY Perform logo and update corporate address and copyright.
*H
469243
See ECN
HMT
Add ISSP note to pinout tables. Update typical and recommended Storage Temperature per industrial specs.
Update Low Output Level maximum IOL budget. Add FLS_PR1 to Register Map Bank 1 for users to specify
which Flash bank should be used for SROM operations. Add two new devices for a 68-pin QFN and 100-ball
VFBGA under RPNs: CY8C24094 and CY8C24994. Add two packages for 68-pin QFN. Add OCD non-production pinouts and package diagrams. Update CY branding and QFN convention. Add new Dev. Tool section.
Update copyright and trademarks.
*I
561158
See ECN
HMT
Add Low Power Comparator (LPC) AC/DC electrical spec. tables. Add CY8C20x34 to PSoC Device Characteristics table. Add detailed dimensions to 56-pin QFN package diagram and update revision. Secure one package
diagram/manufacturing per QFN. Update emulation pod/feet kit part numbers. Fix pinout type-o per TestTrack.
*J
728238
See ECN
HMT
Add CapSense SNR requirement reference. Update figure standards. Update Technical Training paragraphs.
Add QFN package clarifications and dimensions. Update ECN-ed Amkor dimensioned QFN package diagram
revisions. Reword SNR reference. Add new 56-pin QFN spec.
Distribution: External/Public
February 15, 2007
Posting: None
© Cypress Semiconductor 2004-2007 — Document No. 38-12018 Rev. *J
47
[+] Feedback
CY8C24094, CY8C24794, CY8C24894, and CY8C24994 Final Data Sheet
7.2
7. Sales and Company Information
Copyrights and Code Protection
© Cypress Semiconductor Corporation. 2004-2007. All rights reserved. PSoC Designer™, Programmable System-on-Chip™, and PSoC Express™ are trademarks and
PSoC® is a registered trademark of Cypress Semiconductor Corp. All other trademarks or registered trademarks referenced herein are property of the respective corporations.
The information contained herein is subject to change without notice. Cypress Semiconductor assumes no responsibility for the use of any circuitry other than circuitry
embodied in a Cypress Semiconductor product. Nor does it convey or imply any license under patent or other rights. Cypress Semiconductor does not authorize its products
for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of
Cypress Semiconductor products in life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress
Semiconductor against all charges. Cypress Semiconductor products are not warranted nor intended to be used for medical, life-support, life-saving, critical control or safety
applications, unless pursuant to an express written agreement with Cypress Semiconductor.
Note the following details of the Flash code protection features on Cypress Semiconductor PSoC devices.
Cypress Semiconductor products meet the specifications contained in their particular Cypress Semiconductor Data Sheets. Cypress Semiconductor believes that its family of products is one of the most secure families of its kind on the market today, regardless of how they are used. There may be methods, unknown to Cypress Semiconductor, that can breach the code protection features. Any of these methods, to our knowledge, would be dishonest and possibly illegal. Neither Cypress Semiconductor
nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not mean that we are guaranteeing the product as "unbreakable." Cypress Semiconductor is willing to work with the customer who is concerned about the integrity of their code. Code protection is constantly evolving. We at
Cypress Semiconductor are committed to continuously improving the code protection features of our products.
February 15, 2007
Document No. 38-12018 Rev. *J
48
[+] Feedback