3.0x2.0mm SURFACE MOUNT LED LAMP AA3020MBCK BLUE Description The Blue source color devices are made with GaN Features l 3.0mm X 2.0mm, 1.4mm HIGH, ONLY MINIMUM SPACE REQUIRED. lSUITABLE FOR COMPACT OPTOELECTRONIC APPLICATIONS. lLOW POWER CONSUMPTION. l PACKAGE : 2000PCS / REEL. on SiC Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti- electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches), 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAD1222 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: MAR/24/2003 DRAWN: Z.Y.YANG PAGE: 1 OF 4 Selection Guide P ar t N o . Dic e AA3020MBC K Iv (m c d ) @ 20 m A L en s Ty p e BLUE(GaN) WATER C LEAR V i ew i n g An g le Mi n . Ty p . Un its Tes t C o n d i t i o n s 2.6 7 2θ1/2 90° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°°C Sy m b o l P ar am et er λp e a k Peak Wavelength Blue 430 nm I F =20mA λD D omi nate Wavelength Blue 466 nm I F =20mA Spectral Li ne Half-wi dth Blue 60 nm I F =20mA pF VF=0V;f=1MHz 4.5 V I F =20mA 10 uA V R = 5V ∆λ1/2 D ev i c e Ty p . C C apaci tance Blue 100 VF Forward Voltage Blue 4.0 IR Reverse C urrent Blue Max . Absolute Maximum Ratings at TA=25°°C P ar am et er B lu e Un its Power di ssi pati on 105 mW Peak Forward C urrent [1] 150 mA D C Forward C urrent 30 Reverse Voltage 5 Operati ng /Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAD1222 APPROVED: J. Lu mA REV NO: V.1 CHECKED: Allen Liu -40°C To +85°C DATE: MAR/24/2003 DRAWN: Z.Y.YANG V PAGE: 2 OF 4 Blue SPEC NO: DSAD1222 APPROVED: J. Lu AA3020MBCK REV NO: V.1 CHECKED: Allen Liu DATE: MAR/24/2003 DRAWN: Z.Y.YANG PAGE: 3 OF 4 AA3020MBCK SMT Reflow Soldering Instruction Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: DSAD1222 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: MAR/24/2003 DRAWN: Z.Y.YANG PAGE: 4 OF 4