TOTAL-POWER TPVP93

TOTAL POWER INT'L
UNIVERSAL INPUT HARMONIC CORRECTION AC-DC OPEN
FRAME SINGLE & MULTIPLE OUTPUT 50-100 WATTS
INTERNAL SWITCHING POWER SUPPLIES TPVP93 SERIES
FEATURES:
ACCOMMODATE UNIVERSAL AC SOURCES
MEET IEC1000-3-2 HARMONIC CORRECTION
MEET UNIVERSAL SAFETY STANDARDS
EMI MEET CISPR PUB. 22 CLASS B
CE MARKING COMPLIANCE
SPECIFICATION
INPUT SPECIFICATION
OUTPUT SPECIFICATION
Input Voltage: Typ. 90-264Vac with PFC.
Input Connector: Molex V-M connector.
Input Frequency: 47-63Hz.
Inrush Current: Typ. 23A @230Vac.
Input Current: Typ. 1.5A@115Vac, 0.8A@230Vac.
Dielectric Withstand: Meet IEC950.
EMI: Meet CISPR PUB.22 Class B.
Hold-up Time: Typ. 43mS @ 115Vac & 230Vac.
Over Temp. Protection (OTP): Optional for
U-Bracket format.
Power Factor Correction: Meet Harmonic Correction
per IEC1000-3-2.PF typ.0.98-0.99.
Earth Leakage: Less than 0.63mA.
Overload Protection (OLP): Fully protected against output
overload and short circuit.
Consult the factory for OLP setting.
Output Voltage: See Ratings Chart.
Output Current: See Ratings Chart.
Output Connector: Molex V-M connector.
Output Wattage: Typ. 50 Watts. convection.
Max. 93 Watts under forced air flow.
Line Regulation: Typ. 0.1-0.5%.
Load Regulation: Main VO1: typ. ±1-2.0%.
Aux. VO2: typ. ±3-5.0% (Stacked on).
VO2: typ. ±2-3.0% (P.R.).
Aux. VO3: typ. ±2-3.0% (P.R.).
Noise & Ripple: Typ. 1% peak to peak.
OVP: Installed in main VO1 only.
Adjustability: Available at main VO1.
OR-ing Diodes: Installed in VO1 & VO2.
GENERAL SPECIFICATION
Efficiency: Typ. 75%.
Switching Frequency: Fixed freq. at 65K Hz.
Circuit Topology: PWM Fixed-frequency Forward Circuit.
Transient Response: Output voltage returns in
less than 0.5mS following
a 25% load change.
Safety Standard: UL1950/ EN60950 Class I.
Power Density: 2.5-5.0 Watts / Cubic Inch PCB format.
1.7- 3.37 Watts / Cubic Inch U-Bracket format.
Operating Temperature: 0 to +50°C at full load and
30 cfm forced air flow for full load.
Storage Temperature: -20 to +85°C.
Temperature Coefficient: Typ. 0.04% /°C.
Cooling: At least 20 cfm forced cooling air is required
for 90 watts and up load
Construction: PCB or U-bracket open frame format.
TOTAL POWER INT'L Tel: 877-646-0900 Fax: 978-453-7395
Email: [email protected] http://www.total-power.com
-1-
OUTPUT VOLTAGE / CURRENT RATINGS CHART
DUAL OUTPUT
SINGLE OUTPUT
MAIN VO1
MODEL NO.
ConvectCooling
TPVP93-S033250
12.0A
TPVP93-S050200
10.0A
TPVP93-S120085
@⊙
MAIN VO1
@⊙
AUX. VO2 ⊙■ or ●
30cfm air
cooling
MODEL NO.
3.3V
25.0A
TPVP93-D050I
6.0A
+5.0V
10.0A
2.0A
+12.0V
4.0A
5.0V
20.0A
TPVP93-D050K
6.0A
+5.0V
10.0A
1.6A
+15.0V
3.2A
4.2A
12.0V
8.5A
TPVP93-D050M
6.0A
+5.0V
10.0A
1.0A
+24.0V
2.0A
TPVP93-S150068
3.4A
15.0V
6.8A
TPVP93-D033I
8.0A
+3.3V
12.0A
2.0A
+12.0V
4.0A
TPVP93-S240043
2.1A
24.0V
4.3A
TPVP93-D033K
8.0A
+3.3V
12.0A
1.6A
+15.0V
3.2A
TPVP93-S280038
1.8A
28.0V
3.8A
TPVP93-D033M
8.0A
+3.3V
12.0A
1.0A
+24.0V
2.0A
TPVP93-S360030
1.5A
36.0V
3.0A
TPVP93-S480022
1.2A
48.0V
2.2A
Volt.
ConvectCooling
30cfm air
cooling
Volt.
ConvectCooling
Volt.
30cfm air
cooling
TRIPLE OUTPUT
MAIN VO1 @⊙
MODEL NO.
ConvectCooling
Volt.
4.0A
TPVP93-T050II
+5.0V
AUX. VO2 ⊙● or ■
30cfm air Convectcooling
Cooling
10.0A
1.5A
30cfm air
cooling
Volt.
+12.0V
AUX. VO3 ●
ConvectCooling
3.0A
30cfm air
cooling
Volt.
1.0A -12.0V
1.5A
TPVP93-T050IE
4.0A
+5.0V
10.0A
1.5A
+12.0V
3.0A
1.0A
-5.0V
1.5A
TPVP93-T050MI
4.0A
+5.0V
10.0A
0.8A
+24.0V
1.5A
1.0A -12.0V
1.5A
TPVP93-T050KK
4.0A
+5.0V
10.0A
1.2A
+15.0V
2.4A
0.8A -15.0V
1.2A
TPVP93-T033II
5.0A
+3.3V
12.0A
1.5A
+12.0V
3.0A
1.0A -12.0V
1.5A
TPVP93-T033KK
5.0A
+3.3V
12.0A
1.2A
+15.0V
2.0A
0.8A -15.0V
1.2A
Symbol: "★" OVP built-in "@" Adjustable "#" Remote sensing "●" Post Regulator "■" couple common choke
"⊙" Installed with OR-ing diodes.
MECHANICAL DIMENSIONS: MM [INCHES]
WEIGHT: PCB 358.0g(12.6 Oz.)
U-Bracket 541.0g(19.0 Oz.)
U-Bracket
PCB
INPUT & OUTPUT CONNECTORS PIN ASSIGNMENT
AC INPUT
INPUT & OUTPUT CONNECTORS PIN ASSIGNMENT
DUAL OUTPUT
ASSIGNMENT
AC-L
AC-N
AC-G
VO1
VO2
CNTR & PIN
L
N
GND
P2-7,8
P2-1
Mating connector: Molex 5195 or 5239 series
DC
COM
P2-2,3,
4,5,6
AC INPUT
ASSIGNMENT
CNTR & PIN
AC-L AC-N AC-G
P1-L
P1-N
G
DUAL OUTPUT
TRIPLE OUTPUT
DC
DC
VO1 VO2 VO3
VO2
COM
COM
P2-3,
P2-4,
P2-1,2 P2-6,7
P2-2,3 P2-7 P2-1
4,5
5,6
VO1
Mating connector: Molex 5195 or 5239 series
TOTAL POWER INT'L Tel: 877-646-0900 Fax: 978-453-7395
Email: [email protected] http://www.total-power.com
-2-