TOTAL POWER INT'L UNIVERSAL INPUT HARMONIC CORRECTION AC-DC OPEN FRAME SINGLE OUTPUT 100 WATTS INTERNAL SWITCHING POWER SUPPLIES TPVP103 SERIES FEATURES: 5" X 3" X 1" COMPACT SIZE & HIGH POWER DENSITY ACCOMMODATE UNIVERSAL AC SOURCES MEET IEC1000-3-2 HARMONIC CORRECTION (PFC) MEET UNIVERSAL SAFETY STANDARDS EMI MEET EN55022 & FCC CLASS B CE MARKING COMPLIANCE SPECIFICATION INPUT SPECIFICATION OUTPUT SPECIFICATION Input Voltage: Typ. 90-264Vac with PFC. Output Voltage: See Ratings Chart. Output Current: See Ratings Chart. Output Power: 100W continuous. Various with output voltage & under forced air cooling. Output Connector: V-M Molex 0.156” connector for <12A output. M-T Mini Terminal Block for ≥12A output. Line Regulation: Typ. 0.1%. Load Regulation: Typ. ± 1.0%. Noise & Ripple: Typ. 1.0% peak to peak. OVP: Built-in. Adjustability: Available. Remote Sensing: Available. Overload Protection (OLP): Fully protect against output overload & short circuit. Consult the factory for OLP setting. Input Connector: V-M connector & GND tag. Input Frequency: 47-63Hz. Inrush Current: Typ. 26A @ 230Vac. Input Current: Typ. 1.0A @115Vac, 0.5A @230Vac. Dielectric Withstand: Meet IEC950. EMI: Meet EN55022 & FCC Class B. Hold-up Time: Typ. 25mS @115Vac & 230Vac. Power Factor & Harmonic Correction: Meet IEC1000-3-2, PF typ. 0.97-0.99 @ full load. Turn-on Delay/Rise Time: 2 Sec./5mS. Earth Leakage: Less than 0.5mA @230Vac. GENERAL SPECIFICATION Efficiency: Typ. 75-84%. various with output voltage. Switching Frequency: PWM 175K Hz. (PFC: 75K Hz.) Circuit Topology: Fixed Frequency Forward Circuit. Transient Response: 0.5mS following 25% load change. Safety Standard: IEC950/ UL1950 Class I. Power Density: 6.73 Watts / Cubic Inch. Operating Temperature: 0 to +50°C under 20 cfm forced air cooling for full load. Storage Temperature\Humidity: -20 to +85°C, 95% non-condensing. Temperature Coefficient: ±0.04% /°C. Cooling: At least 20cfm moving air is required to achieve full rating power, ≥+50°C in a confined area. Construction: L-bracket format. Note: All measurements are at nominal input, full load, and +25°C unless otherwise specified. TOTAL POWER, INT. Tel: 877-646-0900 Fax: 978-453-7395 Email: [email protected] http://www.total-power.com -1- MODEL NO. DESCRIPTION: TPVP103 - X X X Y Y Y Remark: Please specify the V/A rating and consult for Model No. OUTPUT CURRENT OUTPUT VOLTAGE SERIES NO. OUTPUT VOLTAGE / CURRENT RATINGS CHART DEFINED OUTPUT VOLTAGE (Vdc) 3.3 Vdc ≤Any Voltage ≤12.0 Vdc 12.0Vdc<Any Voltage ≤24.0 Vdc OUPUT VOLTAGE (Vdc) / CURRENT (A) 3.3-5.0Vdc/ 20.0-18.0A, 5.1-6.0Vdc/ 17.8-15.0A, 6.1-8.0Vdc/ 14.8-11.0A, 8.1-10.0Vdc/ 10.9-9.5A, 10.1-10.9Vdc/ 9.4-9.0A, 11.0-12.0Vdc/ 9.0-8.5A. 12.1-14.0Vdc/8.4-7.3A, 14.1-16.0Vdc/7.3-6.4A, 16.1-18.0Vdc/6.3-5.7A, 18.1-20.0Vdc/5.6-5.1A, 20.1-22.0Vdc/5.1-4.6A, 22.1-24.0Vdc/4.6-4.2A SINGLE OUTPUT (Model No. for example) MODEL NO. TPVP103-033200 TPVP103-050180 TPVP103-120085 TPVP103-150068 TPVP103-240042 Min. 0.8A 0.6A 0.0A 0.5A 0.3A MAIN O/P VO1 ★@# Typ. Volt. 20.0A 3.3V 18.0A 5.0V 8.5A 12.0V 6.8A 15.0V 4.2A 24.0V Peak 25.0A 25.0A 11.0A 8.5A 5.0A CONTINUOUS POWER 66W 90W 102W 103W 100W Symbol: "★" OVP built-in. "@" Adjustable. "#" Remote sensing. Remark: Peak output, less than 60sec. with 10% duty cycle. MECHANICAL DIMENSIONS: MM [INCHES] WEIGHT: 319.0g (11.25 Oz.) INPUT & OUTPUT CONNECTORS PIN ASSIGNMENT AC INPUT ASSIGNMENT LINE NEUTRAL GROUND CONNECTOR P1-1 P1-3 P1-5 & PIN # Mating connector: P1 & P2 Molex # 5195 or 5239 equivalent. P3 Molex # 5051 series or equivalent. VO1 P2-1,2(≧12A) P2-1,2,3(<12A) SINGLE OUTPUT DC-COM P2-3,4(≧12A) P2-4,5,6(<12A) Remote Sensing P3-1(+S) P3-2(-S) TOTAL POWER, INT. Tel: 877-646-0900 Fax: 978-453-7395 Email: [email protected] http://www.total-power.com -2-