TSLB257, TSLG257, TSLR257 HIGH-SENSITIVITY COLOR LIGHT-TO-VOLTAGE CONVERTERS TAOS027C − JUNE 2006 Converts Light Intensity to Output Voltage Integral Color Filter in Blue, Green, or Red Monolithic Silicon IC Containing PACKAGE S SIDELOOKER (FRONT VIEW) Photodiode, Operational Amplifier, and Feedback Components High Sensitivity Single Voltage Supply Operation Low Noise (200 µVrms Typ to 1 kHz) Rail-to-Rail Output High Power-Supply Rejection (35 dB at 1 kHz) Compact 3-Leaded Plastic Package RoHS Compliant (LF Package Only) 1 GND 2 VDD 3 OUT Description The TSLB257, TSLG257, and TSLR257 are high-sensitivity low-noise light-to-voltage optical converters that incorporate onboard blue, green, and red optical filters, respectively. These devices combine a photodiode and a transimpedance amplifier on a single monolithic CMOS integrated circuit with a color filter over the photodiode. Output voltage is directly proportional to light intensity (irradiance) on the photodiode. Each device has a transimpedance gain of 320 MΩ with improved offset voltage stability and low power consumption, and is supplied in a 3-lead clear plastic sidelooker package with an integral lens. These devices are ideal for applications such as colorimetry, printing process control, display color correction, and selectively ambient light detection or rejection. Functional Block Diagram − + Voltage Output Available Options DEVICE TA PACKAGE − LEADS PACKAGE DESIGNATOR ORDERING NUMBER TSLB257 0°C to 70°C 3-lead Sidelooker S TSLB257S TSLB257 0°C to 70°C 3-lead Sidelooker — Lead (Pb) Free S TSLB257S−LF TSLG257 0°C to 70°C 3-lead Sidelooker S TSLG257S TSLG257 0°C to 70°C 3-lead Sidelooker — Lead (Pb) Free S TSLG257S−LF TSLR257 0°C to 70°C 3-lead Sidelooker S TSLR257S TSLR257 0°C to 70°C 3-lead Sidelooker — Lead (Pb) Free S TSLR257S−LF The LUMENOLOGY Company Copyright 2006, TAOS Inc. Texas Advanced Optoelectronic Solutions Inc. 1001 Klein Road Suite 300 Plano, TX 75074 (972) 673-0759 www.taosinc.com 1 TSLB257, TSLG257, TSLR257 HIGH-SENSITIVITY COLOR LIGHT-TO-VOLTAGE CONVERTERS TAOS027C − JUNE 2006 Terminal Functions TERMINAL NAME DESCRIPTION NO. GND 1 Ground (substrate). All voltages are referenced to GND. OUT 3 Output voltage VDD 2 Supply voltage Absolute Maximum Ratings over operating free-air temperature range (unless otherwise noted)† Supply voltage, VDD (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 V Output current, IO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±10 mA Duration of short-circuit current at (or below) 25°C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 s Operating free-air temperature range, TA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −25°C to 85°C Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −25°C to 85°C Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240°C † Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTE 1: All voltages are with respect to GND. Recommended Operating Conditions Supply voltage, VDD Operating free-air temperature, TA Copyright 2006, TAOS Inc. MAX UNIT 2.7 5.5 V 0 70 °C The LUMENOLOGY Company 2 MIN www.taosinc.com TSLB257, TSLG257, TSLR257 HIGH-SENSITIVITY COLOR LIGHT-TO-VOLTAGE CONVERTERS TAOS027C − JUNE 2006 Electrical Characteristics at VDD = 5 V, TA = 25°C, RL = 10 kΩ (unless otherwise noted) (see Notes 2 and 3) TSLB257 PARAMETER TEST CONDITIONS VD Dark voltage Ee = 0 VOM Maximum out output ut voltage swing VDD = 4.5 V, No Load Output voltage TYP 0 VDD = 4.5 V, RL = 10 kΩ Ee = 1.7 µW/cm2, λp = 470 nm, Note 4 VO MIN TSLG257 MAX MIN 15 0 TYP 4.49 4 4.2 1.3 2 TSLR257 MAX MIN 15 0 4.49 4 4.2 1.3 2 Re RV PSRR IDD Temperature coefficient of dark voltage (VD) Irradiance responsivity Illuminance responsivity MAX 15 UNIT mV 4.49 4 V 4.2 2.7 Ee = 1.6 µW/cm2, λp = 524 nm, Note 5 2.7 Ee = 1.1 µW/cm2, λp = 635 nm, Note 6 αVD TYP V 1.3 2 TA = 0°C to 70°C −15 −15 −15 λp = 470 nm, see Notes 4 and 7 1.18 0.35 0.09 λp = 524 nm, see Notes 5 and 7 0.53 1.25 0.14 λp =565 nm, see Notes 7 and 8 0.09 1.17 0.36 λp = 635 nm, see Notes 6 and 7 0.05 0.14 1.82 λp = 470 nm, see Notes 4 and 7 1.57 0.47 0.12 λp = 524 nm, see Notes 5 and 7 0.10 0.24 0.027 λp = 565 nm, see Notes 7 and 8 0.015 0.20 0.06 λp = 635 nm, see Notes 6 and 7 0.033 0.093 1.21 2.7 µV/°C V/ (µW/ cm2) V/Ix Power supply y rejection j ratio fac = 100 Hz, see Note 10 55 55 55 fac = 1 kHz, see Note 10 35 35 35 Supply current VO = 2 V (typical) 1.9 3.5 1.9 3.5 1.9 dB 3.5 mA NOTES: 2. Measured with RL = 10 kΩ between output and ground. 3. Optical measurements are made using small-angle incident radiation from a light-emitting diode (LED) optical source. 4. The input irradiance is supplied by an InGaN light-emitting diode with the following characteristics: peak wavelength λp = 470 nm, spectral halfwidth ∆λ½ = 35 nm, luminous efficacy = 75 lm/W. 5. The input irradiance is supplied by an InGaN light-emitting diode with the following characteristics: peak wavelength λp = 524 nm, spectral halfwidth ∆λ½ = 47 nm, luminous efficacy = 520 lm/W. 6. The input irradiance is supplied by an AlInGaP light-emitting diode with the following characteristics: peak wavelength λp = 635 nm, spectral halfwidth ∆λ½ = 17 nm, luminous efficacy = 150 lm/W. 7. Responsivity is characterized over the range VO = 0.1 V to 4.5 V. The best-fit straight line of Output Voltage VO versus Irradiance Ee over this range will typically have a positive extrapolated VO value for Ee = 0. 8. The input irradiance is supplied by a GaP light-emitting diode with the following characteristics: peak wavelength λp = 565 nm, spectral halfwidth ∆λ½ = 28 nm, luminous efficacy = 595 lm/W. 9. Illuminance responsivity RV is calculated from the irradiance responsivity by using the LED luminous efficacy values stated in Notes 4, 5, 6, and 8, and using 1 lx = 1 lm/m2. 10. Power supply rejection ratio PSRR is defined as 20 log (∆VDD(f)/∆VO(f)) with VDD(f = 0) = 5 V and VO(f = 0) = 2 V. The LUMENOLOGY Company Copyright 2006, TAOS Inc. www.taosinc.com 3 TSLB257, TSLG257, TSLR257 HIGH-SENSITIVITY COLOR LIGHT-TO-VOLTAGE CONVERTERS TAOS027C − JUNE 2006 Switching Characteristics at VDD = 5 V, TA = 25°C, RL = 10 kΩ (unless otherwise noted) PARAMETER TEST CONDITIONS MIN TYP MAX UNIT tr Output pulse rise time, 10% to 90% of final value See Note 11 and Figure 1 160 250 µs tf Output pulse fall time, 10% to 90% of final value See Note 11 and Figure 1 150 250 µs ts Output settling time to 1% of final value See Note 11 and Figure 1 330 µs Integrated noise voltage f = dc to 1 kHz Ee = 0 200 µVrms f = 10 Hz Ee = 0 6 f = 100 Hz Ee = 0 6 f = 1 kHz Ee = 0 7 Vn Output noise voltage, g , rms µV/√Hz µ √ rms NOTE 11: Switching characteristics apply over the range VO = 0.1 V to 4.5 V. PARAMETER MEASUREMENT INFORMATION VDD Pulse Generator Ee 2 Input LED (see Note A) − 3 tf tr Output + 90% RL TSLx257 1 Output (see Note B) 10% 90% 10% VOLTAGE WAVEFORM TEST CIRCUIT NOTES: A. The input irradiance is supplied by a pulsed light-emitting diode with the following characteristics: tr < 1 µs, tf < 1 µs. B. The output waveform is monitored on an oscilloscope with the following characteristics: tr < 100 ns, Zi ≥ 1 MΩ, Ci ≤ 20 pF. Figure 1. Switching Times Copyright 2006, TAOS Inc. The LUMENOLOGY Company 4 www.taosinc.com TSLB257, TSLG257, TSLR257 HIGH-SENSITIVITY COLOR LIGHT-TO-VOLTAGE CONVERTERS TAOS027C − JUNE 2006 TYPICAL CHARACTERISTICS PHOTODIODE SPECTRAL RESPONSIVITY WITH EXTERNAL HOYA CM500 FILTER PHOTODIODE SPECTRAL RESPONSIVITY 1 1 0.9 TSLG257 Normalized to TSLR257 @ 670 nm TSLR257 0.8 0.8 TA = 25°C TSLG257 0.7 0.6 TSLB257 0.5 0.4 0.3 0.6 0.5 0.4 0.3 0.2 0.1 0.1 500 700 900 λ − Wavelength − nm 0 300 1100 500 Figure 2 0.9 8 0.8 Normalized Response V D− Dark Voltage − mV 1.0 9 7 6 5 4 3 0.7 0.6 0.5 0.4 0.3 2 0.2 1 0.1 0 10 1100 NORMALIZED RESPONSE vs ANGULAR DISPLACEMENT VDD = 5 V 0 700 900 λ − Wavelength − nm Figure 3 DARK VOLTAGE vs FREE-AIR TEMPERATURE 10 TA = 25°C 0.7 0.2 0 300 TSLR257 TSLB257 Relative Responsivity Relative Responsivity Normalized to TSLG257 @ 540 nm 0.9 20 30 40 50 60 TA − Free-Air Temperature − °C 70 0 −90 −70 −50 Figure 4 The LUMENOLOGY Company −30 −10 10 30 50 Angular Displacement − 70 90 Figure 5 Copyright 2006, TAOS Inc. www.taosinc.com 5 TSLB257, TSLG257, TSLR257 HIGH-SENSITIVITY COLOR LIGHT-TO-VOLTAGE CONVERTERS TAOS027C − JUNE 2006 MECHANICAL DATA The devices are supplied in a clear plastic three-lead package (S). PACKAGE S PLASTIC SINGLE-IN-LINE SIDE-LOOKER PACKAGE TOP VIEW 4.60 2.60 R 0.90 1.64 FRONT VIEW SIDE VIEW 2.30 0.15 Note B 1.80 4.60 1 1.56 0.42 14.86 0.50 Pb 22 Lead Free Available 0.47 TYP NOTES: A. B. C. D. E. 0.42 All linear dimensions are in millimeters; tolerance is ± 0.25 mm unless otherwise stated. Dimension is to center of lens arc, which is located below the package face. Index of refraction of clear plastic is 1.55. Lead finish for TSLx257 solder dipped, 63% Sn/37% Pb. Lead finish for TSLx257−LF: solder dipped, 100% Sn. This drawing is subject to change without notice. Figure 6. Package S — Single-In-Line Side-Looker Package Configuration Copyright 2006, TAOS Inc. The LUMENOLOGY Company 6 www.taosinc.com TSLB257, TSLG257, TSLR257 HIGH-SENSITIVITY COLOR LIGHT-TO-VOLTAGE CONVERTERS TAOS027C − JUNE 2006 PRODUCTION DATA — information in this document is current at publication date. Products conform to specifications in accordance with the terms of Texas Advanced Optoelectronic Solutions, Inc. standard warranty. Production processing does not necessarily include testing of all parameters. LEAD-FREE (Pb-FREE) and GREEN STATEMENT Pb-Free (RoHS) TAOS’ terms Lead-Free or Pb-Free mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TAOS Pb-Free products are suitable for use in specified lead-free processes. Green (RoHS & no Sb/Br) TAOS defines Green to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material). Important Information and Disclaimer The information provided in this statement represents TAOS’ knowledge and belief as of the date that it is provided. TAOS bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TAOS has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TAOS and TAOS suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. NOTICE Texas Advanced Optoelectronic Solutions, Inc. (TAOS) reserves the right to make changes to the products contained in this document to improve performance or for any other purpose, or to discontinue them without notice. Customers are advised to contact TAOS to obtain the latest product information before placing orders or designing TAOS products into systems. TAOS assumes no responsibility for the use of any products or circuits described in this document or customer product design, conveys no license, either expressed or implied, under any patent or other right, and makes no representation that the circuits are free of patent infringement. TAOS further makes no claim as to the suitability of its products for any particular purpose, nor does TAOS assume any liability arising out of the use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. TEXAS ADVANCED OPTOELECTRONIC SOLUTIONS, INC. PRODUCTS ARE NOT DESIGNED OR INTENDED FOR USE IN CRITICAL APPLICATIONS IN WHICH THE FAILURE OR MALFUNCTION OF THE TAOS PRODUCT MAY RESULT IN PERSONAL INJURY OR DEATH. USE OF TAOS PRODUCTS IN LIFE SUPPORT SYSTEMS IS EXPRESSLY UNAUTHORIZED AND ANY SUCH USE BY A CUSTOMER IS COMPLETELY AT THE CUSTOMER’S RISK. LUMENOLOGY, TAOS, the TAOS logo, and Texas Advanced Optoelectronic Solutions are registered trademarks of Texas Advanced Optoelectronic Solutions Incorporated. The LUMENOLOGY Company Copyright 2006, TAOS Inc. www.taosinc.com 7 TSLB257, TSLG257, TSLR257 HIGH-SENSITIVITY COLOR LIGHT-TO-VOLTAGE CONVERTERS TAOS027C − JUNE 2006 Copyright 2006, TAOS Inc. The LUMENOLOGY Company 8 www.taosinc.com