IRF IRG4PC30KDPBF

PD -95557
IRG4PC30KDPbF
INSULATED GATE BIPOLAR TRANSISTOR WITH
ULTRAFAST SOFT RECOVERY DIODE
Features
Short Circuit Rated
UltraFast IGBT
C
• High short circuit rating optimized for motor control,
tsc =10µs, @360V VCE (start), T J = 125°C,
VGE = 15V
• Combines low conduction losses with high
switching speed
• Tighter parameter distribution and higher efficiency
than previous generations
• IGBT co-packaged with HEXFREDTM ultrafast,
ultrasoft recovery antiparallel diodes
• Lead-Free
VCES = 600V
VCE(on) typ. = 2.21V
G
@VGE = 15V, IC = 16A
E
n-channel
Benefits
• Latest generation 4 IGBTs offer highest power density
motor controls possible
• HEXFREDTM diodes optimized for performance with IGBTs.
Minimized recovery characteristics reduce noise, EMI and
switching losses
• This part replaces the IRGBC30KD2 and IRGBC30MD2
products
• For hints see design tip 97003
TO-247AC
Absolute Maximum Ratings
Parameter
VCES
IC @ TC = 25°C
IC @ TC = 100°C
ICM
ILM
IF @ TC = 100°C
IFM
tsc
VGE
PD @ TC = 25°C
PD @ TC = 100°C
TJ
TSTG
Collector-to-Emitter Voltage
Continuous Collector Current
Continuous Collector Current
Pulsed Collector Current 
Clamped Inductive Load Current ‚
Diode Continuous Forward Current
Diode Maximum Forward Current
Short Circuit Withstand Time
Gate-to-Emitter Voltage
Maximum Power Dissipation
Maximum Power Dissipation
Operating Junction and
Storage Temperature Range
Soldering Temperature, for 10 sec.
Mounting Torque, 6-32 or M3 Screw.
Max.
Units
600
28
16
58
58
12
58
10
± 20
100
42
-55 to +150
V
A
µs
V
W
°C
300 (0.063 in. (1.6mm) from case)
10 lbf•in (1.1 N•m)
Thermal Resistance
Parameter
RθJC
RθJC
RθCS
RθJA
Wt
www.irf.com
Junction-to-Case - IGBT
Junction-to-Case - Diode
Case-to-Sink, flat, greased surface
Junction-to-Ambient, typical socket mount
Weight
Min.
Typ.
Max.
–––
–––
–––
–––
–––
–––
–––
0.24
–––
6 (0.21)
1.2
2.5
–––
40
–––
Units
°C/W
g (oz)
1
7/26/04
IRG4PC30KDPbF
Electrical Characteristics @ TJ = 25°C (unless otherwise specified)
V(BR)CES
∆V(BR)CES/∆TJ
VCE(on)
VGE(th)
∆VGE(th)/∆TJ
gfe
ICES
VFM
IGES
Parameter
Min. Typ. Max. Units
Collector-to-Emitter Breakdown Voltageƒ 600 —
—
V
Temperature Coeff. of Breakdown Voltage — 0.54 — V/°C
Collector-to-Emitter Saturation Voltage
— 2.21 2.7
— 2.88 —
V
— 2.36 —
Gate Threshold Voltage
3.0
—
6.0
Temperature Coeff. of Threshold Voltage
—
-12
— mV/°C
Forward Transconductance „
5.4 8.1
—
S
Zero Gate Voltage Collector Current
—
—
250
µA
—
— 2500
Diode Forward Voltage Drop
—
1.4 1.7
V
—
1.3 1.6
Gate-to-Emitter Leakage Current
—
— ±100 nA
Conditions
VGE = 0V, IC = 250µA
VGE = 0V, IC = 1.0mA
IC = 16A
VGE = 15V
See Fig. 2, 5
IC = 28A
IC = 16A, TJ = 150°C
VCE = VGE, IC = 250µA
VCE = VGE, IC = 250µA
VCE = 100V, IC = 16A
VGE = 0V, VCE = 600V
VGE = 0V, VCE = 600V, TJ = 150°C
IC = 12A
See Fig. 13
IC = 12A, TJ = 150°C
VGE = ±20V
Switching Characteristics @ TJ = 25°C (unless otherwise specified)
Qg
Qge
Qgc
t d(on)
tr
td(off)
tf
Eon
Eoff
Ets
tsc
Parameter
Total Gate Charge (turn-on)
Gate - Emitter Charge (turn-on)
Gate - Collector Charge (turn-on)
Turn-On Delay Time
Rise Time
Turn-Off Delay Time
Fall Time
Turn-On Switching Loss
Turn-Off Switching Loss
Total Switching Loss
Short Circuit Withstand Time
t d(on)
tr
t d(off)
tf
Ets
LE
Cies
Coes
Cres
trr
Turn-On Delay Time
Rise Time
Turn-Off Delay Time
Fall Time
Total Switching Loss
Internal Emitter Inductance
Input Capacitance
Output Capacitance
Reverse Transfer Capacitance
Diode Reverse Recovery Time
Irr
Diode Peak Reverse Recovery Current
Qrr
Diode Reverse Recovery Charge
di(rec)M/dt
Diode Peak Rate of Fall of Recovery
During tb
2
Min.
—
—
—
—
—
—
—
—
—
—
10
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Typ. Max. Units
Conditions
67 100
IC = 16A
11
16
nC
VCC = 400V
See Fig.8
25
37
VGE = 15V
60
—
42
—
TJ = 25°C
ns
160 250
IC = 16A, VCC = 480V
80 120
VGE = 15V, RG = 23Ω
0.60 —
Energy losses include "tail"
0.58 —
mJ and diode reverse recovery
1.18 1.6
See Fig. 9,10,14
—
—
µs
VCC = 360V, TJ = 125°C
VGE = 15V, RG = 10Ω , VCPK < 500V
58
—
TJ = 150°C,
See Fig. 11,14
42
—
IC = 16A, VCC = 480V
ns
210 —
VGE = 15V, RG = 23Ω,
160 —
Energy losses include "tail"
1.69 —
mJ and diode reverse recovery
13
—
nH
Measured 5mm from package
920 —
VGE = 0V
110 —
pF
VCC = 30V
See Fig. 7
27
—
ƒ = 1.0MHz
42
60
ns
TJ = 25°C See Fig.
80 120
TJ = 125°C
14
IF = 12A
3.5 6.0
A
TJ = 25°C See Fig.
5.6
10
TJ = 125°C
15
VR = 200V
80 180
nC
TJ = 25°C
See Fig.
220 600
TJ = 125°C
16
di/dt = 200Aµs
180 —
A/µs TJ = 25°C
See Fig.
160 —
TJ = 125°C
17
www.irf.com
IRG4PC30KDPbF
LOAD CURRENT (A)
18
16
For both:
14
Duty cycle: 50%
TJ = 125°C
Tsink = 90°C
Gate drive as specified
12
Power Dissipation = 24 W
Square wave:
10
60% of rated
voltage
8
I
6
4
Ideal diodes
2
0
0.1
1
10
100
f, Frequency (KHz)
Fig. 1 - Typical Load Current vs. Frequency
(Load Current = IRMS of fundamental)
100
TJ = 25 o C
TJ = 150 o C
10
1
0.1
V GE = 15V
20µs PULSE WIDTH
1
10
VCE , Collector-to-Emitter Voltage (V)
Fig. 2 - Typical Output Characteristics
www.irf.com
I C , Collector-to-Emitter Current (A)
I C , Collector-to-Emitter Current (A)
100
TJ = 150 o C
10
TJ = 25 oC
1
0.1
V CC = 50V
5µs PULSE WIDTH
5
10
15
VGE , Gate-to-Emitter Voltage (V)
Fig. 3 - Typical Transfer Characteristics
3
IRG4PC30KDPbF
4.0
VCE , Collector-to-Emitter Voltage(V)
Maximum DC Collector Current(A)
30
25
20
15
10
5
0
25
50
75
100
125
150
VGE = 15V
80 us PULSE WIDTH
IC = 32 A
3.0
IC = 16 A
IC = 8.0A
8A
2.0
1.0
-60 -40 -20
0
20
40
60
80 100 120 140 160
, Junction Temperature ( °C)
TT
J J, Junction Temperature ( °C )
TC , Case Temperature ( ° C)
Fig. 4 - Maximum Collector Current vs. Case
Temperature
Fig. 5 - Typical Collector-to-Emitter Voltage
vs. Junction Temperature
Thermal Response (Z thJC )
10
1
D = 0.50
0.20
P DM
0.10
0.1
0.01
0.00001
0.05
0.02
0.01
t1
t2
SINGLE PULSE
(THERMAL RESPONSE)
0.0001
Notes:
1. Duty factor D = t 1 / t 2
2. Peak TJ = PDM x Z thJC + TC
0.001
0.01
0.1
1
t1 , Rectangular Pulse Duration (sec)
Fig. 6 - Maximum Effective Transient Thermal Impedance, Junction-to-Case
4
www.irf.com
IRG4PC30KDPbF
1500
VGE , Gate-to-Emitter Voltage (V)
1200
C, Capacitance (pF)
20
VGE = 0V,
f = 1MHz
Cies = Cge + Cgc , Cce SHORTED
Cres = Cgc
Coes = Cce + Cgc
Cies
900
600
Coes
300
VCC = 400V
I C = 16A
16
12
8
4
Cres
0
1
10
0
100
VCE , Collector-to-Emitter Voltage (V)
10
Total Switching Losses (mJ)
Total Switching Losses (mJ)
V CC = 480V
V GE = 15V
TJ = 25 ° C
1.40 I C = 16A
1.30
1.20
1.10
10
20
30
40
R G, ,Gate
Gate Resistance
Resistance ((Ohm)
Ω)
RG
Fig. 9 - Typical Switching Losses vs. Gate
Resistance
www.irf.com
40
60
80
Fig. 8 - Typical Gate Charge vs.
Gate-to-Emitter Voltage
1.50
0
20
QG , Total Gate Charge (nC)
Fig. 7 - Typical Capacitance vs.
Collector-to-Emitter Voltage
1.00
0
50
RG = Ohm
23Ω
VGE = 15V
VCC = 480V
IC = 32 A
IC = 16 A
1
IC = 8.0A
8A
0.1
-60 -40 -20
0
20
40
60
80 100 120 140 160
TJ , Junction Temperature ( °C )
Fig. 10 - Typical Switching Losses vs.
Junction Temperature
5
IRG4PC30KDPbF
RG
TJ
VCC
4.0 VGE
100
Ω
= 23
Ohm
= 150 ° C
= 480V
= 15V
I C , Collector-to-Emitter Current (A)
Total Switching Losses (mJ)
5.0
3.0
2.0
1.0
0.0
0
8
16
24
32
10
1
40
VGE = 20V
o
125°C
T J = 125
C
SAFE OPERATING AREA
1
I C , Collector-to-emitter Current (A)
10
100
1000
VCE , Collector-to-Emitter Voltage (V)
Fig. 11 - Typical Switching Losses vs.
Collector-to-Emitter Current
Fig. 12 - Turn-Off SOA
Instantaneous Forward Current - I F (A)
100
TJ = 150°C
10
TJ = 125°C
TJ = 25°C
1
0.4
0.8
1.2
1.6
2.0
2.4
Forward Voltage Drop - V FM (V)
Fig. 13 - Maximum Forward Voltage Drop vs. Instantaneous Forward Current
6
www.irf.com
IRG4PC30KDPbF
100
160
VR = 200V
TJ = 125°C
TJ = 25°C
VR = 200V
TJ = 125°C
TJ = 25°C
120
I IRRM - (A)
t rr - (ns)
I F = 24A
I F = 12A
80
I F = 6.0A
I F = 24A
I F = 12A
10
IF = 6.0A
40
0
100
di f /dt - (A/µs)
1
100
1000
Fig. 14 - Typical Reverse Recovery vs. dif/dt
di f /dt - (A/µs)
1000
Fig. 15 - Typical Recovery Current vs. dif/dt
600
10000
VR = 200V
TJ = 125°C
TJ = 25°C
di(rec)M/dt - (A/µs)
VR = 200V
TJ = 125°C
TJ = 25°C
Q RR - (nC)
400
I F = 24A
I F = 12A
200
1000
I F = 12A
100
IF = 24A
IF = 6.0A
0
100
di f /dt - (A/µs)
Fig. 16 - Typical Stored Charge vs. dif/dt
www.irf.com
IF = 6.0A
1000
10
100
di f /dt - (A/µs)
1000
Fig. 17 - Typical di(rec)M/dt vs. dif/dt
7
IRG4PC30KDPbF
90% Vge
Same type
device as
D.U.T.
+Vge
Vce
430µF
80%
of Vce
D.U.T.
Ic
90% Ic
10% Vce
Ic
5% Ic
td(off)
tf
Eoff =
Fig. 18a - Test Circuit for Measurement of
ILM, Eon, Eoff(diode), trr, Qrr, Irr, td(on), tr, td(off), tf
∫
t1+5µS
Vce icIcdtdt
Vce
t1
t1
t2
Fig. 18b - Test Waveforms for Circuit of Fig. 18a, Defining
Eoff, td(off), tf
GATE VOLTAGE D.U.T.
10% +Vg
trr
Ic
Qrr =
tx
DUT VOLTAGE
AND CURRENT
Vce
10% Ic
90% Ic
tr
td(on)
10% Irr
Ipk
Vpk
Vcc
Irr
Ic
DIODE RECOVERY
WAVEFORMS
5% Vce
t1
∫
t2
VceieIcdtdt
Eon = Vce
t1
t2
DIODE REVERSE
RECOVERY ENERGY
t3
Fig. 18c - Test Waveforms for Circuit of Fig. 18a,
Defining Eon, td(on), tr
8
∫
+Vg
10% Vcc
Vcc
trr
id
Ic dtdt
tx
∫
t4
Erec = Vd
VdidIcdt dt
t3
t4
Fig. 18d - Test Waveforms for Circuit of Fig. 18a,
Defining Erec, trr, Qrr, Irr
www.irf.com
IRG4PC30KDPbF
Vg GATE SIGNAL
DEVICE UNDER TEST
CURRENT D.U.T.
VOLTAGE IN D.U.T.
CURRENT IN D1
t0
t1
t2
Figure 18e. Macro Waveforms for Figure 18a's Test Circuit
D.U.T.
L
1000V
Vc*
RL=
0 - 480V
480V
4 X IC @25°C
50V
6000µF
100V
Figure 19. Clamped Inductive Load Test Circuit
www.irf.com
Figure 20. Pulsed Collector Current
Test Circuit
9
IRG4PC30KDPbF
Notes:
Repetitive rating: VGE=20V; pulse width limited by maximum junction temperature
(figure 20)
‚VCC=80%(VCES), VGE=20V, L=10µH, RG= 23Ω (figure 19)
ƒPulse width ≤ 80µs; duty factor ≤ 0.1%.
„Pulse width 5.0µs, single shot.
TO-247AC Package Outline
Dimensions are shown in millimeters (inches)
TO-247AC Part Marking Information
EXAMPLE: T HIS IS AN IRFPE30
WIT H ASSEMBLY
LOT CODE 5657
ASSEMBLED ON WW 35, 2000
IN THE AS SEMBLY LINE "H"
Note: "P" in assembly line
position indicates "Lead-Free"
INT ERNATIONAL
RECT IFIER
LOGO
ASSEMBLY
LOT CODE
PART NUMBER
IRFPE30
56
035H
57
DAT E CODE
YEAR 0 = 2000
WEEK 35
LINE H
Data and specifications subject to change without notice.
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105
TAC Fax: (310) 252-7903
Visit us at www.irf.com for sales contact information.07/04
10
www.irf.com
Note: For the most current drawings please refer to the IR website at:
http://www.irf.com/package/