Industrial Power Supply BPW-8071 70W DC-DC Open Frame Power Supply Input Range: 10~30VDC Output 70W with 22FCM Fan Required 12.7 11.56 0.5 TB2 7.62 6.48 1 TB2 TRANSFORMER E 0V +15V 0.25 3.86 MAX. 0.5 DC-DC TB3 Features *Input Voltage: 10~30VDC with normal line at +24VDC *Input Frequency: 47~63Hz *Input Current: 13A at 10VDC max. *Inrush Current: < 15A at 10VDC input from cold start excluding EMI capactiors *Load Range: With all other outputs within their specified voltage accuracy ranges and 60% rated load conditions, the +5V output is between 5~5.1V. It could last 10 sec. at peak load and 25oC *Ripple and Noise: Peak to peak ripple and noise for +5V is < 50mV, and < 100mV for the other *Line Regulation: < +/-2% for each output at rated load and < +/-10% +12V and +24V input variables *Load Regulation: < +/-1% for +5V, < +/-5% for +12V and -12V *Efficiency: > 70% at nominal line and rated load *Altitude: > 10,000 feet *Protection: Built-in over voltage protection circuit. Trip point of crowbar circuit is between 5.7~7V hiccup mode against short circuit or over load conditions auto recovery when fault conditions are removed O.C.P. of +5V is 20A max. *Temperature: 0~+50oC (operating); -40~+85oC (storage) *Connectors: DC Input: Terminal blocks DC Output: Molex 5273-04A or equivalent device For Fan Use Only: Molex 5045-02A or equivalent device *Dimensions: 12.7 x 7.62 x 3.86 cm at tolerance +/-0.4mm www.boser.com.tw Safety Standards *Safety: UL 1950 / CSA 22.2 No.234 / VDE EN60950 *EMI: FCC class B / EN55022 B *EMS: Level 3 of IEC-802, 803, 804 PIN 1~3 4~6 7 8 Output Min. Voltage Load +5V 0A +12V 0A -12V 0A Rated Load 10A 1.5A 0.3A Output +5V GND +12V -12V Max. Load 14A 3A ---- Voltage Accuracy 5~5.1V 11.3~12V -10.8~-12V