BPW-8210 80W 24V DC-DC Open Frame Power Supply Input Range: 18~36VDC Industrial Power Supply 14.14 E 0.55 TRANSFORMER 8.38 6.78 24V 0.8 0.8 6.78 0V 15.24 3.1 1.5 DC-DC 3.3 3.8 0.4 14.44 Use #6-32 screw Protrusion limits 2.5mm x4 Features *Input Voltage: 18~36VDC *Input Current: 7A at 24VDC max. *Inrush Current: < 10A at 24VDC input from a cold start 25oC excluding EMI suppression capactiors *Load Range: With all other outputs within their accuracy ranges and all output at 60% rated load, the +5V output is between 4.95~5.05V. Max. load can not exceed 80W convection cooling and 100W forced air cooling *Ripple and Noise: Peak to peak ripple and noise for +5V is < 50mV, and < 100mV for the other outputs at rated load, nominal line *Line Regulation: < +/-1% for each output at rated load and +/-10% of input voltage variables *Load Regulation: < +/-1% for +5V, and < +/-5% for -12V, +12V, -5V while changing measured output load from +/-40% to 60% rated load and keeping other outputs at 60% rated load *Efficiency: > 70% at DC24V and rated load *Altitude: > 10,000 feet *Protection: Built-in over voltage protection circuit. Trip point of crowbar circuit is between 5.7~7V. Hiccup mode against short circuit or over load conditions auto recovery when fault conditions are removed *Temperature: 0~+50oC, can start up -20oC (operating); -40~+85oC (storage) *Connectors: DC Input: Terminal blocks DC Output: Molex 5273-12A *Dimensions: 15.24 x 8.38 x 3.8 cm with +/-0.8mm and +/-0.4mm tolerance between mounting holes www.boser.com.tw screw System chassis Safety Standards *Safety: UL 1950 / CSA 22.2 No.234 / VDE EN60950 *EMI: FCC class B / EN55022 B *EMS: Level 3 of IEC-802, 803, 804 PIN 1~3 4~7 8~9 10 11 12 Output Min. Voltage Load +5V 0A +12V 0A -12V 0A -5V 0A Rated Load 10A 2A 0.5A 0.5A Output +5V GND +12V -12V -5V N/C Max. Load 12A 3A ------- Voltage Accuracy 5~5.2V 11.4~12.6V -11.4~-12.6V -5.25~-4.75V 0.25 1.4 6.85 3.87 0.765 1.5 6.85