SD700C..L Series Vishay High Power Products Standard Recovery Diodes (Hockey PUK Version), 700 A FEATURES • Wide current range • High voltage ratings up to 4500 V RoHS COMPLIANT • High surge current capabilities • Diffused junction • Hockey PUK version DO-200AB (B-PUK) • Case style DO-200AB (B-PUK) • Lead (Pb)-free TYPICAL APPLICATIONS • Converters PRODUCT SUMMARY IF(AV) 700 A • Power supplies • High power drives • Auxiliary system supplies for traction applications MAJOR RATINGS AND CHARACTERISTICS PARAMETER TEST CONDITIONS IF(AV) Ths IF(RMS) Ths IFSM I2 t VRRM VALUES UNITS 700 A 55 °C 1310 A 25 °C 50 Hz 7500 60 Hz 7850 A 50 Hz 281 60 Hz 257 Range 3000 to 4500 V - 40 to 150 °C IRRM MAXIMUM AT TJ = TJ MAXIMUM mA TJ kA2s ELECTRICAL SPECIFICATIONS VOLTAGE RATINGS TYPE NUMBER VOLTAGE CODE VRRM, MAXIMUM REPETITIVE PEAK REVERSE VOLTAGE V VRSM, MAXIMUM NON-REPETITIVE PEAK REVERSE VOLTAGE V 30 3000 3100 36 3600 3700 40 4000 4100 45 4600 4600 SD700C..L Document Number: 93552 Revision: 14-May-08 For technical questions, contact: [email protected] 50 www.vishay.com 1 SD700C..L Series Vishay High Power Products Standard Recovery Diodes (Hockey PUK Version), 700 A FORWARD CONDUCTION PARAMETER SYMBOL Maximum average forward current at heatsink temperature IF(RMS) Maximum peak, one-cycle forward, non-repetitive surge current 1310 t = 8.3 ms t = 10 ms t = 8.3 ms t = 10 ms t = 8.3 ms Maximum I2√t I2√t for fusing °C 7500 t = 10 ms I2 t A 55 (85) t = 10 ms No voltage reapplied UNITS 700 (345) 25 °C heatsink temperature double side cooled t = 8.3 ms IFSM Maximum I2t for fusing VALUES 180° conduction, half sine wave Double side (single side) cooled IF(AV) Maximum RMS forward current TEST CONDITIONS 7850 A 6310 100 % VRRM reapplied Sinusoidal half wave, initial TJ = TJ maximum No voltage reapplied 6600 281 257 199 100 % VRRM reapplied kA2s 182 t = 0.1 to 10 ms, no voltage reapplied 2810 Low level value of threshold voltage VF(TO)1 (16.7 % x π x IF(AV) < I < π x IF(AV)), TJ = TJ maximum 0.88 High level value of threshold voltage VF(TO)2 (I > π x IF(AV)), TJ = TJ maximum 0.99 kA2√s V Low level value of forward slope resistance rf1 (16.7 % x π x IF(AV) < I < π x IF(AV)), TJ = TJ maximum 0.78 High level value of forward slope resistance rf2 (I > π x IF(AV)), TJ = TJ maximum 0.73 Ipk = 1000 A, TJ = TJ maximum, tp = 10 ms sinusoidal wave 1.66 V VALUES UNITS mΩ Maximum forward voltage drop VFM THERMAL AND MECHANICAL SPECIFICATIONS PARAMETER SYMBOL Maximum junction operating temperature range Maximum storage temperature range Maximum thermal resistance, junction to heatsink TEST CONDITIONS TJ - 40 to 150 TStg - 55 to 200 RthJ-hs DC operation single side cooled 0.011 DC operation double side cooled 0.05 Mounting force, ± 10 % Approximate weight Case style See dimensions - link at the end of datasheet °C K/W 9800 (1000) N (kg) 250 g DO-200AB (B-PUK) ΔRthJ-hs CONDUCTION CONDUCTION ANGLE SINUSOIDAL CONDUCTION RECTANGULAR CONDUCTION SINGLE SIDE DOUBLE SIDE SINGLE SIDE DOUBLE SIDE 180° 0.011 0.011 0.008 0.008 120° 0.014 0.015 0.014 0.014 90° 0.018 0.018 0.019 0.019 60° 0.026 0.026 0.027 0.028 30° 0.045 0.046 0.046 0.046 TEST CONDITIONS UNITS TJ = TJ maximum K/W Note • The table above shows the increment of thermal resistance RthJ-hs when devices operate at different conduction angles than DC www.vishay.com 2 For technical questions, contact: [email protected] Document Number: 93552 Revision: 14-May-08 SD700C..L Series Maxim um Allowable Heatsin k Tem perature (°C) 150 SD700C..L Series ( Single Side Cooled) R th J-hs (DC) = 0.11 K/W 140 130 120 110 100 C o ndu ct io n A ng le 90 80 70 30° 60° 90° 60 120° 50 40 180° 30 0 100 200 300 400 500 Maximum Allowable Heatsink Tem perature (°C) Standard Recovery Diodes Vishay High Power Products (Hockey PUK Version), 700 A 150 140 130 120 110 100 90 80 70 60 50 40 30 20 SD700C..L Series (Double Side Cooled) R thJ- hs (DC) = 0.05 K/W Co n duc tio n Pe rio d 30° 60° 90° 120° 180° DC 0 Average Forward Curren t (A) 600 800 1000 1200 1400 Fig. 4 - Current Ratings Characteristics 2500 150 140 130 120 110 100 90 80 70 60 50 40 30 20 SD700C..L Series ( Single Side Cooled) R th J-hs (D C) = 0.11 K/W Maxim um Average Forward Power Loss (W ) Maxim um Allowable Heatsin k Tem perature (°C) 400 Average Forward Current (A) Fig. 1 - Current Ratings Characteristics C o ndu ctio n Pe rio d 30° 60° 90° 120° 180° DC 0 200 400 600 180° 120° 90° 60° 30° 2000 1500 RM S Lim it 1000 Co n duc tio n An g le 500 SD700C..L Series TJ = 150°C 0 0 800 Average Forward Current (A) 200 400 600 800 1000 Average Forward Current (A) Fig. 5 - Forward Power Loss Characteristics Fig. 2 - Current Ratings Characteristics SD2000C..L Series (Double Side Cooled) R th J- hs (DC) = 0.031 K/W 160 140 120 100 C o nd uctio n A ng le 80 30° 60 60° 90° 40 120° 180° 20 0 0 500 1000 1500 2000 2500 Average Forward Current (A) Fig. 3 - Current Ratings Characteristics Document Number: 93552 Revision: 14-May-08 Maxim um Average Forw ard Power Loss (W ) 2500 180 Maxim um Allowable Heatsin k Tem perature ( °C) 200 DC 180° 120° 90° 60° 30° 2000 1500 RM S Lim it 1000 C o nd uctio n P erio d 500 SD 700C..L Series TJ = 150°C 0 0 200 400 600 800 1000 1200 1400 Average Forward Current (A) Fig. 6 - Forward Power Loss Characteristics For technical questions, contact: [email protected] www.vishay.com 3 SD700C..L Series Vishay High Power Products Standard Recovery Diodes (Hockey PUK Version), 700 A 9000 At Any Rated Load Con dition And W ith 50% Rated V RR M Applied Followin g Surge In itial TJ = 150 °C 6000 @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s Peak Half Sin e W ave Forward Current (A) Peak Half Sine W ave Forward Cu rrent (A) 7000 5000 4000 3000 SD700C..L Series 2000 1 10 Maxim um Non Repetitive Surge Curren t V ersus Pulse Train Duration. In itial TJ = 150 °C No Voltage Reapplied 50% Rated V RR MReapplied 8000 7000 6000 5000 4000 3000 2000 SD700C..L Series 1000 0.01 100 0.1 1 Pulse Train Duration (s) N um be r O f Eq ual A m p lit ude H alf C y cle C urre nt P ulse s (N ) Fig. 7 - Maximum Non-Repetitive Surge Current Single and Double Side Cooled Fig. 8 - Maximum Non-Repetitive Surge Current Single and Double Side Cooled In stant aneous Forward Current (A) 10000 TJ = 25°C T = 150°C J 1000 SD 700C..L Series 100 0.5 1 1. 5 2 2.5 3 3.5 4 Instan tan eous Forward Voltage (V) Fig. 9 - Forward Voltage Drop Characteristics T ran s ie n t T h e rm a l Im p e d a n c e Z thJ-hs (K / W ) 1 S t e a d y S t a te V alue R thJ-hs = 0 .1 1 K /W ( S in g le Sid e C o o le d ) 0 .1 R thJ-hs = 0 .0 5 K /W ( D o ub le Sid e C o o le d ) ( D C O pe ra tio n ) 0 .0 1 S D 7 0 0 C ..L S e rie s 0 .0 0 1 0 .0 01 0 .01 0 .1 1 10 S qu a re W a v e P ulse D u r at io n ( s) Fig. 10 - Thermal Impedance ZthJ-hs Characteristics www.vishay.com 4 For technical questions, contact: [email protected] Document Number: 93552 Revision: 14-May-08 SD700C..L Series Standard Recovery Diodes Vishay High Power Products (Hockey PUK Version), 700 A ORDERING INFORMATION TABLE Device code SD 70 0 C 45 L 1 2 3 4 5 6 1 - Diode 2 - Essential part number 3 - 0 = Standard recovery 4 - C = Ceramic PUK 5 - Voltage code x 100 = VRRM (see Voltage Ratings table) 6 - L = PUK case DO-200AB (B-PUK) LINKS TO RELATED DOCUMENTS Dimensions Document Number: 93552 Revision: 14-May-08 http://www.vishay.com/doc?95246 For technical questions, contact: [email protected] www.vishay.com 5 Outline Dimensions Vishay Semiconductors DO-200AB (B-PUK) DIMENSIONS in millimeters (inches) 58.5 (2.30) DIA. MAX. 3.5 (0.14) DIA. NOM. x 1.8 (0.07) deep MIN. both ends 34 (1.34) DIA. MAX. 2 places 25.4 (1) 26.9 (1.06) 0.8 (0.03) both ends 53 (2.09) DIA. MAX. Quote between upper and lower pole pieces has to be considered after application of mounting force (see Thermal and Mechanical Specifications) Document Number: 95246 Revision: 05-Nov-07 For technical questions, contact: [email protected] www.vishay.com 1 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000