Specification AXPLO10 Oscillator type: Phase-Locked 10

Designed and
Manufactured
in Germany
Specification
Oscillator type:
Rev.: 2
AXPLO10
Phase-Locked 10 MHz OCXO (PLOCXO)
Parameter
Delivers a low noise output from a 10 MHz reference input signal
min.
typ.
max. Unit
Condition
Nominal output frequency fOUT
Frequency stability (free running)
frequency tolerance
vs. operating temperature range
vs. supply voltage variation (pushing)
vs. load change (pulling)
Long term (aging) per day
Long term (aging) per year
Reference input
Input frequency fREF
Frequency accuracy
Signal waveform
Input level
Input impedance
RF output
Signal waveform
Load RL
Amplitude
Harmonics
Phase noise
Lock detect (LD) output
Supply voltage VS
Current consumption (warm-up)
Current consumption (steady state)
Operating temperature range
10.000
±1
MHz
Note 2
±2
±10
±2
±2
±1
±50
ppm
ppb
ppb
ppb
ppb
ppb
VS ±5%
RL ±5%
after 30 days operation
after 30 days operation
±0.5
MHz
ppm
10.000
Note 3
Sine wave
0
+13
dBm
Ω
50
Sine wave
50
+7
3.5
11.4
-10
-30
Consult factory
0
1.5
5
12.0
12.6
450
200
+60
54x40x19
Enclosure (see drawing) (LxWxH)
Weight
Packing
Notes:
1.
2.
3.
4.
5.
6.
Date: 2014-06-20
60
Ω
dBm
dBc
V
V
V
mA
mA
°C
mm
g
±5%
Note 4
Note 5
Out of lock
Locked
Note 6
@ +25°C
h = 2.0
Palette
Terminology and test conditions are according to IEC60679-1 and MIL-PRF-55310, unless otherwise stated
Other output frequency on request with fOUT = fREF·M or fOUT = fREF·M/N
Other input frequency on request
Higher output level (up to 15 dBm) on request
To be optimized to application w.r.t to phase noise
Other supply voltage on request
Absolute Maximum Ratings
Parameter
min.
max.
Unit
Condition
Supply Voltage VS
Reference Input Level
Storage Temperature
-0.5
-55
VS + 10%
+15
+125
V
dBm
°C
VS to GND
GmbH & Co. KG
Roemerring 9
D-74821 Mosbach
Germany
AXPLO10 Rev.2
Drawing D0
Page 1(3)
www.axtal.com
fon: +49 (6261) 939834
fax: +49 (6261) 939836
E-mail: [email protected]
Designed and
Manufactured
in Germany
Ordering Code
Model
Input Frequency [MHz]
Output Frequency [MHz] Revision
AXPLO10
10.000
Example: AXPLO10-10.000-10.000_Rev.2
10.000
Rev.2
Enclosure drawing
Pin connections:
Pin # Symbol
1
LD
2
GND
3
VS
SMA1 RF OUT
SMA2
FREF
Function
Lock Detect Output
Ground
Supply Voltage
RF Output
Reference Frequency Input
GmbH & Co. KG
Roemerring 9
D-74821 Mosbach
Germany
AXPLO10 Rev.2
Drawing D0
Page 2(3)
www.axtal.com
fon: +49 (6261) 939834
fax: +49 (6261) 939836
E-mail: [email protected]
Designed and
Manufactured
in Germany
Handling and Testing
Parameter
Procedure
Handling and Testing
Processing
Source
Application Note AXAN-011
Application Note AXAN-012
Parameter
Procedure
Electrostatic discharge (ESD)
THD devices
SMD devices
Washable
RoHS- Compliant
IEC60749-26
IEC60749-27
Yes
Yes
www.axtal.com
www.axtal.com
Condition
HBM
MM
No
No
2000 V
200 V
Environmental conditions
Test
Sealing tests
(if applicable)
Solderability
Resistance to
soldering heat
Shock*
IEC
60068
Part …
2-17
IEC
60679-1
Clause
5.6.2
MIL-STD202G
Method
112E
2-20
2-58
5.6.3
208H
210F
2-27
5.6.8
213B
Vibration,
2-6
5.6.7.1
201A
sinusoidal*
204D
Vibration,
2-64
5.6.7.3
214A
random*
Endurance tests
108A
- ageing
5.7.1
- extended aging
5.7.2
Other environmental conditions on request
MIL-STD810F
Method
MIL-PRF55310D
Clause
3.6.1.2
3.6.52
3.6.48
516.4
3.6.40
516.4-4
3.6.38.1
3.6.38.2
3.6.38.3
3.6.38.4
514.5
4.8.35
Test conditions (IEC)
Gross leak: Test Qc,
Fine leak: Test Qk
Test Ta Method 1
Test Td1 Method 2
Test Td2 Method 2
Test Ea, 3 x per axes 100g,
6 ms half-sine pulse
Test Fc, 30 min per axes,
10 Hz - 55 Hz 0,75mm; 55 Hz - 2 kHz, 10g
Test Fdb
30 days @ 85°C, OCXO @25°C
1000h, 2000h, 8000h @85°C
Data sheet is for information purposes only and may be subject to modifications or may be discontinued without notice.
Revision History
Rev.
Drawing
Date
[dd.mm.yyyy]
1
1
2
D0
D1
D0
29.01.2011
01.10.2012
20.06.2014
GmbH & Co. KG
Roemerring 9
D-74821 Mosbach
Germany
Remarks
First issue
Minor editorial changes
Various parameters updated,
environmental conditions updated, editorial changes
AXPLO10 Rev.2
Drawing D0
Page 3(3)
Author
Checked
BN
BN
HH
BN
BN
HH
www.axtal.com
fon: +49 (6261) 939834
fax: +49 (6261) 939836
E-mail: [email protected]