Designed and Manufactured in Germany Specification Oscillator type: Rev.: 1 Date: 2014-07-04 AXIOM75-44 High Stability OCXO with Sine Wave Output Parameter Nominal frequency Frequency stability Initial tolerance @ +25°C Overall vs. supply voltage variation (pushing) vs. load change (pulling) Long term (aging) per day st Long term (aging) 1 year (Note 2) Frequency adjustment range Electronic Frequency Control (EFC) EFC voltage VC EFC slope (∆f / ∆VC) EFC input impedance RF output Signal waveform Load RL Output level Harmonics Spurious Warm-up time @ +25°C Phase noise Supply voltage VS Current consumption (steady state) Current consumption (warm-up) Operating temperature range Enclosure (see drawing) (LxWxH) Weight Packing Notes: 1. 2. min. typ. max. 10.000 2.0 Positive ±200 ±150 ppb ppb ppb ppb ppb ppb ±1 4.0 ppm V 100 +4 @VC =2.0 V (Note 2) VS ±5% (Note 2) RL ±5% after 30 days operation after 30 days operation kΩ Sine wave 50 +5 5 13.5 Condition MHz ±10 ±5 ±2 ±50 ±0.3 0 Unit 15.0 -20 +6 -25 -90 7 -140 -145 -150 -155 16.5 200 400 +70 25.8x25.8x15 max. 20 Palette Ω dBm dBc dBc min dBc/Hz dBc/Hz dBc/Hz dBc/Hz V mA mA °C mm g ±5% ∆ffinal/f0 < ±0.1 ppm @ 100 Hz @ 1 kHz @ 10 kHz @ 100 kHz @ +25°C IEC 60679-3 CO 43 Terminology and test conditions are according to IEC60679-1 and MIL-PRF-55310, unless otherwise state Overall stability includes frequency stability over operating temperature range , aging (1 year) and pushing Absolute Maximum Ratings Parameter min. max. Supply Voltage VS Control Voltage VC Storage Temperature -0.5 -0.5 -55 VS + 10% 15 +125 GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany AXIOM75-44 Rev.1 Drawing D0 Page 1(3) Unit Condition V V °C VS to GND VC to GND www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected] Designed and Manufactured in Germany Ordering Code Model Revision Frequency [MHz] AXIOM75-44 Rev.1 10.000 Example: AXIOM75-44_Rev.1 – 10.000 MHz Enclosure drawing Pin connections Pin # 1 2 3 4 5 Handling and Testing Parameter Handling and Testing Processing Parameter Electrostatic discharge (ESD) THD devices SMD devices Washable RoHS- Compliant GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany Symbol RF OUT GND VC N.C. VS Procedure Application Note AXAN-011 Application Note AXAN-012 Procedure IEC60749-26 IEC60749-27 Yes Yes AXIOM75-44 Rev.1 Drawing D0 Page 2(3) HBM MM No No Function RF Output Ground Control Voltage (EFC) No connection Supply Voltage Source www.axtal.com www.axtal.com Condition 2000 V 200 V www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected] Designed and Manufactured in Germany Environmental conditions Test Sealing tests (if applicable) Solderability Resistance to soldering heat Shock* Vibration, sinusoidal* Vibration, random* Endurance tests - ageing - extended aging IEC 60068 Part … 2-17 IEC 60679-1 Clause 5.6.2 MIL-STD202G Method 112E MIL-STD810F Method MIL-PRF55310D Clause 3.6.1.2 2-20 2-58 5.6.3 208H 210F 2-27 5.6.8 213B 516.4 3.6.40 2-6 5.6.7.1 516.4-4 2-64 5.6.7.3 201A 204D 214A 3.6.38.1 3.6.38.2 3.6.38.3 3.6.38.4 3.6.52 3.6.48 514.5 Test conditions (IEC) Gross leak: Test Qc, Fine leak: Test Qk Test Ta Method 1 Test Td1 Method 2 Test Td2 Method 2 Test Ea, 3 x per axes 100g, 6 ms half-sine pulse Test Fc, 30 min per axes, 10 Hz - 55 Hz 0,75mm; 55 Hz - 2 kHz, 10g Test Fdb 108A 5.7.1 5.7.2 4.8.35 30 days @ 85°C, OCXO @25°C 1000h, 2000h, 8000h @85°C Revision History Rev. Drawing Date [dd.mm.yyyy] 1 D0 04.07.2014 GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany Remarks First issue AXIOM75-44 AXIOM75-44 Rev.1 Drawing D0 Page 3(3) Author Checked BN BN www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected]