RENESAS CR02AM-8

CR02AM-8
Thyristor
Low Power Use
REJ03G0351-0200
Rev.2.00
Mar.01.05
Features
• IT (AV) : 0.3 A
• VDRM : 400 V
• IGT : 100 µA
• Planar Passivation Type
Outline
PRSS0003EA-A
(Package name: TO-92)
2
1. Cathode
2. Anode
3. Gate
3
1
3
2
1
Applications
Solid state relay, leakage protector, fire alarm, timer, ring counter, electric blanket, protective circuit for acoustic
equipment, strobe flasher, and other general purpose control applications
Maximum Ratings
Parameter
Repetitive peak reverse voltage
Non-repetitive peak reverse voltage
DC reverse voltage
Repetitive peak off-state voltageNote1
DC off-state voltageNote1
Rev.2.00,
Mar.01.2005,
page 1 of 7
Symbol
VRRM
VRSM
VR (DC)
VDRM
VD (DC)
Voltage class
8
400
500
320
400
320
Unit
V
V
V
V
V
CR02AM-8
Parameter
RMS on-state current
Average on-state current
Symbol
IT (RMS)
IT (AV)
Ratings
0.47
0.3
Unit
A
A
ITSM
10
A
I2 t
0.4
A2s
PGM
PG (AV)
VFGM
VRGM
IFGM
Tj
Tstg
—
0.1
0.01
6
6
0.1
– 40 to +125
– 40 to +125
0.23
W
W
V
V
A
°C
°C
g
Surge on-state current
I2t for fusing
Peak gate power dissipation
Average gate power dissipation
Peak gate forward voltage
Peak gate reverse voltage
Peak gate forward current
Junction temperature
Storage temperature
Mass
Conditions
Commercial frequency, sine half wave
180° conduction, Ta = 30°C
60Hz sine half wave 1 full cycle,
peak value, non-repetitive
Value corresponding to 1 cycle of half
wave 60Hz, surge on-state current
Typical value
Notes: 1. With gate to cathode resistance RGK = 1 kΩ.
Electrical Characteristics
Parameter
Repetitive peak reverse current
Repetitive peak off-state current
Symbol
IRRM
IDRM
Min.
—
—
Typ.
—
—
Max.
0.1
0.1
Unit
mA
mA
On-state voltage
VTM
—
—
1.6
V
Ta = 25°C, ITM = 0.6 A,
instantaneous value
Gate trigger voltage
VGT
—
—
0.8
V
Tj = 25°C, VD = 6 V,
Note3
IT = 0.1 A
Gate non-trigger voltage
VGD
0.2
—
—
V
Tj = 125°C, VD = 1/2 VDRM,
RGK = 1 kΩ
Gate trigger current
IGT
1
—
100Note2
µA
Tj = 25°C, VD = 6 V,
Note3
IT = 0.1 A
Holding current
IH
—
—
3
mA
Rth (j-a)
—
—
180
°C/W
Tj = 25°C, VD = 12 V,
RGK = 1 kΩ
Junction to ambient
Thermal resistance
Test conditions
Tj = 125°C, VRRM applied
Tj = 125°C, VDRM applied,
RGK = 1 kΩ
Notes: 2. If special values of IGT are required, choose item D or E from those listed in the table below if possible.
Item
A
B
C
D
E
IGT (µA)
1 to 30
20 to 50
40 to 100
1 to 50
20 to 100
The above values do not include the current flowing through the 1 kΩ resistance between the gate and
cathode.
3. IGT, VGT measurement circuit.
A1
3V
DC
IGS
IGT
A3
A2
RGK
1
1kΩ
Switch
2
60Ω
TUT
V1
6V
DC
VGT
Switch 1 : IGT measurement
Switch 2 : VGT measurement
(Inner resistance of voltage meter is about 1kΩ)
Rev.2.00,
Mar.01.2005,
page 2 of 7
CR02AM-8
Performance Curves
101
7 Ta = 25°C
5
3
2
Rated Surge On-State Current
10
Surge On-State Current (A)
On-State Current (A)
Maximum On-State Characteristics
100
7
5
3
2
10–1
7
5
3
2
7
5
3
2
VFGM = 6V
PGM = 0.1W
PG(AV) = 0.01W
VGT = 0.8V
IGT = 100µA
(Tj = 25°C)
VGD = 0.2V
IFGM = 0.1A
10–2
10–2 2 3 5 710–12 3 5 7 100 2 3 5 7 101 2 3 5 7 102
2
1
2 3 4 5 7 101
2 3 4 5 7 10 2
× 100 (%)
103
7
5
3
2
Typical Example
102
7
5
3
2
101
7
5
3
2
100
–60 –40 –20 0 20 40 60 80 100 120 140
Junction Temperature (°C)
Gate Trigger Voltage vs.
Junction Temperature
Maximum Transient Thermal Impedance
Characteristics (Junction to ambient)
0.9
Gate Trigger Voltage (V)
3
Gate Current (mA)
1.0
Distribution
0.8
Typical Example
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
–40 –20 0 20 40 60 80 100 120 140 160
Junction Temperature (°C)
Rev.2.00,
4
Gate Trigger Current vs.
Junction Temperature
10–1
7
5
3
2
5
Gate Characteristics
Gate Trigger Current (Tj = t°C)
Gate Trigger Current (Tj = 25°C)
100
6
Conduction Time (Cycles at 60Hz)
Mar.01.2005,
page 3 of 7
Transient Thermal Impedance (°C/W)
Gate Voltage (V)
7
5
3
2
7
On-State Voltage (V)
102
101
8
0
100
10–2
1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6
7
5
3
2
9
100 2 3 5 7 101 2 3 5 7 102 2 3 5 7 103
200
180
160
140
120
100
80
60
40
20
0
10–3 2 3 5 710–2 2 3 5 710–1 2 3 5 7 100
Time (s)
CR02AM-8
Allowable Ambient Temperature vs.
Average On-State Current
(Single-Phase Half Wave)
0.8
160
0.7
140
θ
120
360°
0.6
180°
120°
0.5
60°
0.4
90°
θ = 30°
0.3
θ
0.2
360°
Resistive,
inductive loads
0.1
0
0
0.1
0.2
Ambient Temperature (°C)
Average Power Dissipation (W)
Maximum Average Power Dissipation
(Single-Phase Half Wave)
20
θ = 30° 60°
0
90° 120°
0.1
0.2
180°
0.4
0.3
Maximum Average Power Dissipation
(Single-Phase Full Wave)
Allowable Ambient Temperature vs.
Average On-State Current
(Single-Phase Full Wave)
160
0.7
Ambient Temperature (°C)
Average Power Dissipation (W)
40
Average On-State Current (A)
180°
120°
0.6
90°
0.5
60°
0.4
θ = 30°
0.3
θ
0.2
θ
360°
0.1
140
θ
120
360°
0
0.1
0.2
0.3
80
60
40
20
0
0.5
0.4
θ
Resistive loads
Natural convection
100
θ = 30°
Resistive loads
0
0
0.1
60° 90° 120°
0.2
180°
0.4
0.3
0.5
Average On-State Current (A)
Average On-State Current (A)
Maximum Average Power Dissipation
(Rectangular Wave)
Allowable Ambient Temperature vs.
Average On-State Current
(Rectangular Wave)
0.8
160
DC
0.7
180°
0.6
270°
120°
0.5
60°
0.4
90°
θ = 30°
0.3
θ
0.2
360°
0.1
0
Resistive,
inductive loads
0
0.1
0.2
0.3
0.4
Average On-State Current (A)
Mar.01.2005,
page 4 of 7
0.5
Ambient Temperature (°C)
Average Power Dissipation (W)
60
Average On-State Current (A)
0.8
Rev.2.00,
80
0
0.4
0.3
Resistive,
inductive loads
Natural convection
100
Resistive,
inductive loads
Natural convection
140
θ
360°
120
100
θ = 30°
60°
90°
120°
180°
270°
DC
80
60
40
20
0
0
0.1
0.2
0.3
0.4
Average On-State Current (A)
0.5
Typical Example
RGK = 1kΩ
140
120
100
80
60
40
20
0
–40 –20 0 20 40 60 80 100 120 140 160
Breakover Voltage vs.
Gate to Cathode Resistance
120
Typical Example
Tj = 125°C
100
80
60
40
20
0
10–1 2 3 5 7 100 2 3 5 7 101 2 3 5 7 102
Junction Temperature (°C)
Gate to Cathode Resistance (kΩ)
Breakover Voltage vs.
Rate of Rise of Off-State Voltage
Holding Current vs.
Junction Temperature
100
80
60
#2
40
#1
Typical Example
# 1 IGT(25°C)=10µA
20
# 2 IGT(25°C)=66µA
Tj = 125°C, RGK = 1kΩ
0
100 2 3 5 7 101 2 3 5 7 102 2 3 5 7 103
Holding Current (mA)
120
102
7
5
3
2
101
7
5
3
2
Tj = 25°C
Typical Example
IH(25°C) = 1mA
IGT(25°C) = 25µA
Distribution
Typical Example
100
7
5
3
2
10–1
–60 –40 –20 0 20 40 60 80 100 120 140
Junction Temperature (°C)
Holding Current vs.
Gate to Cathode Resistance
Repetitive Peak Reverse Voltage vs.
Junction Temperature
500
Typical Example
IGT(25°C) IH(1kΩ)
1.6mA
# 1 13µA
# 2 59µA
1.8mA
400
#1
300
#2
200
100
Tj = 25°C
0
10–1 2 3 5 7 100 2 3 5 7 101 2 3 5 7 102
Mar.01.2005,
page 5 of 7
× 100 (%)
Rate of Rise of Off-State Voltage (V/µs)
Gate to Cathode Resistance (kΩ)
Rev.2.00,
Breakover Voltage (RGK = rkΩ)
Breakover Voltage (RGK = 1kΩ)
160
Repetitive Peak Reverse Voltage (Tj = t°C)
Repetitive Peak Reverse Voltage (Tj = 25°C)
Holding Current (RGK = rkΩ)
Holding Current (RGK = 1kΩ)
× 100 (%)
Breakover Voltage (dv/dt = vV/µs)
Breakover Voltage (dv/dt = 1V/µs)
× 100 (%)
Breakover Voltage (Tj = t°C)
Breakover Voltage (Tj = 25°C)
× 100 (%)
Breakover Voltage vs.
Junction Temperature
× 100 (%)
CR02AM-8
160
Typical Example
140
120
100
80
60
40
20
0
–40 –20 0 20 40 60 80 100 120 140 160
Junction Temperature (°C)
CR02AM-8
Gate Trigger Current (tw)
Gate Trigger Current (DC)
× 100 (%)
Gate Trigger Current vs.
Gate Current Pulse Width
103
7
5
4
3
2
#1
Typical Example
IGT(25°C)
# 1 10µA
# 2 # 2 66µA
102
7
5
4
3
2
Tj = 25°C
101
100
2 3 4 5 7 101
2 3 4 5 7 102
Gate Current Pulse Width (µs)
Rev.2.00,
Mar.01.2005,
page 6 of 7
CR02AM-8
Package Dimensions
JEITA Package Code
RENESAS Code
SC-43A
PRSS0003EA-A
Package Name
MASS[Typ.]
TO-92
Unit: mm
0.23g
φ5.0Max
12.5Max
5.0Max
4.4
1.25 1.25
1.3
3.9Max
Circumscribed circle φ0.7
Order Code
Lead form
Standard packing
Quantity
Standard order code
Straight type
Vinyl sack
500 Type name
Lead form
Vinyl sack
500 Type name – Lead forming code
Form A8
Taping
2000 Type name – TB
Note : Please confirm the specification about the shipping in detail.
Rev.2.00,
Mar.01.2005,
page 7 of 7
Standard order
code example
CR02AM-8
CR02AM-8-A6
CR02AM-8-TB
Sales Strategic Planning Div.
Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
Keep safety first in your circuit designs!
1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble
may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage.
Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits,
(ii) use of nonflammable material or (iii) prevention against any malfunction or mishap.
Notes regarding these materials
1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's
application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party.
2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data,
diagrams, charts, programs, algorithms, or circuit application examples contained in these materials.
3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of
publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is
therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product
information before purchasing a product listed herein.
The information described here may contain technical inaccuracies or typographical errors.
Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors.
Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor
home page (http://www.renesas.com).
4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to
evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes
no responsibility for any damage, liability or other loss resulting from the information contained herein.
5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life
is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a
product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater
use.
6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials.
7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and
cannot be imported into a country other than the approved destination.
Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited.
8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein.
http://www.renesas.com
RENESAS SALES OFFICES
Refer to "http://www.renesas.com/en/network" for the latest and detailed information.
Renesas Technology America, Inc.
450 Holger Way, San Jose, CA 95134-1368, U.S.A
Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501
Renesas Technology Europe Limited
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K.
Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900
Renesas Technology Hong Kong Ltd.
7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong Kong
Tel: <852> 2265-6688, Fax: <852> 2730-6071
Renesas Technology Taiwan Co., Ltd.
10th Floor, No.99, Fushing North Road, Taipei, Taiwan
Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999
Renesas Technology (Shanghai) Co., Ltd.
Unit2607 Ruijing Building, No.205 Maoming Road (S), Shanghai 200020, China
Tel: <86> (21) 6472-1001, Fax: <86> (21) 6415-2952
Renesas Technology Singapore Pte. Ltd.
1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632
Tel: <65> 6213-0200, Fax: <65> 6278-8001
© 2005. Renesas Technology Corp., All rights reserved. Printed in Japan.
Colophon .2.0