66285 PHOTOTRANSISTOR SURFACE MOUNT OPTOCOUPLER MICROPAC OPTOELECTRONIC PRODUCTS DIVISION 04/26/06 Features: Applications: • • • • • • • • • • Small size saves real estate Pick and place compatible Military temperature range Solderable construction and terminations Eliminate ground loops Level shifting Line receiver Switching power supplies Motor control Pulse transformer replacement DESCRIPTION The 66285 is designed to be used with both epoxy-based surface mounting and reflow solder mounting techniques. State-of-the-art optocoupler technology is utilized. A high efficiency infrared LED is coupled to a light-sensitive silicon phototransistor. This device is ideal for automated assembly in pick-and-place applications. ABSOLUTE MAXIMUM RATINGS Input to Output Isolation Voltage .................................................................................................................................+1kVdc Collector-Emitter Voltage ................................................................................................................................................. .35V Reverse Input Voltage ........................................................................................................................................................2V Input Diode Continuous Forward Current at (or below) 65°C Free-Air Temperature (see note 1) ............................. 50mA Storage Temperature.................................................................................................................................... -65°C to +150°C Operating Free-Air Temperature Range....................................................................................................... -55°C to +125°C Lead Solder Temperature..............................................................................................................................................245°C Notes: 1. Derate linearly to 125°C free-air temperature at the rate of 0.4 mW/°C above 65°C. Package Dimensions Schematic Diagram 0.095 MAX. SQ. ANODE ID CATHODE COLLECTOR 85° 0.060 MAX. 0.030 0.025 EMITTER ANODE EMITTER 3X 0.025 ANODE 0.008 MAX COLLECTOR 0.008 MAX CATHODE 3X 0.025 MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E.Walnut St., Garland, TX 75040 • (972)272-3571 • Fax (972)487-6918 www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM 66285 PHOTOTRANSISTOR SURFACE MOUNT OPTOCOUPLER 04/26/06 ELECTRICAL CHARACTERISTICS TA = 25°C unless otherwise specified. PARAMETER SYMBOL Input diode Static Reverse Current IR Input Diode Static Reverse Voltage VR Input Diode Static Forward Voltage VF MIN TYP MAX UNITS TEST CONDITIONS 100 µA VR = 2V V IR = 10µA V IF = 20mA 2 1.6 OUTPUT TRANSISTOR TA = 25°C unless otherwise specified. Collector-Emitter Breakdown Voltage V(BR)CEO 35 V IC = 1mA, IB = 0, IF = 0 CTR 50 200 % VCE = 5V, IF = 10mA COUPLED CHARACTERISTICS TA = 25°C unless otherwise specified. Current Transfer Ratio Ta = +25°C -X01 -X02 Off State Collector Current Collector-Emitter Saturation Voltage -X01 -X02 IC(OFF) 50 nA VCE = 20V, IF = 0mA VCE(SAT) VCE(SAT) 0.3 0.3 V V IF = 20mA, IC = 10mA, IB = 0 Rise Time -X01 tr or or Fall Time -X02 tf NOTES: 1. The -001 and -002 are 100% tested at 25°C only. 2. The -101 and -102 are 100% are sample tested at temperature extremes. 3. Custom electrical specifications are available. 10 10 10 µs VCC = 10V, IF = 5mA, RL = 100Ω RECOMMENDED OPERATING CONDITIONS: PARAMETER Input Current, Low Level SYMBOL MIN MAX UNITS IFL 0 100 µA mA Input Current, High Level IFH 1 20 Supply Voltage VCC 5.0 20 V TA -55 125 °C Operating Temperature MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E.Walnut St., Garland, TX 75040 • (972)272-3571 • Fax (972)487-6918 www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM