Plastic Packages for Integrated Circuits Quad Flat No-Lead Plastic Package (QFN) A 44 LEAD QUAD FLAT NO-LEAD PLASTIC PACKAGE (COMPLIANT TO JEDEC MO-220) B N (N-1) (N-2) D 1 2 3 L44.7x7A MILLIMETERS SYMBOL PIN #1 I.D. MARK E (2X) 0.075 C TOP VIEW (2X) (N/2) 0.075 C SEATING PLANE MAX NOTES A 0.80 0.85 0.90 - 0.00 0.02 0.05 - b 0.20 0.25 0.30 - c 0.203 REF - D 7.00 BASIC - D2 5.10 REF 8 E 7.00 BASIC - E2 5.10 REF 8 e 0.10 C e NOMINAL A1 L C MIN 0.50 BASIC 0.50 0.55 0.60 - N 44 REF 4 ND 11 REF 6 NE 11 REF 5 Rev. 1 1/07 0.08 C N LEADS AND EXPOSED PAD NOTES: SEE DETAIL “X” 1. Dimensioning and tolerancing per ASME Y14.5M-1994. SIDE VIEW 2. Tiebar view shown is a non-functional feature. 3. Bottom-side pin #1 I.D. is a diepad chamfer as shown. 4. N is the total number of terminals on the device. b L N LEADS (N-2) (N-1) N 0.01 M C A B PIN #1 I.D. 3 1 2 3 (N/2) NE 5 7 BOTTOM VIEW C A 2 (c) (L) N LEADS A1 DETAIL “X” 1 6. ND is the number of terminals on the “D” side of the package (or X-direction). ND = (N/2)-NE. 7. Inward end of terminal may be square or circular in shape with radius (b/2) as shown. (E2) (D2) 5. NE is the number of terminals on the “E” side of the package (or Y-direction). 8. If two values are listed, multiple exposed pad options are available. Refer to device-specific datasheet. 9. One of 10 packages in MDP0046