600W Single Output Switching Power Supply HEP-600 series Bauar t gepruft Sicherheit egel ma ge od o s be wac g www.tuv.com ID 2000000000 5 ■ Features Universal AC input / Full range (up to 305VAC) Built-in active PFC function No load power consumption <0.5W at remote OFF High efficiency up to 96% Fanless design, cooling by free air convection -40 ~ +70℃ wide operating range Aluminum case and filling with heat-conducted glue Withstand 10G vibration test Output voltage and output current can be adjusted through internal ■ Applications Outdoor telecommunication equipment Outdoor electronic signage and billboard Petroleum plant or mine shaft facility potentiometer Protections: Short circuit / Over current / Over voltage / Over temperature LED indicator for power on Operating altitude up to 5000 meters (Note.7) 6 years warranty ■ Description HEP-600 is a 600W industrial AC/DC power supply featuring the outstanding capability to operate under highly humid, dusty, oily, and high-vibration harsh environment. The entire series is housed with the aluminum case and fully potted with heat-conducted silicone. Thanks to state-of-the-art design, the working efficiency is up to 96%, enabling HEP-600 perfectly work between -40℃ and +70℃ under free air convection. ■ Model Encoding HEP - 600 - 12 Output voltage Output wattage Series name File Name:HEP-600-SPEC 2015-09-18 HEP-600 600W Single Output Switching Power Supply series SPECIFICATION MODEL HEP-600-12 HEP-600-15 HEP-600-20 HEP-600-24 HEP-600-30 HEP-600-36 HEP-600-42 HEP-600-48 HEP-600-54 DC VOLTAGE 12V 15V 20V 24V 36V 42V 48V 54V RATED CURRENT 40A 36A 28A 25A 30V 20A 16.7A 14.3A 12.5A 11.2A RATED POWER 480W 540W 560W 600W 600W 601.2W 600.6W 600W 604.8W 150mVp-p 150mVp-p 150mVp-p 250mVp-p 250mVp-p 250mVp-p RIPPLE & NOISE (max.) Note.2 150mVp-p VOLTAGE ADJ. RANGE OUTPUT Can be adjusted by internal potentiometer CURRENT ADJ. RANGE 18 ~ 36A 14 ~ 28A 12.5 ~ 25A 10 ~ 20A 8.3 ~ 16.7A 7.1 ~ 14.3A 6.2 ~ 12.5A 5.6 ~ 11.2A VOLTAGE TOLERANCE Note.3 ±3.0% ±2.0% ±1.5% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±1.0% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% 95.5% 96% 96% 96% 20 ~ 40A LINE REGULATION LOAD REGULATION SETUP, RISE TIME ±1.5% ±2.0% Note.5 500ms, 80ms at full load HOLD UP TIME (Typ.) VOLTAGE RANGE INPUT PROTECTION 350mVp-p 20.4 ~ 25.2V 25.5 ~ 31.5V 30.6 ~ 37.8V 35.7 ~ 44.1V 40.8 ~ 50.4V 45.9 ~ 56.7V 10.2 ~ 12.6V 12.7 ~ 15.8V 17 ~ 21V 200mVp-p 15ms at full load Note.4 90 ~ 305VAC 230VAC /115VAC 230VAC /115VAC 127 ~ 431VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.98/115VAC, PF>0.95/230VAC, PF>0.93/277VAC at full load EFFICIENCY (Typ.) 93% AC CURRENT (Typ.) INRUSH CURRENT(Typ.) 95% 95.5% 94% 95% 7A / 115VAC 3.3A / 230VAC 2.9A / 277VAC COLD START 70A(twidth=1000μs measured at 50% Ipeak) at 230VAC LEAKAGE CURRENT <0.75mA / 277VAC OVER CURRENT 105 ~ 125% SHORT CIRCUIT Constant current limiting, recovers automatically after fault condition is removed 32.5 ~ 36.5V 39.5 ~ 43.5V 46 ~ 50V 13 ~ 16V 16.5 ~ 20.5V 22 ~ 26V 26 ~ 30V OVER VOLTAGE Protection type : Constant current limiting, recovers automatically after fault condition is removed 52.5 ~ 56.5V 59 ~ 63V Protection type : Shut down o/p voltage, re-power on to recover Shut down o/p voltage, re-power on to recover OVER TEMPERATURE Power off : "Low" <0 ~ 0.5V or Short circuit REMOTE ON/OFF CONTROL Power on : "Hi" >2 ~ 5V or Open circuit FUNCTION 5VSB : [email protected] ; tolerance ±5%, ripple : 100mVp-p(max.) 5V STANDBY WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS -40 ~ +70℃ (Refer to "Derating Curve") 20 ~ 95% RH non-condensing -40 ~ +85℃, 10 ~ 95% RH ±0.03%/℃ (0 ~ 60℃) 20 ~ 500Hz, 10G 12min./1cycle, period for 72min. each along X, Y, Z axes UL60950-1, TUV EN60950-1 approved SAFETY & WITHSTAND VOLTAGE I/P-O/P:3.75KVAC EMC (Note.6) I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY MTBF OTHERS DIMENSION PACKING NOTE I/P-FG:2KVAC O/P-FG:1.5KVAC Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, heavy industry level, criteria A 76.9K hrs min. MIL-HDBK-217F (25℃) 280*144*48.5mm (L*W*H) 3.9Kg; 4pcs/16.6Kg/0.9CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Derating may be needed under low input voltages. Please check the static characteristics for more details. 5. Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set up time. 6. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. (as available on http://www.meanwell.com) 7. The ambient temperature derating of 3.5℃/1000m is needed for operating altitude greater than 2000m(6500ft). File Name:HEP-600-SPEC 2015-09-18 HEP-600 600W Single Output Switching Power Supply series Block Diagram fosc : 70KHz +5VSB DETECTION CIRCUIT EMI FILTER & RECTIFIERS I/P POWER SWITCHING PWM CONTROL RECTIFIERS & FILTER +5VSB POWER SWITCHING RECTIFIERS & FILTER +V -V PFC CIRCUIT O.L.P. FG O.L.P. DETECTION CIRCUIT PWM & PFC CONTROL PFC CONTROL O.V.P. PS/ON CONTROL Derating Curve PS/ON Static Characteristics 100 100 90 80 80 70 LOAD (%) LOAD (%) 60 40 20 -40 -25 -10 0 15 30 50 55 60 AMBIENT TEMPERATURE (℃) 70 (HORIZONTAL) 60 50 40 90 115 125 135 145 155 165 175 180 200 230 305 INPUT VOLTAGE (V) 60Hz File Name:HEP-600-SPEC 2015-09-18 HEP-600 600W Single Output Switching Power Supply Mechanical Specification Case No. 228A series Unit:mm 280 13.4 8.9 253.2 15 7 5.7 1 4 144 3 126.6 6 Io Vo ADJ. ADJ. 47 ψ4.5×4PL ψ6×4PL O/P 7 LED 7 15 5 T case 9.25 9.25 11 3 2 11 I/P 97 2 1 268.6 5.7 ※ T case: Max. Case Temperature. 21max. 48.5 21max. ※ Output voltage and constant current level can be adjusted through internal potentiometer. (Can access by removing the rubber stopper on the case.) AC Input Terminal Pin No. Assignment Pin No. 1 2 3 Assignment FG AC/L AC/N DC Output Terminal Pin No. Assignment Pin No. 1 2 3 Assignment RC+ RC- & GND +5V SB Pin No. 4,5 6,7 Assignment -V +V Installation Manual Please refer to : http://www.meanwell.com/webnet/search/InstallationSearch.html File Name:HEP-600-SPEC 2015-09-18