DISCRETE SEMICONDUCTORS DATA SHEET M3D096 BLF245B VHF push-pull power MOS transistor Product specification Supersedes data of 1998 Jan 08 2000 Oct 17 Philips Semiconductors Product specification VHF push-pull power MOS transistor FEATURES BLF245B PIN CONFIGURATION • High power gain • Easy power control • Good thermal stability • Gold metallization ensures excellent reliability. 1 fpage 4 d2 g2 5 DESCRIPTION Dual push-pull silicon N-channel enhancement mode vertical D-MOS transistor designed for large signal amplifier applications in the VHF frequency range. The transistor is encapsulated in a 4-lead, SOT279 balanced flange envelope, with a ceramic cap. The mounting flange provides the common source connection for the transistors. Top view 2 d1 3 MSB018 MBB157 Fig.1 Simplified outline and symbol. CAUTION The device is supplied in an antistatic package. The gate-source input must be protected against static charge during transport and handling. PINNING - SOT279 PIN DESCRIPTION 1 drain 1 2 gate 1 3 gate 2 4 drain 2 5 source s g1 WARNING Product and environmental safety - toxic materials This product contains beryllium oxide. The product is entirely safe provided that the BeO disc is not damaged. All persons who handle, use or dispose of this product should be aware of its nature and of the necessary safety precautions. After use, dispose of as chemical or special waste according to the regulations applying at the location of the user. It must never be thrown out with the general or domestic waste. QUICK REFERENCE DATA RF performance at Th = 25 °C in a push-pull common source test circuit. MODE OF OPERATION CW, class-B 2000 Oct 17 f (MHz) VDS (V) PL (W) Gp (dB) ηD (%) 175 28 30 > 14 > 55 2 Philips Semiconductors Product specification VHF push-pull power MOS transistor BLF245B LIMITING VALUES In accordance with the Absolute Maximum System (IEC 60134). Per transistor section unless otherwise specified. SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT VDS drain-source voltage − 65 V ±VGS gate-source voltage − 20 V ID DC drain current Ptot total power dissipation Tstg storage temperature Tj junction temperature − 4.5 A up to Tmb = 25 °C; total device; − both sections equally loaded 75 W −65 +150 °C − 200 °C THERMAL CHARACTERISTICS SYMBOL PARAMETER CONDITIONS VALUE UNIT Rth j-mb thermal resistance from junction to mounting base total device; both sections equally loaded 2.3 K/W Rth mb-h thermal resistance from mounting base to heatsink total device; both sections equally loaded 0.3 K/W MRA922 102 handbook, halfpage MRA929 120 handbook, halfpage ID (A) Ptot (W) 10 80 (2) (1) (1) (2) 40 1 10−1 1 10 VDS (V) 0 102 0 (1) Current in this area may be limited by RDS(on). (2) Tmb = 25 °C. Total device; both sections equally loaded. 80 120 Th (oC) 160 (1) Continuous operation. (2) Short-time operation during mismatch. Total device; both sections equally loaded. Fig.2 DC SOAR. 2000 Oct 17 40 Fig.3 Power/temperature derating curves. 3 Philips Semiconductors Product specification VHF push-pull power MOS transistor BLF245B CHARACTERISTICS (per section) Tj = 25 °C unless otherwise specified. SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT V(BR)DSS drain-source breakdown voltage ID = 5 mA; VGS = 0 65 − − V IDSS drain-source leakage current VGS = 0; VDS = 28 V − − 1 mA IGSS gate-source leakage current ±VGS = 20 V; VDS = 0 − − 1 µA VGS(th) gate-source threshold voltage ID = 5 mA; VDS = 10 V 2 − 4.5 V gfs forward transconductance ID = 0.75 A; VDS = 10 V 600 850 − mS RDS(on) drain-source on-state resistance ID = 0.75 A; VGS = 10 V − 0.8 1.5 Ω IDSX on-state drain current VGS = 10 V; VDS = 10 V − 5 − A Cis input capacitance VGS = 0; VDS = 28 V; f = 1 MHz − 60 − pF Cos output capacitance VGS = 0; VDS = 28 V; f = 1 MHz − 40 − pF Crs feedback capacitance VGS = 0; VDS = 28 V; f = 1 MHz − 4.5 − pF MGP180 MGP181 6 2 handbook, halfpage handbook, halfpage T.C. (mV/K) Tj = 25 °C ID (A) 0 125 °C 4 −2 −4 2 −6 −8 0 1 10 102 ID (mA) 0 103 VDS = 10 V. Fig.4 8 12 VGS (V) 16 VDS = 10 V. Temperature coefficient of gate-source voltage as a function of drain current; typical values per section. 2000 Oct 17 4 Fig.5 4 Drain current as a function of gate-source voltage; typical values per section. Philips Semiconductors Product specification VHF push-pull power MOS transistor BLF245B MGP182 2 MGP183 160 handbook, halfpage handbook, halfpage C (pF) RDS(on) (Ω) 120 1 80 Cis Cos 40 0 0 0 40 80 120 Tj (°C) 160 0 Drain-source on-state resistance as a function of junction temperature; typical values per section. Fig.7 MGP184 20 handbook, halfpage Crs (pF) 10 0 0 10 20 30 VDS (V) 40 VGS = 0; f = 1 MHz. Fig.8 Feedback capacitance as a function of drain-source voltage; typical values per section. 2000 Oct 17 20 30 VDS (V) 40 VGS = 0; f = 1 MHz. ID = 0.75 A; VGS = 10 V. Fig.6 10 5 Input and output capacitance as functions of drain-source voltage; typical values per section. Philips Semiconductors Product specification VHF push-pull power MOS transistor BLF245B APPLICATION INFORMATION FOR CLASS-B OPERATION Th = 25 °C; Rth mb-h = 0.3 K/W; unless otherwise specified. RF performance in a push-pull, common source, class-B test circuit. MODE OF OPERATION CW, class-B f (MHz) VDS (V) IDQ (mA) PL (W) Gp (dB) ηD (%) 175 28 2 × 25 30 > 14 typ. 18 > 55 typ. 65 Ruggedness in class-B operation The BLF245B is capable of withstanding a load mismatch corresponding to VSWR = 50 through all phases, under the following conditions: VDS = 28 V, f = 175 MHz at rated output power. MGP185 20 Gp handbook, halfpage Gp PL (W) ηD (dB) 15 MGP186 40 handbook, halfpage 80 30 60 ηD 10 40 5 20 0 20 10 0 0 0 10 20 30 PL (W) 0 40 0.5 1.0 1.5 PIN (W) 2.0 Class-B operation; VDS = 28 V; IDQ = 2 × 25 mA; ZL = 8.8 + j12.7 Ω; f = 175 MHz. Class-B operation; VDS = 28 V; IDQ = 2 × 25 mA; ZL = 8.8 + j12.7 Ω; f = 175 MHz. Fig.9 Fig.10 Load power as a function of input power; typical values. Power gain and efficiency as functions of output power; typical values. 2000 Oct 17 6 Philips Semiconductors Product specification VHF push-pull power MOS transistor R5 +VG handbook, full pagewidth R3 BLF245B +VD C11 C12 C13 C7 L10 C8 C14 R7 C15 R1 D.U.T. L1 50 Ω input L4 C1 C3 L2 C4 L6 C5 L8 C6 L14 L16 L12 C27 C25 L18 C21 C22 C23 C24 L21 50 Ω output C26 C2 L3 L20 L5 L7 L13 L9 L17 L19 L22 L15 C16 R2 C17 R8 C10 L11 C9 C18 C19 C20 +VG R6 MGP187 R4 f = 175 MHz. +VD Fig.11 Test circuit for class-B operation. List of components (see Fig.11) COMPONENT DESCRIPTION VALUE C1,C2 multilayer ceramic chip capacitor; note 1 270 pF C3 multilayer ceramic chip capacitor; note 1 24 pF C4 film dielectric trimmer 4 to 60 pF C5, C25, C26 multilayer ceramic chip capacitor; note 1 91 pF C6, C22, C24 film dielectric trimmer 5 to 60 pF 2000 Oct 17 7 DIMENSIONS CATALOGUE NO. 2222 809 08002 2222 809 08003 Philips Semiconductors Product specification VHF push-pull power MOS transistor COMPONENT BLF245B DESCRIPTION VALUE DIMENSIONS C7, C9, C12, C14, C17, C19 multilayer ceramic chip capacitor 100 nF C8, C10 multilayer ceramic chip capacitor; note 1 680 pF C11, C20 multilayer ceramic chip capacitor 10 nF C13, C18 electrolytic capacitor 10 µF, 63 V C15, C16 multilayer ceramic chip capacitor; note 1 100 pF C21, C27 multilayer ceramic chip capacitor; note 1 75 pF C23 multilayer ceramic chip capacitor; note 1 36 pF L1, L3, L20, L22 stripline; note 2 55 Ω length 111 mm width 2.5 mm L2, L21 semi-rigid cable 50 Ω length 111 mm ext. dia. 2.2 mm L4, L5 stripline; note 2 49.5 Ω length 28 mm width 3 mm L6, L7 stripline; note 2 49.5 Ω length 22.5 mm width 3 mm L8, L9 stripline; note 2 49.5 Ω length 4.5 mm width 3 mm L10, L11 grade 3B Ferroxcube RF choke L12, L13 stripline; note 2 49.5 Ω length 21 mm width 3 mm L14, L15 4 turns enamelled 1 mm copper wire 70 nH length 9 mm int. dia. 6 mm leads 2 × 5 mm L16, L17 stripline; note 2 49.5 Ω length 30 mm width 3 mm L18, L19 stripline; note 2 49.5 Ω length 26 mm width 3 mm R1, R2 0.4 W metal film resistor 10 Ω R3, R4 10 turns potentiometer 50 Ω R5, R6 0.4 W metal film resistor 205 kΩ R7, R8 0.4 W metal film resistor 10 Ω CATALOGUE NO. 2222 852 47104 2222 852 47103 4312 020 36642 Notes 1. American Technical Ceramics (ATC) capacitor, type 100B or other capacitor of the same quality. 2. The striplines are on a double copper-clad printed circuit board, with epoxy glass dielectric (εr = 4.5), thickness 1⁄16 inch. The other side of the board is fully metallized and used as a ground plane. The ground planes on each side of the board are connected together by means of copper straps and hollow rivets. 2000 Oct 17 8 Philips Semiconductors Product specification VHF push-pull power MOS transistor BLF245B 200 mm handbook, full pagewidth rivet rivet copper strap copper strap copper strap copper strap rivet rivet copper strap 110 mm copper strap copper strap copper strap rivet rivet MBA377 +VG +VD handbook, full pagewidth C11 L10 L1 + L2 C15 C14 C1 C3 C5 L4 L5 C2 C4 R7 L16 C25 C23 L18 L19 C24 C26 L12 C21 L8 L9 L13 C22 L17 C10 C9 L15 C16 C17 R8 L11 L3 L21 + L22 C18 C19 +VG C20 +VD The circuit and components are situated on one side of the epoxy fibre-glass board, the other side being fully metallized to serve as a ground. Earth connections are made by means of copper straps and hollow rivets for a direct contact between the upper and lower sheets. Fig.12 Component layout for 175 MHz test circuit. 2000 Oct 17 L20 C13 L14 C7 C8 R1 L6 C27 L7 C6 R2 C12 9 MBA378 Philips Semiconductors Product specification VHF push-pull power MOS transistor BLF245B MGP188 10 MGP189 30 handbook, halfpage handbook, halfpage Zi (Ω) ZL (Ω) 5 ri 20 xi 10 0 XL −5 −10 RL 0 0 100 200 300 f (MHz) 400 0 100 200 300 f (MHz) 400 Class-B operation; VDS = 28 V; IDQ = 2 × 25 mA; RGS = 10 Ω; PL = 30 W (total device). Class-B operation; VDS = 28 V; IDQ = 2 × 25 mA; RGS = 10 Ω; PL = 30 W (total device). Fig.13 Input impedance as a function of frequency (series components), typical values per section. Fig.14 Load impedance as a function of frequency (series components), typical values per section. MGP190 25 Gp handbook, halfpage (dB) 20 15 handbook, halfpage 10 5 Zi ZL MBA379 0 0 100 200 300 f (MHz) 400 Class-B operation; VDS = 28 V; IDQ = 2 × 25 mA; RGS = 10 Ω; PL = 30 W (total device). Fig.16 Power gain as a function of frequency, typical values per section. Fig.15 Definition of MOS impedance. 2000 Oct 17 10 Philips Semiconductors Product specification VHF push-pull power MOS transistor BLF245B PACKAGE OUTLINE Flanged double-ended ceramic package; 2 mounting holes; 4 leads SOT279A D A F 5 D1 U1 B q C w2 M C M H1 1 c 4 E1 H U2 E A 2 w1 M A M B M p 3 w3 M b Q e 0 5 10 mm scale DIMENSIONS (millimetre dimensions are derived from the original inch dimensions) UNIT A b c D D1 E E1 e F H H1 p Q q U1 U2 w1 w2 w3 mm 6.84 6.01 1.65 1.40 0.15 0.10 9.25 9.04 9.27 9.02 5.94 5.74 5.97 5.72 3.05 3.05 2.54 12.96 11.94 4.96 4.19 3.48 3.23 4.34 4.04 18.42 24.90 24.64 5.97 5.72 0.25 0.51 0.25 inches 0.269 0.065 0.006 0.364 0.365 0.234 0.235 0.120 0.510 0.195 0.137 0.171 0.980 0.235 0.725 0.010 0.020 0.010 0.120 0.237 0.055 0.004 0.356 0.355 0.226 0.225 0.100 0.470 0.165 0.127 0.159 0.970 0.225 OUTLINE VERSION REFERENCES IEC JEDEC EIAJ SOT279A 2000 Oct 17 EUROPEAN PROJECTION ISSUE DATE 99-03-29 11 Philips Semiconductors Product specification VHF push-pull power MOS transistor BLF245B DATA SHEET STATUS DATA SHEET STATUS PRODUCT STATUS DEFINITIONS (1) Objective specification Development This data sheet contains the design target or goal specifications for product development. Specification may change in any manner without notice. Preliminary specification Qualification This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Product specification Production This data sheet contains final specifications. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Note 1. Please consult the most recently issued data sheet before initiating or completing a design. DEFINITIONS DISCLAIMERS Short-form specification The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Limiting values definition Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Right to make changes Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no licence or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Application information Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. 2000 Oct 17 12 Philips Semiconductors Product specification VHF push-pull power MOS transistor BLF245B NOTES 2000 Oct 17 13 Philips Semiconductors Product specification VHF push-pull power MOS transistor BLF245B NOTES 2000 Oct 17 14 Philips Semiconductors Product specification VHF push-pull power MOS transistor BLF245B NOTES 2000 Oct 17 15 Philips Semiconductors – a worldwide company Argentina: see South America Australia: 3 Figtree Drive, HOMEBUSH, NSW 2140, Tel. +61 2 9704 8141, Fax. +61 2 9704 8139 Austria: Computerstr. 6, A-1101 WIEN, P.O. Box 213, Tel. +43 1 60 101 1248, Fax. +43 1 60 101 1210 Belarus: Hotel Minsk Business Center, Bld. 3, r. 1211, Volodarski Str. 6, 220050 MINSK, Tel. +375 172 20 0733, Fax. +375 172 20 0773 Belgium: see The Netherlands Brazil: see South America Bulgaria: Philips Bulgaria Ltd., Energoproject, 15th floor, 51 James Bourchier Blvd., 1407 SOFIA, Tel. +359 2 68 9211, Fax. +359 2 68 9102 Canada: PHILIPS SEMICONDUCTORS/COMPONENTS, Tel. +1 800 234 7381, Fax. +1 800 943 0087 China/Hong Kong: 501 Hong Kong Industrial Technology Centre, 72 Tat Chee Avenue, Kowloon Tong, HONG KONG, Tel. +852 2319 7888, Fax. +852 2319 7700 Colombia: see South America Czech Republic: see Austria Denmark: Sydhavnsgade 23, 1780 COPENHAGEN V, Tel. +45 33 29 3333, Fax. +45 33 29 3905 Finland: Sinikalliontie 3, FIN-02630 ESPOO, Tel. +358 9 615 800, Fax. +358 9 6158 0920 France: 51 Rue Carnot, BP317, 92156 SURESNES Cedex, Tel. +33 1 4099 6161, Fax. +33 1 4099 6427 Germany: Hammerbrookstraße 69, D-20097 HAMBURG, Tel. +49 40 2353 60, Fax. +49 40 2353 6300 Hungary: see Austria India: Philips INDIA Ltd, Band Box Building, 2nd floor, 254-D, Dr. Annie Besant Road, Worli, MUMBAI 400 025, Tel. +91 22 493 8541, Fax. +91 22 493 0966 Indonesia: PT Philips Development Corporation, Semiconductors Division, Gedung Philips, Jl. Buncit Raya Kav.99-100, JAKARTA 12510, Tel. +62 21 794 0040 ext. 2501, Fax. +62 21 794 0080 Ireland: Newstead, Clonskeagh, DUBLIN 14, Tel. +353 1 7640 000, Fax. +353 1 7640 200 Israel: RAPAC Electronics, 7 Kehilat Saloniki St, PO Box 18053, TEL AVIV 61180, Tel. +972 3 645 0444, Fax. +972 3 649 1007 Italy: PHILIPS SEMICONDUCTORS, Via Casati, 23 - 20052 MONZA (MI), Tel. +39 039 203 6838, Fax +39 039 203 6800 Japan: Philips Bldg 13-37, Kohnan 2-chome, Minato-ku, TOKYO 108-8507, Tel. +81 3 3740 5130, Fax. +81 3 3740 5057 Korea: Philips House, 260-199 Itaewon-dong, Yongsan-ku, SEOUL, Tel. +82 2 709 1412, Fax. +82 2 709 1415 Malaysia: No. 76 Jalan Universiti, 46200 PETALING JAYA, SELANGOR, Tel. +60 3 750 5214, Fax. +60 3 757 4880 Mexico: 5900 Gateway East, Suite 200, EL PASO, TEXAS 79905, Tel. +9-5 800 234 7381, Fax +9-5 800 943 0087 Middle East: see Italy Netherlands: Postbus 90050, 5600 PB EINDHOVEN, Bldg. VB, Tel. +31 40 27 82785, Fax. +31 40 27 88399 New Zealand: 2 Wagener Place, C.P.O. Box 1041, AUCKLAND, Tel. +64 9 849 4160, Fax. +64 9 849 7811 Norway: Box 1, Manglerud 0612, OSLO, Tel. +47 22 74 8000, Fax. +47 22 74 8341 Pakistan: see Singapore Philippines: Philips Semiconductors Philippines Inc., 106 Valero St. Salcedo Village, P.O. Box 2108 MCC, MAKATI, Metro MANILA, Tel. +63 2 816 6380, Fax. +63 2 817 3474 Poland: Al.Jerozolimskie 195 B, 02-222 WARSAW, Tel. +48 22 5710 000, Fax. +48 22 5710 001 Portugal: see Spain Romania: see Italy Russia: Philips Russia, Ul. Usatcheva 35A, 119048 MOSCOW, Tel. +7 095 755 6918, Fax. +7 095 755 6919 Singapore: Lorong 1, Toa Payoh, SINGAPORE 319762, Tel. +65 350 2538, Fax. +65 251 6500 Slovakia: see Austria Slovenia: see Italy South Africa: S.A. PHILIPS Pty Ltd., 195-215 Main Road Martindale, 2092 JOHANNESBURG, P.O. Box 58088 Newville 2114, Tel. +27 11 471 5401, Fax. +27 11 471 5398 South America: Al. Vicente Pinzon, 173, 6th floor, 04547-130 SÃO PAULO, SP, Brazil, Tel. +55 11 821 2333, Fax. +55 11 821 2382 Spain: Balmes 22, 08007 BARCELONA, Tel. +34 93 301 6312, Fax. +34 93 301 4107 Sweden: Kottbygatan 7, Akalla, S-16485 STOCKHOLM, Tel. +46 8 5985 2000, Fax. +46 8 5985 2745 Switzerland: Allmendstrasse 140, CH-8027 ZÜRICH, Tel. +41 1 488 2741 Fax. +41 1 488 3263 Taiwan: Philips Semiconductors, 5F, No. 96, Chien Kuo N. Rd., Sec. 1, TAIPEI, Taiwan Tel. +886 2 2134 2451, Fax. +886 2 2134 2874 Thailand: PHILIPS ELECTRONICS (THAILAND) Ltd., 60/14 MOO 11, Bangna Trad Road KM. 3, Bagna, BANGKOK 10260, Tel. +66 2 361 7910, Fax. +66 2 398 3447 Turkey: Yukari Dudullu, Org. San. Blg., 2.Cad. Nr. 28 81260 Umraniye, ISTANBUL, Tel. +90 216 522 1500, Fax. +90 216 522 1813 Ukraine: PHILIPS UKRAINE, 4 Patrice Lumumba str., Building B, Floor 7, 252042 KIEV, Tel. +380 44 264 2776, Fax. +380 44 268 0461 United Kingdom: Philips Semiconductors Ltd., 276 Bath Road, Hayes, MIDDLESEX UB3 5BX, Tel. +44 208 730 5000, Fax. +44 208 754 8421 United States: 811 East Arques Avenue, SUNNYVALE, CA 94088-3409, Tel. +1 800 234 7381, Fax. +1 800 943 0087 Uruguay: see South America Vietnam: see Singapore Yugoslavia: PHILIPS, Trg N. Pasica 5/v, 11000 BEOGRAD, Tel. +381 11 3341 299, Fax.+381 11 3342 553 For all other countries apply to: Philips Semiconductors, Marketing Communications, Building BE-p, P.O. Box 218, 5600 MD EINDHOVEN, The Netherlands, Fax. +31 40 27 24825 Internet: http://www.semiconductors.philips.com SCA 70 © Philips Electronics N.V. 2000 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Printed in The Netherlands 613524/05/pp16 Date of release: 2000 Oct 17 Document order number: 9397 750 07432