To our customers, Old Company Name in Catalogs and Other Documents On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology Corporation, and Renesas Electronics Corporation took over all the business of both companies. Therefore, although the old company name remains in this document, it is a valid Renesas Electronics document. We appreciate your understanding. Renesas Electronics website: http://www.renesas.com April 1st, 2010 Renesas Electronics Corporation Issued by: Renesas Electronics Corporation (http://www.renesas.com) Send any inquiries to http://www.renesas.com/inquiry. Notice 1. 2. 3. 4. 5. 6. 7. All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. When exporting the products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas Electronics products or the technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. Renesas Electronics products are classified according to the following three quality grades: “Standard”, “High Quality”, and “Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise expressly specified in a Renesas Electronics data sheets or data books, etc. “Standard”: 8. 9. 10. 11. 12. Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots. “High Quality”: Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anticrime systems; safety equipment; and medical equipment not specifically designed for life support. “Specific”: Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas Electronics. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. (Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majorityowned subsidiaries. (Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics. DATA SHEET Solid State Relay OCMOS FET PS7241E-1A 4-PIN SOP 400 V BREAK DOWN VOLTAGE NORMALLY OPEN TYPE −NEPOC Series− 1-ch Optical Coupled MOS FET DESCRIPTION The PS7241E-1A is an optically coupled element that combines a GaAs infrared LED on the input side with a normally-open MOS FET on the output side to realize an excellent cost performance. The small, thin package and high sensitivity of this element makes it ideal for battery-driven mobile devices, and its small offset voltage at power-on and good linearity are also make it suitable for controlling micro analog signals. FEATURES PIN CONNECTION • Small and thin package (4-pin SOP, Height = 2.1 mm) (Top View) • 1 channel type (1 a output) • Designed for AC/DC switching line changer 4 3 • Low offset voltage <R> 1. LED Anode 2. LED Cathode 3. MOS FET 4. MOS FET • Ordering number of taping product: PS7241E-1A-E3, E4: 900 pcs/reel : PS7241E-1A-F3, F4: 3 500 pcs/reel • Pb-Free product • Safety standards 1 2 • UL approved: No. E72422 • BSI approved: No. 8241/8242 APPLICATIONS • Laptop PC, PDA • Modem card • Telephone, FAX • Measurement equipment The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. Document No. PN10459EJ04V0DS (4th edition) Date Published January 2010 NS Printed in Japan The mark <R> shows major revised points. The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field. 2004, 2010 PS7241E-1A PACKAGE DIMENSIONS (UNIT: mm) 4.0±0.5 3 1 2 7.0±0.3 4.4 0.05+0.08 –0.05 2.05+0.08 –0.05 0.15+0.10 –0.05 4 <R> 0.5±0.3 2.54 0.40+0.10 –0.05 0.25 M PHOTOCOUPLER CONSTRUCTION Parameter Unit (MIN.) Air Distance 5 mm Outer Creepage Distance 5 mm Isolation Distance <R> 0.4 mm MARKING EXAMPLE 41EA N 031 No. 1 pin Mark Initial of NEC (Engraved mark) Assembly Lot N *1 N 0 31 Week Assembled Year Assembled (Last 1 Digit) Rank Code *1 2 Bar : Pb-Free Data Sheet PN10459EJ04V0DS PS7241E-1A ORDERING INFORMATION Part Number Order Number Solder Plating Packing Style Safety Standard Application Part Approval Number Specification PS7241E-1A PS7241E-1A-A Pb-Free PS7241E-1A-E3 PS7241E-1A-E3-A PS7241E-1A-E4 PS7241E-1A-E4-A PS7241E-1A-F3 PS7241E-1A-F3-A PS7241E-1A-F4 PS7241E-1A-F4-A Magazine case 100 pcs Standard products Embossed Tape 900 pcs/reel (UL, BSI approved) *1 PS7241E-1A Embossed Tape 3 500 pcs/reel *1 For the application of the Safety Standard, following part number should be used. ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified) Parameter Diode Symbol Ratings Unit Forward Current (DC) IF 50 mA Reverse Voltage VR 5.0 V PD 50 mW IFP 1 A Break Down Voltage VL 400 V Continuous Load Current Power Dissipation Peak Forward Current MOS FET *1 IL 120 mA Pulse Load Current (AC/DC Connection) ILP 240 mA Power Dissipation PD 300 mW BV 1 500 Vr.m.s. Total Power Dissipation PT 350 mW Operating Ambient Temperature TA −40 to +85 °C Storage Temperature Tstg −40 to +100 °C *2 Isolation Voltage *3 *1 PW = 100 μs, Duty Cycle = 1% *2 PW = 100 ms, 1 shot *3 AC voltage for 1 minute at TA = 25°C, RH = 60% between input and output. Pins 1-2 shorted together, 3-4 shorted together. Data Sheet PN10459EJ04V0DS 3 PS7241E-1A RECOMMENDED OPERATING CONDITIONS (TA = 25°C) Parameter Symbol MIN. TYP. MAX. Unit LED Operating Current IF 4 10 20 mA LED Off Voltage VF 0 0.5 V ELECTRICAL CHARACTERISTICS (TA = 25°C) Parameter Diode MOS FET Symbol Conditions MIN. TYP. MAX. Unit 1.2 1.4 V Forward Voltage VF IF = 10 mA Reverse Current IR VR = 5 V 5.0 μA Off-state Leakage ILoff VD = 400 V 1.0 μA Output Capacitance Cout VD = 0 V, f = 1 MHz LED On-state Current IFon IL = 120 mA On-state Resistance Ron1 IF = 10 mA, IL = 10 mA Current <R> Coupled <R> 50 pF 4.0 mA 22 30 Ω Ron2 IF = 10 mA, IL = 120 mA, t ≤ 10 ms 17 23 *1, 2 ton IF = 10 mA, VO = 5 V, RL = 500 Ω, 0.5 1.0 *1, 2 toff PW ≥ 10 ms 0.07 0.2 Turn-on Time Turn-off Time Isolation Resistance RI-O VI-O = 1.0 kVDC Isolation Capacitance CI-O V = 0 V, f = 1 MHz 10 ms Ω 9 0.5 pF *1 Test Circuit for Switching Time IF Pulse Input VL 50% Input 0 VO = 5 V Input monitor 90% VO monitor Output Rin RL 10% ton toff *2 The turn-on time and turn-off time are specified as input-pulse width ≥ 10 ms. Be aware that when the device operates with an input-pulse width less than 10 ms, the turn-on time and turn-off time will increase. 4 Data Sheet PN10459EJ04V0DS PS7241E-1A TYPICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified) MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE MAXIMUM LOAD CURRENT vs. AMBIENT TEMPERATURE 300 Maximum Load Current IL (mA) Maximum Forward Current IF (mA) 100 80 60 40 20 0 –25 0 25 75 85 50 200 100 0 –25 100 0 25 75 85 50 Ambient Temperature TA (°C) Ambient Temperature TA (°C) FORWARD VOLTAGE vs. AMBIENT TEMPERATURE OUTPUT CAPACITANCE vs. APPLIED VOLTAGE 1.8 100 200 1.6 1.4 Output Capacitance Cout (pF) Forward Voltage VF (V) f = 1 MHz IF = 50 mA 30 mA 20 mA 10 mA 5 mA 1 mA 1.2 1.0 0.8 –25 0 25 50 75 150 100 50 0 100 20 40 80 100 120 Ambient Temperature TA (°C) Applied Voltage VD (V) OFF-STATE LEAKAGE CURRENT vs. APPLIED VOLTAGE LOAD CURRENT vs. LOAD VOLTAGE 10–6 200 IF = 10 mA TA = 85°C –7 10 Load Current IL (mA) Off-state Leakage Current ILoff (A) 60 10–8 10–9 25°C 10 –10 100 –4.0 –2.0 0 2.0 4.0 –100 10–11 10–12 0 100 200 300 400 500 –200 Load Voltage VL (V) Applied Voltage VD (V) Remark The graphs indicate nominal characteristics. Data Sheet PN10459EJ04V0DS 5 PS7241E-1A ON-STATE RESISTANCE vs. AMBIENT TEMPERATURE 30 25 20 15 10 5 0 –50 1 000 900 Turn-on Time ton (μ s) On-state Resistance Ron2 (Ω) 35 40 IF = 10 mA, IL = 10 mA 800 –25 0 25 50 75 30 25 20 15 10 5 –25 0 25 50 75 Ambient Temperature TA (°C) TURN-ON TIME vs. AMBIENT TEMPERATURE TURN-OFF TIME vs. AMBIENT TEMPERATURE 200 IF = 10 mA, VL = 5 V, RL = 500 Ω 600 500 400 300 160 140 120 100 80 60 200 40 100 20 –25 0 25 50 75 0 –50 100 100 IF = 10 mA, VL = 5 V, RL = 500 Ω 180 –25 0 25 50 75 100 Ambient Temperature TA (°C) Ambient Temperature TA (°C) TURN-ON TIME vs. FORWARD CURRENT TURN-OFF TIME vs. FORWARD CURRENT 3.0 0.30 VL = 5 V, RL = 500 Ω 2.0 TA = +85°C 1.5 +25°C –40°C 1.0 0.5 0 VL = 5 V, RL = 500 Ω 0.25 Turn-off Time toff (ms) 2.5 0.20 TA = –40°C 0.15 0.10 +25°C +85°C 0.05 5 10 15 20 25 0 5 10 15 Forward Current IF (mA) Forward Current IF (mA) Remark The graphs indicate nominal characteristics. 6 IF = 10 mA, IL = 120 mA Ambient Temperature TA (°C) 700 0 –50 Turn-on Time ton (ms) 35 0 –50 100 Turn-off Time toff (μs) On-state Resistance Ron1 (Ω) 40 ON-STATE RESISTANCE vs. AMBIENT TEMPERATURE Data Sheet PN10459EJ04V0DS 20 25 PS7241E-1A ON-STATE RESISTANCE DISTRIBUTION ON-STATE RESISTANCE DISTRIBUTION 30 30 n = 50 pcs, IF = 10 mA, IL = 10 mA 20 25 Number (pcs) Number (pcs) 25 15 10 5 0 n = 50 pcs, IF = 10 mA, IL = 120 mA 20 15 10 5 21.6 21.8 22 22.2 22.4 22.6 22.8 0 23 17 On-state Resistance Ron1 (Ω) 25 20 15 30 25 20 15 10 5 5 0.2 0.3 0.4 0.5 0.6 18 0.7 n = 50 pcs, IF = 10 mA, VO = 5 V, RL = 500 Ω 35 10 0 17.8 TURN-OFF TIME DISTRIBUTION Number (pcs) Number (pcs) 30 17.6 40 n = 50 pcs, IF = 10 mA, VO = 5 V, RL = 500 Ω 35 17.4 On-state Resistance Ron2 (Ω) TURN-ON TIME DISTRIBUTION 40 17.2 0 Turn-on Time ton (ms) 0.03 0.04 0.05 0.06 0.07 0.08 Turn-off Time toff (ms) Remark The graphs indicate nominal characteristics. Data Sheet PN10459EJ04V0DS 7 PS7241E-1A TAPING SPECIFICATIONS (in millimeters) 1.55±0.1 2.9 MAX. 12.0±0.2 5.5±0.05 1.5+0.1 –0 7.4±0.1 2.0±0.05 4.0±0.1 1.75±0.1 Outline and Dimensions (Tape) 2.4±0.1 4.6±0.1 0.3 8.0±0.1 Tape Direction PS7241E-1A-E3 PS7241E-1A-E4 Outline and Dimensions (Reel) 2.0±0.5 φ 60 +1 –0 R 1.0 φ 180+0 –1.5 2.0±0.5 φ13.0±0.2 φ 21.0±0.8 13.5±1.0 17.5±1.0 Packing: 900 pcs/reel 8 Data Sheet PN10459EJ04V0DS 11.9 to 15.4 Outer edge of flange PS7241E-1A 1.55±0.1 2.9 MAX. 12.0±0.2 5.5±0.05 1.5+0.1 –0 7.4±0.1 2.0±0.05 4.0±0.1 1.75±0.1 Outline and Dimensions (Tape) 2.4±0.1 4.6±0.1 0.3 8.0±0.1 Tape Direction PS7241E-1A-F4 PS7241E-1A-F3 Outline and Dimensions (Reel) φ 21.0±0.8 φ 100±1.0 R 1.0 φ 13.0±0.2 2.0±0.5 φ13.0±0.2 φ 330±2.0 2.0±0.5 13.5±1.0 17.5±1.0 Packing: 3 500 pcs/reel Data Sheet PN10459EJ04V0DS 11.9 to 15.4 Outer edge of flange 9 PS7241E-1A RECOMMENDED SOLDERING CONDITIONS (1) Infrared reflow soldering • Peak reflow temperature 260°C or below (package surface temperature) • Time of peak reflow temperature 10 seconds or less • Time of temperature higher than 220°C 60 seconds or less • Time to preheat temperature from 120 to 180°C 120±30 s • Number of reflows Three • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Package Surface Temperature T (°C) Recommended Temperature Profile of Infrared Reflow (heating) to 10 s 260°C MAX. 220°C to 60 s 180°C 120°C 120±30 s (preheating) Time (s) (2) Wave soldering • Temperature 260°C or below (molten solder temperature) • Time 10 seconds or less • Preheating conditions 120°C or below (package surface temperature) • Number of times One • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Soldering by soldering iron • Peak temperature (lead part temperature) 350°C or below • Time (each pins) 3 seconds or less • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead. (b) Please be sure that the temperature of the package would not be heated over 100°C. (4) Cautions • Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 10 Data Sheet PN10459EJ04V0DS PS7241E-1A USAGE CAUTIONS 1. Protect against static electricity when handling. 2. Avoid storage at a high temperature and high humidity. Data Sheet PN10459EJ04V0DS 11 PS7241E-1A • The information in this document is current as of January, 2010. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets, etc., for the most up-to-date specifications of NEC Electronics products. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. • No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may appear in this document. • NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC Electronics products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others. • Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. • While NEC Electronics endeavors to enhance the quality and safety of NEC Electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. In addition, NEC Electronics products are not taken measures to prevent radioactive rays in the product design. When customers use NEC Electronics products with their products, customers shall, on their own responsibility, incorporate sufficient safety measures such as redundancy, fire-containment and anti-failure features to their products in order to avoid risks of the damages to property (including public or social property) or injury (including death) to persons, as the result of defects of NEC Electronics products. • NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to NEC Electronics products developed based on a customerdesignated "quality assurance program" for a specific application. The recommended applications of an NEC Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of each NEC Electronics product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to determine NEC Electronics' willingness to support a given application. (Note) (1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its majority-owned subsidiaries. (2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as defined above). M8E0904E 12 Data Sheet PN10459EJ04V0DS PS7241E-1A Caution GaAs Products This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. • Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal. • Do not burn, destroy, cut, crush, or chemically dissolve the product. • Do not lick the product or in any way allow it to enter the mouth.