8.0 kW Combined Pulse Amplifier for Test and Measurement Applications 1 .0 to 2 .0 GHz Versatile Modular assembly allows for either lowerpowered multiple test applications or a single amplifier phase combined system of two VZL-3530J1 amplifiers achieving 8000 watts peak-pulsed output power. The VZL-3530P2 1.0 to 2.0 GHz 8000 Watt TWT Compact Pulsed Amplifier Wide band, automatic fault recycle, user-friendly microprocessor-controlled logic with integrated computer interface, digital metering, and quiet operation suitable for laboratory environments. An integral solid state preamplifier and IEEE interface are included as standard features. Global Applications 230 VAC operation. Designed to meet International Safety Standard EN61010 and Electromagnetic Compatibility 2004/108/EC. Easy to Maintain Modular design and built-in fault diagnostic capability backed by CPI’s worldwide 24-hour customer support network that includes twenty regional factory service centers. tel: +1 (905) 877-0161 fax: +1 (905) 877-5327 e-mail: [email protected] www.cpii.com/satcom 7.0 kW Compact Pulsed Amplifier Communications & Power Industries Canada, Inc. 45 River Drive Georgetown, Ontario CANADA L7G2J4 1.0 t o 2. 0 GH z SPECIFICATIONS, VZL-3530P2 Environmental Electrical OPTIONS: • Remote Control Panel • Input Isolator (-1 dB Gain) Frequency 1.0 to 2.0 GHz Ambient Temperature Output Peak Power (min.) TWT Flange -10° to +40°C operating -40° to +70°C non-operating 9000 W combined 8000 W combined typ, 7500 W min. Relative Humidity 95% non-condensing Altitude 10,000 ft. with standard adiabatic derating of 2°C/1000 ft., operating; 40,000 ft., non-operating As normally encountered in a protected laboratory environment Gain 65 dB min. at rated power; 70 dB typical Gain Adjustment Range 20 dB min. Shock and Vibration Gain Stability ±0.25 dB/24hr max. (after 30 minute warmup and at constant drive and temp.) Mechanical Input VSWR 2.5:1 typ; 1.5:1 typ. with optional input isolator Output VSWR 2.5:1 typ. Load VSWR Cooling (TWT) Forced air with integral blower Rear air intake & exhaust; 0.10" water max. external pressure loss allowable 1.5:1 max. for full spec. compliance; Any value for continuous operation (soft fail VSWR protection limits at 500 W peak) RF Input Connection Type N female RF Output Connection S/C coaxial Phase Noise 0.5°rms asynchronous ripple Dimensions (W x H x D)* Pulse Width 0.07 to 50 µs 19 x 37 x 27.5 in. (483 x 940 x 699 mm) PRF 50 kHz max, 100 kHz max. available as option System Weight 300 lbs (136 kg) Duty Cycle 4% max. Heat Dissipation 2200 watts max. Delay 400 ns typ. Safety EN61010 Droop 0.5 dB over 50 µs Acoustic Noise 65 dBA @ 3 ft. from amplifier NPO -10 dBm/MHz Beam On; -110 dBm/MHz Beam Off *Dimension exclude front handles, rear fans and exhaust ducts. Primary Power 220 - 240 VAC ±10%, single phase 47- 63 Hz Power Consumption 2.2 kVA typ. 2.5 kVA max. Filament Voltage Reduction of 10% in standby for extended TWT life (available as option) Inrush Current 200% max. This product is subject to the U.S. International Traffic in Arms Regulations (ITAR). Sale of this product is subject to US Government approval. In accordance with part 126.1 of the ITAR, it is the policy of the United States to deny licenses and other approvals for the sales, exports/ imports, and or transfer of items subject to the ITAR destined for or originating in certain countries in which the U.S. maintains an arms embargo. Certificate Number: 30515 For more detailed information, please refer to the corresponding CPI Technical Description. Note: Specifications may change without notice as a result of additional data or product refinement. Please contact CPI before using this information for system design. MKT 344, ISSUE 5 DEC 13 PDF