Product Specification Series: RCU AccliMate™ IP68 Sealed Rectangular USB Cable Assembly System RCU Series – USB A Type RCU Series – USB B Type RPBU Series – USB A Type RPBU Series – USB B Type RPCU Series – USB A Type RPCU Series – USB B Type Other configurations available for: USB A, USB B, sealed, unsealed, panel mount version, dust caps See www.samtec.com for more information. Revision: A Date: July 23, 2014 Page 1 © Samtec, Inc. Product Specification Series: RCU AccliMate™ IP68 Sealed Rectangular USB Cable Assembly System 1.0 SCOPE This specification covers performance, testing and quality requirements for Samtec RCU Series AccliMate™ IP68 Sealed Rectangular USB Cable Assembly System. 2.0 DETAILED INFORMATION 2.1 Product prints, catalog pages, test reports and other specific, detailed information can be found at http://www.samtec.com/?RCU, http://www.samtec.com/?RPBU and http://www.samtec.com/?RPCU. 3.0 TESTING 3.1 3.2 3.3 3.4 3.5 Current Rating: 4.5 A (One Pin Powered) Voltage Rating: 300 VAC Ingress Protection: IP68 Operating Temperature Range: -20°C to +80°C Electrical: ITEM TEST CONDITION REQUIREMENT STATUS Withstanding Voltage EIA-364-20 (No Flashover, Sparkover, or Breakdown) 900 VAC Pass Insulation Resistance EIA-364-21 (5000 MΩ minimum) 5,000 MΩ Pass Contact Resistance (LLCR) EIA-364-23 Δ 15 mΩ maximum (Samtec defined)/ No damage Pass REQUIREMENT STATUS 3.6 Mechanical: ITEM TEST CONDITION Durability EIA-364-09C 100 cycles Pass Random Vibration EIA-364-28 Condition V, Letter B 7.56 G 'RMS', 50 to 2000 Hz, 2 hours per axis, 3 axis total , PSD 0.04 Visual Inspection: No Damage LLCR: Δ 15 mΩ maximum Pass Mechanical Shock EIA-364-27 100 G, 6 milliseconds, sawtooth wave, 11.3 fps, 3 shocks/direction, 3 axis (18 total shocks) Normal Force EIA-364-04 Revision: A Visual Inspection: No Damage LLCR: Δ 15 mΩ maximum 30 grams minimum for Gold interface Date: July 23, 2014 Page 2 Pass Pass © Samtec, Inc. Product Specification Series: RCU AccliMate™ IP68 Sealed Rectangular USB Cable Assembly System 3.7 Environmental: ITEM TEST CONDITION REQUIREMENT STATUS Thermal Shock EIA-364-32 Thermal Cycles: 100 (30 minute dwell) Hot Temp: +85°C Cold Temp: -55°C Hot/Cold Transition: Immediate Visual Inspection: No Damage LLCR: Δ 15 mΩ DWV: 900 VAC IR: >5,000 MΩ Pass Thermal Aging (Temp Life) EIA-364-17 Test Condition 4 @ 105°C Condition B for 250 hours Visual Inspection: No Damage LLCR: Δ 15 mΩ DWV: 900 VAC IR: >5,000 MΩ Pass Cyclic Humidity EIA-364-31 Test Temp: +25°C to +65°C Relative Humidity: 90 to 95% Test Duration: 240 hours Visual Inspection: No Damage LLCR: Δ 15 mΩ DWV: 900 VAC IR: >5,000 MΩ Pass Gas Tight EIA-364-36 Gas Exposure: Nitric Acid Vapor Duration: 60 min. Drying Temp.: 50°C +/- 3°C Measurements: Within 1 hour of Exposure LLCR: Δ 15 mΩ Pass IP68 Dust/Water Testing per CEI/IEC 60529 Visual: No dust or water present 30 mins @ 10 Meters Pass 4.0 MATED SYSTEM Mated view information can be found at link below: http://www.samtec.com/documents/webfiles/cpdf/RCU%20Mated%20Document.pdf Revision: A Date: July 23, 2014 Page 3 © Samtec, Inc. Product Specification Series: RCU AccliMate™ IP68 Sealed Rectangular USB Cable Assembly System 5.0 POLARIZING FEATURES 6.0 ADDITIONAL RESOURCES 6.1 For additional mechanical testing or product information, contact our Customer Engineering Support Group at [email protected] 6.2 For RoHS, REACH or other environmental compliance information, contact our Product Environmental Compliance Group at [email protected] Revision: A Date: July 23, 2014 Page 4 © Samtec, Inc.