Product Specification Series: SCPE AccliMate™ IP68 Sealed Circular Ethernet Cable System SCPE Series SCRES Series SCRE Series Other items available for: Cat 5e rating, Dust Caps (DCA-17-01 & DCA-17-02), Panel Plug (SCPPA-17-01) See www.samtec.com for more information. Revision: A Date: August 1, 2014 Page 1 © Samtec, Inc. Product Specification Series: SCPE AccliMate™ IP68 Sealed Circular Ethernet Cable System 1.0 SCOPE This specification covers performance, testing and quality requirements for Samtec SCPE AccliMate™ IP68 Sealed Circular Ethernet Cable System. 2.0 DETAILED INFORMATION 2.1 Product prints, panel, catalog pages, test reports and other specific, detailed information can be found at http://www.samtec.com/?SCPE, http://www.samtec.com/?SCRES and http://www.samtec.com/?SCRE. 3.0 TESTING 3.1 3.2 3.3 3.4 3.5 Current Rating: 1 A (8 Pins Powered) Voltage Rating: 350 VAC Ingress Protection: IP68 Operating Temperature Range: -40°C to +70°C Electrical: ITEM TEST CONDITION REQUIREMENT STATUS Withstanding Voltage EIA-364-20 (No Flashover, Sparkover, or Breakdown) 1050 VAC Pass Insulation Resistance EIA-364-21 (5000 MΩ minimum) 1,000 MΩ Pass Contact Resistance (LLCR) EIA-364-23 Δ 15 mΩ maximum (Samtec defined)/ No damage Pass REQUIREMENT STATUS 3.6 Mechanical: ITEM TEST CONDITION Durability EIA-364-09C 1000 cycles Pass Random Vibration EIA-364-28 Condition V, Letter B 7.56 G 'RMS', 50 to 2000 Hz, 2 hours per axis, 3 axis total , PSD 0.04 Visual Inspection: No Damage LLCR: Δ 15 mΩ maximum Pass Mechanical Shock EIA-364-27 100 G, 6 milliseconds, sawtooth wave, 11.3 fps, 3 shocks/direction, 3 axis (18 total shocks) Visual Inspection: No Damage LLCR: Δ 15 mΩ maximum Pass Normal Force EIA-364-04 30 grams minimum for Gold interface Pass Revision: A Date: August 1, 2014 Page 2 © Samtec, Inc. Product Specification Series: SCPE AccliMate™ IP68 Sealed Circular Ethernet Cable System 3.7 Environmental: ITEM TEST CONDITION REQUIREMENT STATUS Thermal Shock EIA-364-32 Thermal Cycles: 100 (30 minute dwell) Hot Temp: +85°C Cold Temp: -55°C Hot/Cold Transition: Immediate Visual Inspection: No Damage LLCR: Δ 15 mΩ DWV: 1050 VAC IR: >1,000 MΩ Pass Thermal Aging (Temp Life) EIA-364-17 Test Condition 4 @ 105°C Condition B for 250 hours Visual Inspection: No Damage LLCR: Δ 15 mΩ DWV: 1050 VAC IR: >1,000 MΩ Pass Cyclic Humidity EIA-364-31 Test Temp: +25°C to +65°C Relative Humidity: 90 to 95% Test Duration: 240 hours Visual Inspection: No Damage LLCR: Δ 15 mΩ DWV: 1050 VAC IR: >1,000 MΩ Pass Gas Tight EIA-364-36 Gas Exposure: Nitric Acid Vapor Duration: 60 min. Drying Temp.: 50°C +/- 3°C Measurements: Within 1 hour of Exposure LLCR: Δ 15 mΩ Pass IP68 Dust/Water Testing per CEI/IEC 60529 Visual: No dust or water present 30 mins @ 10 Meters Pass 4.0 MATED SYSTEM Mated view information can be found at link below: http://www.samtec.com/documents/webfiles/cpdf/SCPE%20Mated%20Document.pdf Revision: A Date: August 1, 2014 Page 3 © Samtec, Inc. Product Specification Series: SCPE AccliMate™ IP68 Sealed Circular Ethernet Cable System 5.0 KEYING FEATURES Revision: A Date: August 1, 2014 Page 4 © Samtec, Inc. Product Specification Series: SCPE AccliMate™ IP68 Sealed Circular Ethernet Cable System 6.0 PRINTS AND ASSEMBLY INSTRUCTIONS 6.1 Field termination kits 6.1.1 SCPFE Ethernet Field Termination Kit can be found at link below http://www.samtec.com/documents/webfiles/cpdf/SCPFE-XX-X-XX-MKT.pdf 7.0 ADDITIONAL RESOURCES 7.1 For additional product information, contact our Customer Engineering Support Group at [email protected] 7.2 For RoHS, REACH or other environmental compliance information, contact our Product Environmental Compliance Group at [email protected] Revision: A Date: August 1, 2014 Page 5 © Samtec, Inc.