Filename: tfs 1575aa.doc Version 1.0 Vectron International 17.05.2011 Filter specification TFS 1575AA 1/5 Measurement condition Ambient temperature: Input power level: Terminating impedance: Input: Output: 23 0 °C dBm 50 50 Ω Ω Characteristics Remark: The maximum attenuation in the pass band is defined as the insertion loss ae. The nominal frequency fN is fixed at 1575,42 MHz without any tolerance or limit. The frequency shift of the filter in the operating temperature range is included in the production tolerance scheme. Data typ. value Insertion loss (reference level) ae 1,5 Nominal frequency fN - PB - Passband 0,7 Pass band ripple max. 2,5 1575,42 fN dB max. ± dB MHz 1,2 MHz 1,0 dB aabs Absolute attenuation 0,3 dB tolerance / limit MHz … 1520 MHz 42 dB min. 35 dB 1520 MHz … 1535 MHz 39 dB min. 30 dB 1625 MHz … 1630 MHz 55 dB min. 30 dB 1630 MHz … 2400 MHz 45 dB min. 40 dB 2400 MHz … 3000 MHz 45 dB min. 30 dB 3000 MHz … 6000 MHz 22 dB min. 10 dB 1,5 : 1 VSWR within PB Operating temperature range OTR Storage temperature range Temperature coefficient of frequency TCf * max. 2:1 - - 40 °C ... + 85 °C - - 45 °C ... + 85 °C -36 ppm/K - *) ∆f(Hz) = TCf(ppm/K) x (T-T0) x fTo(MHz). Generated: Checked / Approved: Vectron International GmbH & Co. KG Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH & Co. KG reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 1575aa.doc Version 1.0 Vectron International 17.05.2011 Filter specification TFS 1575AA 2/5 Filter characteristic 0 0 -8 -10 -16 -20 -24 magnitude in dB magnitude in dB -30 -40 -50 -60 -32 -40 -48 -56 -70 -64 -80 -72 -90 -100 -80 1376 1000 2000 3000 4000 frequency in MHz 5000 6000 1415.8 1455.6 1495.4 1535.2 1575 1614.8 1654.6 1694.4 1734.2 frequency in MHz 1774 Construction and pin connection (All dimensions in mm) 2,5 +/-0,1 3 4 2 +/-0,1 G75AA ● V30 1 2 3 4 Input Ground Output Ground Date code: V W X ... Year + week 2007 2008 2009 2 0,8 +/-0,1 1 Date code 1,8 ±0,15 35 0, 0,75 ±0,1 1 1,5 ±0,1 2,3 ±0,15 50 Ω Test circuit L1 1 3 L2 SAW 2, 4 Vectron International GmbH & Co. KG Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH & Co. KG reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 1575aa.doc Version 1.0 Vectron International 17.05.2011 Filter specification TFS 1575AA 3/5 Stability characteristics, reliability After the following tests the filter shall meet the whole specification: 1. Shock: 500g, 1 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 - 27 2. Vibration: 10 Hz to 500 Hz, 0,35 mm or 5 g respectively, 1 octave per min, 10 cycles per plan, 3 plans; DIN IEC 68 T2 - 6 3. Change of temperature: 4. Resistance to solder heat (reflow): -55 °C to 125°C / 30 min. each / 10 cycles DIN IEC 68 part 2 – 14 Test N reflow possible: three times max.; for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4; This filter is RoHS compliant (2002/95/EG, 2005/618/EG) Packing Tape & Reel: IEC 286 – 3, with exeption of value for N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters peer reel: reel of empty components at start: reel of empty components at start including leader: trailer: 9000 min. 300 mm min. 500 mm min. 300 mm Pull Off Direction Tape (all dimensions in mm) W : 8,00 +0,3/-0,1 Po : 4,00 ± 0,1 Do : 1,55 ± 0,05 E : F : 3,50 ± 0,05 G(min) : 0,75 P2 : 2,00 ± 0,1 P1 : 4,00 ± 0,1 D1(min) : 1,00 Ao : 2,25 ± 0,1 Bo : 2,80 ± 0,1 Ct : 5,5 ± 0,1 P1 t Po P2 W G Ct Bo F G E Do PIN Marker Ko Date Code Typ D1 Ao W 2 Reel (all dimensions in mm) A : 330 W1 : 8,4 +1,5/-0 W2(max) : 14,4 N(min) : 50 C : 13,0 +0,5/-0,2 A C N W 1 The minimum bending radius is 45 mm. Vectron International GmbH & Co. KG Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH & Co. KG reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 1575aa.doc Version 1.0 Vectron International 17.05.2011 Filter specification TFS 1575AA 4/5 Air reflow temperature conditions Conditions Average ramp-up rate (30°C to 217°C) > 100°C > 150°C > 217°C Peak temperature Time within 5°C of actual peak temperature Cool-down rate (Peak to 50°C) Time from 30°C to Peak temperature Exposure less than 3°C/second between 300 and 600 seconds between 240 and 500 seconds between 30 and 150 seconds max. 260°C between 10 and 30 seconds less than 6°C/second no greater than 300 seconds Chip-mount air reflow profile Temperature / °C max. 260°C 217°C max. 300 s 10 ... 30 s Time / s 30 ... 150 s Vectron International GmbH & Co. KG Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH & Co. KG reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 1575aa.doc Vectron International Version 1.0 Filter specification 17.05.2011 TFS 1575AA 5/5 History Version Reason of Changes Name Date 1.0 - Generation of filter specification Noack 17.05.2011 Vectron International GmbH & Co. KG Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH & Co. KG reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.