Filename: tfs 1200a.doc Version 1.2 Vectron International 25.04.2013 Filter specification TFS 1200A 1/5 Measurement condition Ambient temperature: Input power level: Terminating impedance: Input: Output: 23 0 °C dBm 50 Ω 50 Ω Characteristics Remark: The nominal frequency fN is fixed at 1200.1 MHz. The insertion loss ae is defined as loss value determined at fN. Reference level for the relative attenuation arel of the TFS 1200A is the insertion loss ae. All specified data are met within the operating temperature range. Data typ. value Insertion loss Nominal frequency Bandwidth 3 ae fN 2.3 dB tolerance / limit max. - 5 1200.1 dB MHz BW dB 42.35 Relative attenuation MHz - MHz arel @ 200.02 MHz 70 min. 50 dB @ 400.03 MHz 80 min. 50 dB @ 600.05 MHz 64 min. 47 dB @ 800.07 MHz min. 42 dB Operating temperature range 54 OTR Storage temperature range Temperature coefficient of frequency TCf * - -40 °C ... +90 °C - -45 °C ... +95 °C -73 ppm/K - *) ∆f(Hz) = TCf(ppm/K) x (T-T0) x fTo(MHz). Material: LiNbO3_64° black, so in principle pyrofree. Generated: Checked / Approved: Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 1200a.doc Version 1.2 Vectron International 25.04.2013 Filter specification TFS 1200A 2/5 Filter characteristic 0 -8 -1 -16 -2 -24 -3 -32 -4 magnitude in dB magnitude in dB insertion loss: -2.06 dB 0 -40 -48 -5 -6 -56 -7 -64 -8 -72 -9 -80 50 200 350 500 650 800 950 frequency in MHz 1100 1250 1400 -10 1160 1550 1168 1176 1184 1192 1200 1208 frequency in MHz 1216 1224 1232 1240 Construction and pin connection (All dimensions in mm) 6 7 5 C00A ● D17 8 2 Date code: D E F ... Year + week 2013 2014 2015 Date code 0,6 +/-0,15 7 3 ,0 +/-0,15 3 0,6 +/-0,15 1 ° 60 Ground Input Ground Ground Ground Output Ground Ground 3 1 ,0 +/-0,15 1 4 1 2 3 4 5 6 7 8 5 0,6 +/-0,15 3 ,0 +/-0,15 50 Ω Test circuit L1 2 6 L2 SAW 1, 3, 4, 5,7,8 Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 1200a.doc Version 1.2 Vectron International 25.04.2013 Filter specification TFS 1200A 3/5 Stability characteristics, reliability After the following tests the filter shall meet the whole specification: 1. Shock: 500g, 1 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 - 27 2. Vibration: 10 Hz to 500 Hz, 0,35 mm or 5 g respectively, 1 octave per min, 10 cycles per plan, 3 plans; DIN IEC 68 T2 - 6 3. Change of temperature: 4. Resistance to solder heat (reflow): -55 °C to 125°C / 30 min. each / 10 cycles DIN IEC 68 part 2 – 14 Test N reflow possible: three times max.; for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4; This filter is RoHS compliant (2002/95/EG, 2005/618/EG) Packing Tape & Reel: IEC 286 – 3, with exception of value for N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: reel of empty components at start: reel of empty components at start including leader: trailer: 3000 min. 300 mm min. 500 mm min. 300 mm Pull Off Direction Tape (all dimensions in mm) W : 8,00 ± 0,3 Po : 4,00 ± 0,1 Do : 1,50 +0,1/-0 E : 1,75 ± 0,1 F : 3,50 ± 0,05 G(min) : 0,75 P2 : 2,00 ± 0,05 P1 : 4,00 ± 0,1 D1(min) : 1,50 Ao : 3,25 ± 0,1 Bo : 3,25 ± 0,1 Ct : 5,3 ± 0,1 P1 t Po P2 W G Ct Bo F G E Do PIN Marker Ko Date Code Typ D1 Ao W 2 Reel (all dimensions in mm) A : 180 W1 : 8,4 +1,5/-0 W2(max) : 14,4 N(min) : 60 C : 13,0 ± 0,2 C A N W 1 The minimum bending radius is 45 mm. Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 1200a.doc Version 1.2 Vectron International 25.04.2013 Filter specification TFS 1200A 4/5 Air reflow temperature conditions Conditions Average ramp-up rate (30°C to 217°C) > 100°C > 150°C > 217°C Peak temperature Time within 5°C of actual peak temperature Cool-down rate (Peak to 50°C) Time from 30°C to Peak temperature Exposure less than 3°C/second between 300 and 600 seconds between 240 and 500 seconds between 30 and 150 seconds max. 260°C between 10 and 30 seconds less than 6°C/second no greater than 300 seconds Chip-mount air reflow profile Temperature / °C max. 260°C 217°C max. 300 s 10 ... 30 s Time / s 30 ... 150 s Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 1200a.doc Vectron International Version 1.2 Filter specification 25.04.2013 TFS 1200A 5/5 History Version Reason of Changes Name Date 1.0 Generation of development specification. Schönbein 30.05.12 2.0 Generation of filter specification. Schönbein 19.09.12 2.1 Remark on pyrofree material added to data table Schönbein 25.04.2013 Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.