Filename: tfs 1621.doc Version 2.1 Vectron International 11.01.2010 Filter specification TFS 1621 1/5 Measurement condition Ambient temperature: Input power level: Terminating impedance: Input: Output: 23 0 °C dBm 50 50 Ω Ω Characteristics Remark: The maximum attenuation in the pass band is defined as the insertion loss ae. The nominal frequency fN is fixed at 1621,25 MHz without any tolerance or limit. The values of absolute attenuation aabs are guaranteed for the whole operating temperature range. The frequency shift of the filter in the operating temperature range is included in the production tolerance scheme. Data typ. value Insertion loss ae 2,0 Nominal frequency fN - PB - Passband … … … … … … … 1475 1570 1575 1662 1670 2200 3000 max. fN ± 2,5 dB 1621,25 MHz 5,25 MHz arel Absolute attenuation 200 MHz 1475 MHz 1570 MHz 1652 MHz 1662 MHz 1670 MHz 2200 MHz Return loss dB tolerance / limit MHz MHz MHz MHz MHz MHz MHz 43 32 27 19 55 39 29 14 Input power level Operating temperature range OTR Storage temperature range Temperature coefficient of frequency TCf *** min. min. min. min. min. min. min. min. 35 30 20 9 30 35 25 10 dB dB dB dB dB dB dB dB - max. 10 dBm - - 40 °C ... + 85 °C - - 45 °C ... + 90 °C -42 dB dB dB dB dB dB dB dB ppm/K - **) ∆fc(Hz) = Tcf(ppm/K) x (T - To) x fCAT (MHz). Generated: Checked / Approved: Vectron International GmbH & Co. KG Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH & Co. KG reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 1621.doc Version 2.1 Vectron International 11.01.2010 Filter specification TFS 1621 2/5 0 -1 4.5 -20 -2 4 -30 -3 3.5 -4 3 -5 2.5 -6 2 -70 -7 1.5 -80 -8 1 -90 -9 0.5 -40 -50 -60 -100 500 1000 1500 2000 frequency in MHz 2500 -10 1580 3000 1590 1600 1610 1620 1630 frequency in MHz 1640 1650 VSWR 5 0 -10 magnitude in dB magnitude in dB Filter characteristic 0 1660 Construction and pin connection (All dimensions in mm) 5 6 4 1,2 Max. H21 ● A03 2 1 1 2 3 4 5 6 Ground Input Ground Ground Output Ground Date code: A B C ... Year + week 2010 2011 2012 3 Date code 3 0,75 3,0 +/-0,15 0,30X0,30 1 0,6 6 4 0,6 50 Ohm Test circuit L1 2 5 L2 SAW 1, 3, 4, 6 Vectron International GmbH & Co. KG Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH & Co. KG reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 1621.doc Version 2.1 Vectron International 11.01.2010 Filter specification TFS 1621 3/5 Stability characteristics, reliability After the following tests the filter shall meet the whole specification: 1. Shock: 500g, 1 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 - 27 2. Vibration: 10 Hz to 500 Hz, 0,35 mm or 5 g respectively, 1 octave per min, 10 cycles per plan, 3 plans; DIN IEC 68 T2 - 6 3. Change of temperature: 4. Resistance to solder heat (reflow): -55 °C to 125°C / 30 min. each / 10 cycles DIN IEC 68 part 2 – 14 Test N reflow possible: three times max.; for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4; This filter is RoHS compliant (2002/95/EG, 2005/618/EG) Packing Tape & Reel: IEC 286 – 3, with exception of value for N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: reel of empty components at start: reel of empty components at start including leader: trailer: 9000 min. 300 mm min. 500 mm min. 300 mm Pull Off Direction P1 Tape (all dimensions in mm) W : 8,00 ± 0,3 Po : 4,00 ± 0,1 Do : 1,50 +0,1/-0 E : 1,75 ± 0,1 F : 3,50 ± 0,05 G(min) : 0,75 P2 : 2,00 ± 0,05 P1 : 4,00 ± 0,1 D1(min) : 1,50 Ao : 3,25 ± 0,1 Bo : 3,25 ± 0,1 Ct : 5,5 ± 0,1 Date Code Do P2 W G Ct Bo F G E t Po Ko Typ PIN Marker D1 Ao W 2 Reel (all dimensions in mm) A : 330 W1 : 8,4 +1,5/-0 W2(max) : 14,4 N(min) : 50 C : 13,0 +0,5/-0,2 C A N W 1 The minimum bending radius is 45 mm. Vectron International GmbH & Co. KG Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH & Co. KG reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 1621.doc Version 2.1 Vectron International 11.01.2010 Filter specification TFS 1621 4/5 Air reflow temperature conditions Conditions Average ramp-up rate (30°C to 217°C) > 100°C > 150°C > 217°C Peak temperature Time within 5°C of actual peak temperature Cool-down rate (Peak to 50°C) Time from 30°C to Peak temperature Exposure less than 3°C/second between 300 and 600 seconds between 240 and 500 seconds between 30 and 150 seconds max. 260°C between 10 and 30 seconds less than 6°C/second no greater than 300 seconds Chip-mount air reflow profile Temperature / °C max. 260°C 217°C max. 300 s 10 ... 30 s Time / s 30 ... 150 s Vectron International GmbH & Co. KG Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH & Co. KG reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 1621.doc Vectron International Version 2.1 Filter specification 11.01.2010 TFS 1621 5/5 History Version Reason of Changes Name Date 1.0 - Generation of development specification Noack 01.04.2009 2.0 - Change data table Noack 23.11.2009 2.1 - Generation of filter specification - Add typical values and filter characteristic Noack 11.01.2010 Vectron International GmbH & Co. KG Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH & Co. KG reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.