Filename: tfs 1040.doc Version 2.0 Vectron International 29.05.2012 Filter specification TFS 1040 1/5 Measurement condition Ambient temperature: Input power level: Terminating impedance: Input: Output: 23 0 °C dBm 50 Ω 50 Ω Characteristics Remark: The nominal frequency fN is fixed at 1040 MHz. The insertion loss ae is defined as loss value determined at fN. All specified data are met within the operating temperature range. Data typ. value Insertion loss (reference level) ae 2,3 Nominal frequency fN - Centre frequency fC B B Bandwidth 3 B B Absolute attenuation 130 260 390 520 650 780 910 max. 5,0 1040 MHz - 38,90 MHz - 80 70 61 56 51 48 46 dB dB dB dB dB dB dB dB MHz BW dB @ @ @ @ @ @ @ 1040 dB tolerance / limit aabs MHz MHz MHz MHz MHz MHz MHz Operating temperature range OTR Storage temperature range Temperature coefficient of frequency - 46 50 50 50 40 40 40 40 dB dB dB dB dB dB dB - 40 °C ... + 90 °C TCf * min. min. min. min. min. min. min. - 45 °C ... + 95 °C ppm/K - *) ∆f(Hz) = TCf(ppm/K) x (T-T 0 ) x fTo(MHz). B B Generated: Checked / Approved: Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 1040.doc Version 2.0 Vectron International 29.05.2012 Filter specification TFS 1040 2/5 0 0 -10 -1 -20 -2 -30 -3 magnitude in dB magnitude in dB Filter characteristic -40 -50 -60 -4 -5 -6 -70 -7 -80 -8 -90 -9 -100 -10 200 400 600 800 1000 1200 frequency in MHz 1400 1600 1800 2000 1020 1025 1030 1035 1040 1045 frequency in MHz 1050 1055 1060 Construction and pin connection (All dimensions in mm) 6 7 A40 ● C22 8 2 1 1,2 Max. 5 4 3 Date code d. Gr 3,0 +/-0,15 0,6 60 7 0,6 Ground Input Ground Ground Ground Output Ground Ground Date code: C D E ... Year + week 2012 2013 2014 3 1,5 1 1 2 3 4 5 6 7 8 5 0,6 50 Ω Test circuit L1 2 6 L2 SAW 1, 3, 4, 5, 7, 8 Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 1040.doc Version 2.0 Vectron International 29.05.2012 Filter specification TFS 1040 3/5 Stability characteristics, reliability After the following tests the filter shall meet the whole specification: 1. Shock: 500g, 1 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 - 27 2. Vibration: 10 Hz to 500 Hz, 0,35 mm or g respectively, 1 octave per min, 10 cycles per plane, 3 planes; DIN IEC 68 T2 - 6 3. Change of temperature: 4. Resistance to solder heat (reflow): 5. ESD -55 °C to 125°C / 30 min. each / 10 cycles DIN IEC 68 part 2 – 14 Test N reflow possible: three times max.; for temperature conditions, see page 4: "Air reflow temperature conditions" ANSI/ESD S20.20-1999, class 1A for HBM This filter is RoHS compliant (2002/95/EG, 2005/618/EG) Packing Tape & Reel: IEC 286 – 3, with exception of value for N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: reel of empty components at start: reel of empty components at start including leader: trailer: 9000 min. 300 mm min. 500 mm min. 300 mm Pull Off Direction Tape (all dimensions in mm) W : 8,00 ± 0,3 Po : 4,00 ± 0,1 Do : 1,50 +0,1/-0 E : 1,75 ± 0,1 F : 3,50 ± 0,05 G(min) : 0,75 P2 : 2,00 ± 0,05 P1 : 4,00 ± 0,1 D1(min) : 1,50 Ao : 3,25 ± 0,1 Bo : 3,25 ± 0,1 Ct : 5,5 ± 0,1 P1 t Po P2 W G Ct Bo F G E Do PIN Marker Ko Date Code Typ D1 Ao W 2 Reel (all dimensions in mm) A : 330 W1 : 8,4 +1,5/-0 W2(max) : 14,4 N(min) : 50 C : 13,0 +0,5/-0,2 C A N W 1 The minimum bending radius is 45 mm. Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 1040.doc Version 2.0 Vectron International 29.05.2012 Filter specification TFS 1040 4/5 Air reflow temperature conditions Conditions Average ramp-up rate (30°C to 217°C) > 100°C > 150°C > 217°C Peak temperature Time within 5°C of actual peak temperature Cool-down rate (Peak to 50°C) Time from 30°C to Peak temperature Exposure less than 3°C/second between 300 and 600 seconds between 240 and 500 seconds between 30 and 150 seconds max. 260°C between 10 and 30 seconds less than 6°C/second no greater than 300 seconds Chip-mount air reflow profile Temperature / °C max. 260°C 217°C max. 300 s 10 ... 30 s Time / s 30 ... 150 s Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 1040.doc Vectron International Version 2.0 Filter specification 29.05.2012 TFS 1040 5/5 History Version Reason of Changes Name Date 1.0 - Generation of development specification S. Channaa 01.12.2009 1.1 - Add typical values and filter characteristic - Change stability, generation of filter specification S. Channaa 11.03.2010 - Changed pull off direction from reel Schönbein 29.05.2012 2.0 Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.