Filename: tfs 733.doc Version 3.2 Vectron International 06.03.2014 Filter specification TFS 733 1/5 Measurement condition Ambient temperature: Input power level: Terminating impedance: Input: Output: 23 0 °C dBm 50 Ω 50 Ω Characteristics Remark: The maximum attenuation in the pass band is defined as the insertion loss ae. The nominal frequency fN is fixed at 733MHz without any tolerance or limit. The values of absolute attenuation aabs are guaranteed for the whole operating temperature range. The frequency shift of the filter in the operating temperature range is included in the production tolerance scheme. Data typ. value ae fN Insertion loss Nominal frequency PB Passband … … max. 3.0 ± dB 733.0 MHz 5.0 MHz 0.8 dB aabs Absolute attenuation MHz MHz max. fN 0.4 dB Pass band variation 10 200 1. 5 dB tolerance / limit 200 550 MHz MHz 38 34 dB dB min. min. 20 15 dB dB MHz MHz MHz MHz MHz MHz 38 37 42 39 23 15 13 dB dB dB dB dB dB ns min. min. min. min. min. min. max. 5 20 33 15 10 10 50 dB dB dB dB dB dB ns Absolute group delay at fN 35 ns max. 100 ns Return loss within PB 16 dB min. 14 dB max. 16 dBm 816 MHz … 905 905 MHz … 1073 1073 MHz … 1085 1085 MHz … 1480 1480 MHz … 2690 2690 MHz … 4900 Group delay ripple within PB p-p Input power level Operating temperature range OTR Storage temperature range Temperature coefficient of frequency TCf * - - 40 °C ... + 85°C - - 40 °C ... + 85°C -42 ppm/K *) ∆fc(Hz) = Tcf(ppm/K) x (T - To) x fCAT (MHz) Generated: Checked / Approved: Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 733.doc Version 3.2 Vectron International 06.03.2014 Filter specification TFS 733 2/5 Filter characteristic Construction and pin connection (All dimensions in mm) 6 7 733 ● E10 8 1 1,0 Max. 5 4 1 2 3 4 5 6 7 8 Ground Input Ground Floating Ground Output Ground Floating Date code: E F G ... Year + week 2014 2015 2016 3 2 Date code 0,6 d. Gr 60 7 0,6 3,0 +/-0,15 3 1,5 1 5 0,6 50 Ω Test circuit L1 2 6 L2 SAW 1, 3, 5, 7 Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 733.doc Version 3.2 Vectron International 06.03.2014 Filter specification TFS 733 3/5 Stability characteristics, reliability After the following tests the filter shall meet the whole specification: 1. Shock: 500g, 1 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 - 27 2. Vibration: 10 Hz to 500 Hz, 0.35 mm or g respectively, 1 octave per min, 10 cycles per plane, 3 planes; DIN IEC 68 T2 - 6 3. Change of temperature: -55 °C to 125°C / 15 min. each / 100 cycles DIN IEC 68 part 2 – 14 Test N 4. Resistance to solder heat (reflow): reflow possible: three times max.; for temperature conditions, see page 4: "Air reflow temperature conditions" This filter is RoHS compliant (2011/65/EU) Packing Tape & Reel: IEC 286 – 3, with exception of value for N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: reel of empty components at start: reel of empty components at start including leader: trailer: 3000 min. 300 mm min. 500 mm min. 300 mm Pull Off Direction P1 t Do Po P2 E Tape (all dimensions in mm) PIN Marker G W Bo F G : 12.00 ± 0.3 : 4.00 ± 0.1 : 1.55 +0.1/-0 : 1.75 ± 0.1 : 5.50 ± 0.05 : 0.75 : 2.00 ± 0.05 : 4.00 ± 0.1 : 1.50 : 3.25 ± 0.1 : 3.25 ± 0.1 : 9.2 ± 0.1 Ct W Po Do E F G(min) P2 P1 D1(min) Ao Bo Ct Ko Date Code Typ D1 Ao W 2 Reel (all dimensions in mm) A W1 W2(max) N(min) C : 180.0 : 12.4 : 18.4 : 60.0 : 13.0 +1.5/-0 C A N ± 0.2 W 1 The minimum bending radius is 45 mm. Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 733.doc Version 3.2 Vectron International 06.03.2014 Filter specification TFS 733 4/5 Air reflow temperature conditions Conditions Average ramp-up rate (30°C to 217°C) > 100°C > 150°C > 217°C Peak temperature Time within 5°C of actual peak temperature Cool-down rate (Peak to 50°C) Time from 30°C to Peak temperature Exposure less than 3°C/second between 300 and 600 seconds between 240 and 500 seconds between 30 and 150 seconds max. 260°C between 10 and 30 seconds less than 6°C/second no greater than 300 seconds Chip-mount air reflow profile Temperature / °C max. 260°C 217°C max. 300 s 10 ... 30 s Time / s 30 ... 150 s Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 733.doc Vectron International Version 3.2 Filter specification 06.03.2014 TFS 733 5/5 History Version Reason of Changes Name Date 1.0 Generation of development specification. S.Springfeldt 21.09.2012 2.0 Change of package (6pad to 8pad with floating pins) Change of data table @4900MHz S.Springfeldt 04.01.2013 2.1 Generation of filter specification S.Springfeldt 07.01.2013 2.2 Updating plots and typical values S.Springfeldt 04.07.2013 3.0 Change of tape and reel width from 8mm to 12mm S.Springfeldt 23.10.2013 3.1 maximum input power updated Kortenbeutel 07.01.2014 3.2 Adding tape and reel dimensions S.Springfeldt 06.03.2014 Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.