Filename: tfs 400l.doc Version 2.0 Vectron International 11.05.2012 Filter specification TFS 400L 1/5 Measurement condition Ambient temperature: Input power level: Terminating impedance: Input: Output: 23 0 °C dBm 200 Ω 200 Ω Characteristics Remark: The attenuation at nominal frequency is defined as the insertion loss ae. The nominal frequency fN is fixed at 400,0 MHz without any tolerance. The values of the absolute attenuation aabs are guaranteed for the whole operating temperature range. The frequency shift of the filter in the operating temperature range is included in the production tolerance scheme. Data typ. value Insertion loss (reference level) ae Nominal frequency Centre frequency Bandwidth 3 2,4 fN - fC 400,0 dB tolerance / limit max. 3,5 400,0 dB MHz MHz BW dB 9,13 Absolute attenuation MHz - aabs fN ± 100 MHz 56 dB min. 50 dB fN ± 200 MHz 57 dB min. 50 dB fN ± 300 MHz 59 dB min. 50 dB max. 10 dBm Input power level Operating temperature range OTR Storage temperature range Temperature coefficient of frequency TCf * - - 40 °C ... + 85 °C - - 40 °C ... + 85 °C -32 ppm/K *) ∆f(Hz) = TCf(ppm/K) x (T-T0) x fTo(MHz). Generated: Checked / Approved: Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 400l.doc Version 2.0 Vectron International 11.05.2012 Filter specification TFS 400L 2/5 Filter characteristic 0 0 -10 -0.5 -20 -1 -30 -1.5 magnitude in dB magnitude in dB -40 -50 -60 -2 -2.5 -3 -70 -3.5 -80 -4 -90 -4.5 -100 100 200 300 400 frequency in MHz 500 600 -5 700 395 396 397 398 399 400 401 frequency in MHz 402 403 404 405 Construction and pin connection (All dimensions in mm) 7 6 400L ● B28 8 1 1,2 Max. 5 2 4 3 1 2 3 4 5 6 7 8 Ground Input Ground Ground Ground Output Ground Ground Date code: B C D ... Year + week 2011 2012 2013 Date cod e 0,6 . Grd 60 7 0,6 3,0 +/-0,15 3 1,5 1 5 0,6 200 Ω Test circuit L1 2 6 L2 SAW 1, 3, 4, 5, 7, 8 Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 400l.doc Version 2.0 Vectron International 11.05.2012 Filter specification TFS 400L 3/5 Stability characteristics, reliability After the following tests the filter shall meet the whole specification: 1. Shock: 500g, 1 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 - 27 2. Vibration: 10 Hz to 500 Hz, 0,35 mm or 5 g respectively, 1 octave per min, 10 cycles per plan, 3 plans; DIN IEC 68 T2 - 6 3. Change of temperature: 4. Resistance to solder heat (reflow): -55 °C to 125°C / 30 min. each / 10 cycles DIN IEC 68 part 2 – 14 Test N reflow possible: twice max.; for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4; This filter is RoHS compliant (2002/95/EG, 2005/618/EG) Packing Tape & Reel: IEC 286 – 3, with exception of value for N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: reel of empty components at start: reel of empty components at start including leader: trailer: 3000 min. 300 mm min. 500 mm min. 300 mm Pull Off Direction Tape (all dimensions in mm) W : 8,00 ± 0,3 Po : 4,00 ± 0,1 Do : 1,50 +0,1/-0 E : 1,75 ± 0,1 F : 3,50 ± 0,05 G(min) : 0,75 P2 : 2,00 ± 0,05 P1 : 4,00 ± 0,1 D1(min) : 1,50 Ao : 3,25 ± 0,1 Bo : 3,25 ± 0,1 Ct : 5,3 ± 0,1 P1 t Po P2 W G Ct Bo F G E Do PIN Marker Ko Date Code Typ D1 Ao W 2 Reel (all dimensions in mm) A : 180 W1 : 8,4 +1,5/-0 W2(max) : 14,4 N(min) : 60 C : 13,0 ± 0,2 C A N W 1 The minimum bending radius is 45 mm. Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 400l.doc Version 2.0 Vectron International 11.05.2012 Filter specification TFS 400L 4/5 Air reflow temperature conditions Conditions Average ramp-up rate (30°C to 217°C) > 100°C > 150°C > 217°C Peak temperature Time within 5°C of actual peak temperature Cool-down rate (Peak to 50°C) Time from 30°C to Peak temperature Exposure less than 3°C/second between 300 and 600 seconds between 240 and 500 seconds between 30 and 150 seconds max. 260°C between 10 and 30 seconds less than 6°C/second no greater than 300 seconds Chip-mount air reflow profile Temperature / °C max. 260°C 217°C max. 300 s 10 ... 30 s Time / s 30 ... 150 s Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 400l.doc Vectron International Version 2.0 Filter specification 11.05.2012 TFS 400L 5/5 History Version Reason of Changes Name Date 1.0 - Generation of development specification Channaa 24.11.2005 1.1 - Add typical values, add filter characteristic - Change attenuation, add test circuit - Generation of filter specification Channaa 02.02.2006 1.2 - Change typical insertion loss Channaa 08.02.2006 1.3 - typo in remark section corrected - re-formatted Channaa 20.07.2011 2.0 - Change pull off direction from reel Schönbein 11.05.2012 Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.