Filename: tfs 1227a.doc Version 2.0 Vectron International 15.06.2009 Filter specification TFS 1227A 1/5 Measurement condition Ambient temperature: Input power level: Terminating impedance: Input: Output: 23 0 °C dBm 50 Ω || 0 pF 50 Ω || 0 pF Characteristics Remark: The minimum attenuation in the pass band is defined as the insertion loss ae. The nominal frequency fN is fixed at 1227,0 MHz without any tolerance or limit. The values of absolute attenuation aabs are guaranteed for the whole operating temperature range. The frequency shift of the filter in the operating temperature range is included in the production tolerance scheme. Data typ. value Insertion loss (reference level) ae 1,0 Nominal frequency fN - PB - Passband Pass band ripple Pass band variation Absolute attenuation 0,3 1172 1257 1282 MHz MHz MHz MHz … … … … 1172 1197 1282 2000 dB tolerance / limit max. fN 3,0 ± dB 1227,0 MHz 15,0 MHz 0,4 dB max. 2,0 dB 1,2 dB max. 3,0 dB 42 18 18 49 dB dB dB dB min. min. min. min. 40 10 10 40 dB dB dB dB 70 ns max. 100 ns 75 ° max. 100 ° 10 dB min. 6 - max. 20 * - - 54 °C ... + 85 °C aabs MHz MHz MHz MHz Group delay ripple within PB p-p Phase ripple within PB p-p Return loss Input power level Operating temperature range OTR Storage temperature range Temperature coefficient of frequency TCf ** -41 dB dBm - 54 °C ... + 85 °C ppm/K - *) This power level is only allowed for short term operation (cycle time 1:1000), the max. input power for continuous operation is max.10dBm only **) ∆f(Hz) = TCf(ppm/K) x (T-T0) x fTo(MHz), fTo: frequency at room temperature Generated: Checked / Approved: Vectron International GmbH & Co. KG Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH & Co. KG reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 1227a.doc Version 2.0 Vectron International 15.06.2009 Filter specification TFS 1227A 2/5 0 0 0.398 -6 -1 0.356 -2 0.314 -3 0.272 -4 0.23 -5 0.188 -6 0.146 -7 0.104 -8 0.062 -9 0.02 Filter characteristic -12 -18 -30 -36 delay in µs magnitude in dB magnitude in dB -24 -42 -48 -54 -60 27 267 507 747 987 1227 1467 frequency in MHz 1707 1947 2187 2427 -10 1207 1211 1215 1219 1223 1227 1231 frequency in MHz 1235 1239 1243 -0.022 1247 Construction and pin connection (All dimensions in mm) 5 6 4 1,2 Max. C27A ● X25 2 1 Ground Input Ground Ground Output Ground Date code: X A B ... Year + week 2009 2010 2011 3 Date code 3 0,75 0,30X0,30 1 3,0 +/-0,15 1 2 3 4 5 6 0,6 6 4 0,6 50 Ω Test circuit L1 2 5 L2 SAW 1, 3, 4, 6 Vectron International GmbH & Co. KG Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH & Co. KG reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 1227a.doc Version 2.0 Vectron International 15.06.2009 Filter specification TFS 1227A 3/5 Stability characteristics, reliability After the following tests the filter shall meet the whole specification: 1. Shock: 500g, 1 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 - 27 2. Vibration: 10 Hz to 500 Hz, 0,35 mm or g respectively, 1 octave per min, 10 cycles per plan, 3 plans; DIN IEC 68 T2 - 6 3. Change of temperature: 4. Resistance to solder heat (reflow): 5. ESD -55 °C to 125°C / 30 min. each / 10 cycles DIN IEC 68 part 2 – 14 Test N reflow possible: three times max.; for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4; ANSI/ESD S20.20-1999, class 1A for HBM This filter is RoHS compliant (2002/95/EG, 2005/618/EG) Packing Tape & Reel: IEC 286 – 3, with exception of value for N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: reel of empty components at start: reel of empty components at start including leader: trailer: 9000 min. 300 mm min. 500 mm min. 300 mm Pull Off Direction Tape (all dimensions in mm) W : 8,00 ± 0,3 Po : 4,00 ± 0,1 Do : 1,50 +0,1/-0 E : 1,75 ± 0,1 F : 3,50 ± 0,05 G(min) : 0,75 P2 : 2,00 ± 0,05 P1 : 4,00 ± 0,1 D1(min) : 1,50 Ao : 3,25 ± 0,1 Bo : 3,25 ± 0,1 Ct : 5,5 ± 0,1 P1 Date Code Do P2 W G Ct Bo F G E t Po Ko Typ PIN Marker D1 Ao W 2 Reel (all dimensions in mm) A : 330 W1 : 8,4 +1,5/-0 W2(max) : 14,4 N(min) : 50 C : 13,0 +0,5/-0,2 A C N W 1 The minimum bending radius is 45 mm. Vectron International GmbH & Co. KG Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH & Co. KG reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 1227a.doc Version 2.0 Vectron International 15.06.2009 Filter specification TFS 1227A 4/5 Air reflow temperature conditions Conditions Average ramp-up rate (30°C to 217°C) > 100°C > 150°C > 217°C Peak temperature Time within 5°C of actual peak temperature Cool-down rate (Peak to 50°C) Time from 30°C to Peak temperature Exposure less than 3°C/second between 300 and 600 seconds between 240 and 500 seconds between 30 and 150 seconds max. 260°C between 10 and 30 seconds less than 6°C/second no greater than 300 seconds Chip-mount air reflow profile Temperature / °C max. 260°C 217°C max. 300 s 10 ... 30 s Time / s 30 ... 150 s Vectron International GmbH & Co. KG Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH & Co. KG reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 1227a.doc Vectron International Version 2.0 Filter specification 15.06.2009 TFS 1227A 5/5 History Version Reason of changes Name Date 1.0 - Generation of development specification Strehl 07.02.2008 1.1 - typing error of absolute attenuation corrected, matching configuration added Pfeiffer 18.07.2008 1.2 - add of typical values and filter characteristics Pfeiffer 05.12.2008 2.0 - fT0 defined - group delay ripple and phase ripple added Pfeiffer 15.06.2009 Vectron International GmbH & Co. KG Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH & Co. KG reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.