Filename: tfs 644.doc Version 2.2 Vectron International 16.01.2014 Filter specification TFS 644 1/5 Measurement condition Ambient temperature: Input power level: Terminating impedance: Input: Output: 23 0 °C dBm 150 Ω || 0 pF 150 Ω || 0 pF Characteristics Remark: The nominal frequency fN is fixed at 644.5313 MHz. The insertion loss ae is defined as loss value determined at fN. Reference level for the relative attenuation arel of the TFS 644 is the insertion loss ae. All specified data are met within the operating temperature range. Data typ. value Insertion loss (reference level) ae 2.3 Nominal frequency fN - Centre frequency fC Bandwidth fN + + + + + + + + + 4.5 dB 644.5313 MHz 644.5313 MHz - 23.2 MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz Input power level Operating temperature range OTR Storage temperature range Temperature coefficient of frequency MHz - aabs 4.5313 MHz 80 160 161.13 240 320 322.27 400 480 483.40 560 80 160 161.13 240 320 322.27 400 480 483.40 max. BW 3 dB Absolute attenuation fN fN fN fN fN fN fN fN fN fN fN fN fN fN fN fN fN fN fN dB tolerance / limit 3.2 dB max. 61.5 69 68.6 69 70 69 70 70 69 59 59 73 78 71 68 66 66 66 66 dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB min. min. min. min. min. min. min. min. min. min. min. min. min. min. min. min. min. min. min. 52 60 60 60 60 60 60 60 60 55 52 60 60 60 55 55 55 55 55 - max. 0 - -40 °C ... +85 °C TCf * -73 5.5 dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dBm -55 °C ... +25 °C ppm/K - *) ∆f(Hz) = TCf(ppm/K) x (T-T0) x fCAT(MHz). Material: LiNbO3_64° black, so in principle pyrofree. Generated: Checked / Approved: Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 644.doc Version 2.2 Vectron International 16.01.2014 Filter specification TFS 644 2/5 0 0 -10 -1 -20 -2 -30 -3 -40 -4 magnitude in dB magnitude in dB Filter characteristic -50 -60 -5 -6 -70 -7 -80 -8 -90 -9 -100 -10 200 400 600 frequency in MHz 800 1000 1200 635 640 645 frequency in MHz 650 655 Construction and pin connection (All dimensions in mm) 7 6 644 ● E03 8 1 1,2 Max. 5 2 4 1 2 3 4 5 6 7 8 Ground Input Ground Ground Ground Output Ground Ground Date code: E F G ... Year + week 2014 2015 2016 3 Date cod e 0,6 . Grd 60 7 0,6 3,0 +/-0,15 3 1,5 1 5 0,6 150 Ω Test circuit L1 2 6 L2 SAW 1, 3, 4, 5, 7, 8 Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 644.doc Version 2.2 Vectron International 16.01.2014 Filter specification TFS 644 3/5 Stability characteristics, reliability After the following tests the filter shall meet the whole specification: 1. Shock: 500g, 1 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 - 27 2. Vibration: 10 Hz to 500 Hz, 0.35 mm or g respectively, 1 octave per min, 10 cycles per plane, 3 planes; DIN IEC 68 T2 - 6 3. Change of temperature: 4. Resistance to solder heat (reflow): -55 °C to 125°C / 15 min. each / 100 cycles DIN IEC 68 part 2 – 14 Test N reflow possible: three times max.; for temperature conditions, see page 4: "Air reflow temperature conditions" This filter is RoHS compliant (2011/65/EU) Packing Tape & Reel: IEC 286 – 3, with exception of value for N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: reel of empty components at start: reel of empty components at start including leader: trailer: 3000 min. 300 mm min. 500 mm min. 300 mm Pull Off Direction Tape (all dimensions in mm) W : 8,00 ± 0,3 Po : 4,00 ± 0,1 Do : 1,50 +0,1/-0 E : 1,75 ± 0,1 F : 3,50 ± 0,05 G(min) : 0,75 P2 : 2,00 ± 0,05 P1 : 4,00 ± 0,1 D1(min) : 1,50 Ao : 3,25 ± 0,1 Bo : 3,25 ± 0,1 Ct : 5,3 ± 0,1 P1 t PIN Marker Po P2 W G Ct Bo F G E Do Ko Date Code Typ D1 Ao W 2 Reel (all dimensions in mm) A : 180 W1 : 8,4 +1,5/-0 W2(max) : 14,4 N(min) : 60 C : 13,0 ± 0,2 C A N W 1 The minimum bending radius is 45 mm. Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 644.doc Version 2.2 Vectron International 16.01.2014 Filter specification TFS 644 4/5 Air reflow temperature conditions Conditions Average ramp-up rate (30°C to 217°C) > 100°C > 150°C > 217°C Peak temperature Time within 5°C of actual peak temperature Cool-down rate (Peak to 50°C) Time from 30°C to Peak temperature Exposure less than 3°C/second between 300 and 600 seconds between 240 and 500 seconds between 30 and 150 seconds max. 260°C between 10 and 30 seconds less than 6°C/second no greater than 300 seconds Chip-mount air reflow profile Temperature / °C max. 260°C 217°C max. 300 s 10 ... 30 s Time / s 30 ... 150 s Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 644.doc Vectron International Version 2.2 Filter specification 16.01.2014 TFS 644 5/5 History Version Reason of Changes Name Date 1.0 Generation of development specification Strehl 18.10.2005 1.1 Add typical values, add filter characteristic Generate filter specification from development specification Channaa 30.01.2006 1.2 Increase operating temperature range Add additional frequencies for absolute attenuation Channaa 19.05.2006 1.3 Change characteristics Strehl 24.09.2007 2.0 Change pull off direction from reel Schönbein 11.05.2012 2.1 Remark on pyrofree material added to data table Schönbein 24.04.2013 2.2 Maximum input power updated Kortenbeutel 16.01.2014 Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.