Filename: tfs 1209.doc Version 1.2 Vectron International 17.11.2008 Filter specification TFS 1209 1/5 Measurement condition Ambient temperature: Input power level: Terminating impedance: Input: Output: 23 0 °C dBm 50 50 Ω Ω Characteristics Remark: The maximum attenuation in the pass band is defined as the insertion loss ae. The nominal frequency fN is fixed at 1209,5 MHz without any tolerance or limit. The values of absolute attenuation aabs are guaranteed for the whole operating temperature range. The frequency shift of the filter in the operating temperature range is included in the production tolerance scheme. Data typ. value Insertion loss ae 3,5 Nominal frequency fN - PB - Passband 1,35 Pass band variation dB tolerance / limit max. fN dB max. 5,0 ± dB 1209,5 MHz 43,5 MHz 2,0 dB aabs Absolute attenuation 0,3 1297 MHz MHz … 1000 … 1305 MHz MHz 25 18 dB dB min. min. 23 10 dB dB 1305 MHz … 2000 MHz 28 dB min. 25 dB Group delay variation within PB 6 ns max. 10 ns Return loss within PB 8,5 dB min. 7 dB Input power level - max. 10 - - 40 °C ... + 85°C Operating temperature range OTR - Storage temperature range Temperature coefficient of frequency TCf * -74 dBm - 45 °C ... + 85°C ppm/K - *) ∆f(Hz) = TCf(ppm/K) x (T-T0) x fTo(MHz) Generated: Checked / Approved: Vectron International GmbH & Co. KG Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH & Co. KG reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 1209.doc Version 1.2 Vectron International 17.11.2008 Filter specification TFS 1209 2/5 0 -1.4 -20 -2.8 -30 -4.2 -40 -5.6 -50 -60 -7 -9.8 -80 -11.2 -90 -12.6 200 400 600 800 1000 frequency in MHz 1200 1400 1600 1800 -14 1140 2000 6 -8.4 -70 -100 9 VSWR 0 -10 magnitude in dB m a g n itu d e in d B Filter characteristic 3 1154 1168 1182 1196 1210 1224 frequency in MHz 1238 1252 1266 0 1280 Construction and pin connection (All dimensions in mm) 5 6 4 C09 ● W47 1,2 Max. Ground Input Ground Ground Output Ground Date code: W X A ... Year + week 2008 2009 2010 3 2 1 1 2 3 4 5 6 Date code 0,1 3 0,75 3 ±0,15 1,5 1 6 0,6 0,6 4 50 Ω Test circuit L1 2 5 L2 SAW 1, 3, 4, 6 Vectron International GmbH & Co. KG Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH & Co. KG reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 1209.doc Version 1.2 Vectron International 17.11.2008 Filter specification TFS 1209 3/5 Stability characteristics, reliability After the following tests the filter shall meet the whole specification: 1. Shock: 500g, 1 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 - 27 2. Vibration: 10 Hz to 500 Hz, 0,35 mm or 5 g respectively, 1 octave per min, 10 cycles per plan, 3 plans; DIN IEC 68 T2 - 6 3. Change of temperature: 4. Resistance to solder heat (reflow): -55 °C to 125°C / 30 min. each / 10 cycles DIN IEC 68 part 2 – 14 Test N reflow possible: three times max.; for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4; This filter is RoHS compliant (2002/95/EG, 2005/618/EG) Packing Tape & Reel: IEC 286 – 3, with exception of value for N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: reel of empty components at start: reel of empty components at start including leader: trailer: 9000 min. 300 mm min. 500 mm min. 300 mm Pull Off Direction Tape (all dimensions in mm) W : 8,00 ± 0,3 Po : 4,00 ± 0,1 Do : 1,50 +0,1/-0 E : 1,75 ± 0,1 F : 3,50 ± 0,05 G(min) : 0,75 P2 : 2,00 ± 0,05 P1 : 4,00 ± 0,1 D1(min) : 1,50 Ao : 3,25 ± 0,1 Bo : 3,25 ± 0,1 Ct : 5,5 ± 0,1 P1 Date Code Do P2 W G Ct Bo F G E t Po Ko Typ PIN Marker D1 Ao W 2 Reel (all dimensions in mm) A : 330 W1 : 8,4 +1,5/-0 W2(max) : 14,4 N(min) : 50 C : 13,0 +0,5/-0,2 A C N W 1 The minimum bending radius is 45 mm. Vectron International GmbH & Co. KG Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH & Co. KG reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 1209.doc Version 1.2 Vectron International 17.11.2008 Filter specification TFS 1209 4/5 Air reflow temperature conditions Conditions Average ramp-up rate (30°C to 217°C) > 100°C > 150°C > 217°C Peak temperature Time within 5°C of actual peak temperature Cool-down rate (Peak to 50°C) Time from 30°C to Peak temperature Exposure less than 3°C/second between 300 and 600 seconds between 240 and 500 seconds between 30 and 150 seconds max. 260°C between 10 and 30 seconds less than 6°C/second no greater than 300 seconds Chip-mount air reflow profile Temperature / °C max. 260°C 217°C max. 300 s 10 ... 30 s Time / s 30 ... 150 s Vectron International GmbH & Co. KG Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH & Co. KG reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 1209.doc Vectron International Version 1.2 Filter specification 17.11.2008 TFS 1209 5/5 History Version Reason of Changes Name Date 1.0 - Generation of development specification Strehl 03.01.2008 1.1 - Change of tolerance scheme and return loss; generation of filter specification S.Springfeldt 26.02.2008 1.2 - updating the filter specification S.Springfeldt 17.11.2008 Vectron International GmbH & Co. KG Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH & Co. KG reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.