Filename: tfs 614.doc Version 2.2 Vectron International 16.01.2014 Filter specification TFS 614 1/5 Measurement condition Ambient temperature: Input power level: Terminating impedance: Input: Output: 23 0 150 150 °C dBm Ω Ω Characteristics Remark: The nominal frequency fN is fixed at 614.0 MHz. The insertion loss ae is defined as loss value determined at fN. Reference level for the relative attenuation arel of the TFS 614 is the insertion loss ae. All specified data are met within the operating temperature range. Data typ. value Insertion Loss (reference level) ae 2.2 Nominal Frequency fN - Centre Frequency fC 614.4 Bandwidth 3 dB tolerance / limit max. 4.5 614.4 MHz - 21.68 MHz - dB MHz BW dB Relative Attenuation arel @ @ @ @ @ 102.4 204.8 307.2 409.6 512.0 MHz MHz MHz MHz MHz 65 70 69 68 65 dB dB dB dB dB min. min. min. min. min. 50 50 50 50 50 dB dB dB dB dB @ @ @ 716.8 819.2 921.6 MHz MHz MHz 64 65 60 dB dB dB min. min. min. 50 50 50 dB dB dB max. 0 Input power level Operating Temperature Range OTR Storage Temperature Range Temperature Coefficient of Frequency TCf * - -40 °C ... +90 °C - -45 °C ... +95 °C -77 ppm/K dBm - *) ∆f(Hz) = TCf(ppm/K) x (T-T0) x fCAT(MHz). Material: LiNbO3_64° black, so in principle pyrofree. Generated: Checked / Approved: Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 614.doc Version 2.2 Vectron International 16.01.2014 Filter specification TFS 614 2/5 Filter characteristic 0 -10 -0.5 -20 -1 -30 -1.5 magnitude in dB magnitude in dB insertion loss: -2.24 dB 0 -40 -50 -60 -2 -2.5 -3 -70 -3.5 -80 -4 -90 -4.5 -100 200 300 400 500 600 700 frequency in MHz 800 900 1000 -5 1100 605 610 615 frequency in MHz 620 625 Construction and pin connection (All dimensions in mm) 6 7 5 614 ● E03 8 2 1 4 Ground Input Ground Ground Ground Output Ground Ground Date code: E F G ... Year + week 2014 2015 2016 3 1 ,0 +/-0,15 Date code 0,6 +/-0,15 7 3 ,0 +/-0,15 3 0,6 +/-0,15 1 ° 60 1 2 3 4 5 6 7 8 5 0,6 +/-0,15 3 ,0 +/-0,15 150 Ω Test circuit L1 2 6 L2 SAW 1, 3, 4, 5, 7, 8 Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 614.doc Version 2.2 Vectron International 16.01.2014 Filter specification TFS 614 3/5 Stability characteristics, reliability After the following tests the filter shall meet the whole specification: 1. Shock: 500g, 1 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 - 27 2. Vibration: 10 Hz to 500 Hz, 0.35 mm or g respectively, 1 octave per min, 10 cycles per plane, 3 planes; DIN IEC 68 T2 - 6 3. Change of temperature: 4. Resistance to solder heat (reflow): 5. ESD -55 °C to 125°C / 15 min. each / 100 cycles DIN IEC 68 part 2 – 14 Test N reflow possible: three times max.; for temperature conditions, see page 4: "Air reflow temperature conditions" ANSI/ESD S20.20-1999, class 1A for HBM This filter is RoHS compliant (2011/65/EU) Packing Tape & Reel: IEC 286 – 3, with exception of value for N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: reel of empty components at start: reel of empty components at start including leader: trailer: 9000 min. 300 mm min. 500 mm min. 300 mm Pull Off Direction Tape (all dimensions in mm) W : 8,00 ± 0,3 Po : 4,00 ± 0,1 Do : 1,50 +0,1/-0 E : 1,75 ± 0,1 F : 3,50 ± 0,05 G(min) : 0,75 P2 : 2,00 ± 0,05 P1 : 4,00 ± 0,1 D1(min) : 1,50 Ao : 3,25 ± 0,1 Bo : 3,25 ± 0,1 Ct : 5,5 ± 0,1 P1 t PIN Marker Po P2 W G Ct Bo F G E Do Ko Date Code Typ D1 Ao W 2 Reel (all dimensions in mm) A : 330 W1 : 8,4 +1,5/-0 W2(max) : 14,4 N(min) : 50 C : 13,0 +0,5/-0,2 C A N W 1 The minimum bending radius is 45 mm. Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 614.doc Version 2.2 Vectron International 16.01.2014 Filter specification TFS 614 4/5 Air reflow temperature conditions Conditions Average ramp-up rate (30°C to 217°C) > 100°C > 150°C > 217°C Peak temperature Time within 5°C of actual peak temperature Cool-down rate (Peak to 50°C) Time from 30°C to Peak temperature Exposure less than 3°C/second between 300 and 600 seconds between 240 and 500 seconds between 30 and 150 seconds max. 260°C between 10 and 30 seconds less than 6°C/second no greater than 300 seconds Chip-mount air reflow profile Temperature / °C max. 260°C 217°C max. 300 s 10 ... 30 s Time / s 30 ... 150 s Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 614.doc Vectron International Version 2.2 Filter specification 16.01.2014 TFS 614 5/5 History Version Reason of Changes Name Date 1.0 Generation of development specification Strehl 30.10.2008 1.1 Add typical values, add filter characteristic Generation of filter specification S. Channaa 24.02.2009 2.0 Changed pull off direction from reel Schönbein 29.05.2012 2.1 Remark on pyrofree material added to data table Schönbein 25.04.2013 2.2 Maximum input power updated Kortenbeutel 16.01.2014 Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.