CRO1760C-LF PHASE NOISE (1 Hz BW, typical) Rev A1 Voltage-Controlled Oscillator Surface Mount Module Applications • Low Jitter Clocks • Basestations • Test Equipment £(f) (dBc/Hz) 14118 Stowe Drive, Suite B Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 1758 Typ Phase Noise @ 10 kHz offset (1 Hz BW) -120 Harmonic Suppression (2nd) -15 Tuning Voltage 0.5 Max Units 1762 MHz dBc/Hz -12 dBc 4.5 Vdc MHz/V 5 Tuning Sensitivity (avg.) 9 dBm Input Capacitance 50 pF Pushing 1 MHz/V Pulling (12 dB Return Loss, Any Phase) 1 MHz 65 °C Max Units Power Output 3 Load Impedance Operating Temperature Range 50 -15 Package Style Power Supply Requirements 6 MINI-16SM-SP Min Typ Supply Voltage (Vcc, nom.) 5 Supply Current (Icc) 25 Vdc 30 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B Voltage-Controlled Oscillator Surface Mount Module CRO1760C-LF Rev A1 Tuning Curve, typ. 1770 1768 FREQUENCY (MHz) 1766 1764 1762 1760 1758 1756 65 °C 25 °C 1754 1752 1750 1748 -15 °C 1746 1744 1742 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT 10 SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 9 8 7 6 5 0.030 MIN. CUTBACK FROM LIVE PADS 4 3 2 1745 1749 1753 1755 1758 1760 1762 1764 1766 1768 FREQUENCY (MHz) 65 °C 25 °C -15 °C Physical Dimensions SOLDER MASK PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B