Formosa MS HIGH RELIABILITY-TEST CAPABILITIES Item Test Conditions Reference 1. Solder Resistance at 260 5 for 10 2sec. immerse body into solder 1/16" 1/32" MIL-STD-750D METHOD-2031 2. Solder ability at 245 5 MIL-STD-202F METHOD-208 3. Pull test 1Kg in axial lead direction for 10 sec. MIL-STD-750D METHOD-2036 4. Bend Lead 0.5Kg weight applied to each lead bending arc 90 5 for 3 times. MIL-STD-750D METHOD-2036 5. High Temperature Reverse Bias VR=80% rate at TA=100 MIL-STD-750D METHOD-1026 6. Forward Operation Life Rated average rectifier current at T=25 7. Intermittent Operation Life On state: TJ=125 ~175 with rated IRMS power for 5 min. off state: TJ=TA+15 with cool forced air, on and off for 1000 cycles. 8. Pressure Cooker 15PSIG at TA=121 9. Temperature Cycling -55 to +125 dwelled for 30 min. and transferred for 5min. total 10 cycles. MIL-STD-750D METHOD-1051 10. Thermal Shock 0 MIL-STD-750D METHOD-1056 11. Forward Surge 8.3ms single half sine-wave superimposed on rated load, one surge. MIL-STD-750D METHOD-4066-2 12. Humidity at TA=65 MIL-STD-750D METHOD-1038 13. High Temperature Storage Life at 150 14. Solvent Resistance Dip into Freon at 25 for 5 sec. for 1000 hrs. for 500hrs. MIL-STD-750D METHOD-1027 MIL-STD-750D METHOD-1036 for 4 hrs. for 5 min. rise to 100 for 5 min. total 10 cycles. , RH=98% for 1000hrs. MIL-STD-750D METHOD-1031 for 1000 hrs. for 1 min. MIL-STD-202F METHOD-215 200705