SMB Jack Connector Clamp/Solder Attachment For RG178, RG196 TECHNICAL DATA SHEET PE4269 SMB Jack Connector Clamp/Solder Attachment For RG178, RG196 Configuration Connector Connector Interface Type Cable Attachment Method (Shield/Contact) Body Style SMB Jack RG178,RG196 Clamp/Solder Straight Electrical Specifications Frequency Range, GHz Impedance, Ohms Maximum VSWR Maximum Operating Voltage, Volts Dielectric Withstanding Voltage, Vrms DC to 4 50 1.46:1 250 750 Mechanical Specifications Temperature Operating Range, deg C -65 to +165 Size Length, in [mm] Width/Dia., in [mm] 0.65 [16.51] 0.22 [6] Weight, lbs [g] 0.005 [2.27] Connector Type Contact Material and Plating Contact Plating Specification Body Material and Plating Body Plating Specification Dielectric Type SMB Jack Beryllium Copper, Gold MIL-PRF-39013 Brass, Nickel MIL-PRF-39013 Teflon . Compliance Certifications (visit www.Pasternack.com for current document) RoHS Compliant Yes Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: SMB Jack Connector Clamp/Solder Attachment For RG178, RG196 PE4269 PE4269 REV 1 SMB Jack Connector Clamp/Solder Attachment For RG178, RG196 TECHNICAL DATA SHEET PE4269 Plotted and Other Data Notes: Values at 25 °C, sea level SMB Jack Connector Clamp/Solder Attachment For RG178, RG196 from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and fiber optic products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: SMB Jack Connector Clamp/Solder Attachment For RG178, RG196 PE4269 URL: http://www.pasternack.com/smb-jack-standard-rg178-rg196-connector-pe4269-p.aspx PE4269 REV 2 © 2013 Pasternack Enterprises All Rights Reserved PE4269 REV REV. A CAD FILE 090808 SCALE N/A SIZE A 2233 NOTES: 1. UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE NOMINAL. 2. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AT ANY TIME. 3. DIMENSIONS ARE IN INCHES [mm]. 4. FITS MIL-C-17 AND EQUIVALENT CABLES. FSCM NO. 53919 PE4269 DWG TITLE 4. INSTALL SMALL INSULATOR OVER CABLE DIELECTRIC. SOLDER CONTACT TO CENTER CONDUCTOR. INSERT CABLE ASSEMBLY INTO BODY AND TIGHTEN. 3. SLIDE FERRULE ONTO CABLE, OVER DIELECTRIC AND UNDER BRAID. PUSH INTO WASHER UNTIL IT STOPS. IF NECESSARY TRIM EXCESS BRAID FLUSH WITH SURFACE OF COMPRESSION WASHER AND FLANGE OF FERRULE. 2. SLIDE COMPRESSION WASHER OVER THE BRAID UNTIL IT BOTTOMS OUT ON THE CABLE JACKET. FAN OUT BRAID RADIALLY AGAINST THE COMPRESSION WASHER BY ROTATING THE CABLE DIELECTRIC. 1. TRIM CABLE AS SHOWN. TIN CENTER CONDUCTOR. SLIDE NUT ONTO CABLE. ASSEMBLY PROCEDURES SMB Jack Connector Clamp/Solder Attachment For RG178, RG196 PE4269 CAD Drawing 3