SPECIFICATION FOR APPROVAL REF. : RB1314□□□□L□-□□□ ABC'S DWG NO. PROD. Radial Inductor NAME REV. 20130617-B PAGE 1 Ⅰ﹒Configuration and dimensions： F 101 Aψ E Wψ C Aψ B Marking : " " : Start Fig : A ( 3.3μH~47μH ) 101----100 uH ( Inductance code ) "：Start C Fig : B ( 68μH~15mH ) Aψ 11.70 ±0.8 F B Marking：‧101 " 101 Aψ E B C D E F 12.00 ±1.0 15.00 ±3.0 18.00 ±3.0 2.50 max. 9.00 ±1.0 (A) 7.00 ±0.8 (B) Ⅱ﹒Description： a﹒Ferrite drum core construction. b﹒Enamelled copper wire：F class c﹒Product weight： 4.60g（ref.） d﹒Moisture sensitivity Level 1 e﹒Products comply with RoHS' requirements f﹒Halogen free available Ⅲ﹒General specification： a﹒Storage temp.：-40℃ ～ +125℃ b﹒Operaing temp.：-40℃ ～ +125℃ ( Temp. rise included. ) AR-001C Wψ D Aψ Unit：m/m Wψ Per spec. (A) 0.80 (B) SPECIFICATION FOR APPROVAL REF. : RB1314□□□□L□-□□□ ABC'S DWG NO. PROD. Radial Inductor NAME REV. 20130617-B PAGE 2 Ⅳ﹒Electrical characteristics： SRF ( MHz ) typ. 59.00 RDC (Ω) max. 0.008 IDC (A) max. 5.600 7.96M 45.00 0.009 4.700 1K 7.96M 34.00 0.012 3.900 140 1K 2.52M 26.00 0.015 3.200 15.0 ±20% 120 1K 2.52M 19.00 0.019 2.600 RB1314220KL□-□□□ 22.0 ±10% 110 1K 2.52M 14.00 0.026 2.200 RB1314330KL□-□□□ 33.0 ±10% 100 1K 2.52M 10.00 0.045 1.800 RB1314470KL□-□□□ 47.0 ±10% 90 1K 2.52M 8.30 0.056 1.500 RB1314680KL□-□□□ 68.0 ±10% 80 1K 2.52M 6.70 0.092 1.200 RB1314101KL□-□□□ 100.0 ±10% 70 1K 796K 5.40 0.120 1.000 RB1314151KL□-□□□ 150.0 ±10% 70 1K 796K 4.30 0.200 0.820 RB1314221KL□-□□□ 220.0 ±10% 40 1K 796K 3.40 0.250 0.680 RB1314331KL□-□□□ 330.0 ±10% 40 1K 796K 2.70 0.420 0.550 RB1314471KL□-□□□ 470.0 ±10% 30 1K 796K 2.30 0.510 0.460 RB1314681KL□-□□□ 680.0 ±10% 30 1K 796K 1.90 0.790 0.380 RB1314102KL□-□□□ 1000.0 ±10% 40 1K 252K 1.60 1.300 0.310 RB1314152KL□-□□□ 1500.0 ±10% 30 1K 252K 1.30 1.700 0.250 RB1314222KL□-□□□ 2200.0 ±10% 60 1K 252K 1.10 2.900 0.210 RB1314332KL□-□□□ 3300.0 ±10% 50 1K 252K 0.90 3.700 0.170 RB1314472KL□-□□□ 4700.0 ±10% 50 1K 252K 0.76 5.600 0.140 RB1314682KL□-□□□ 6800.0 ±10% 60 1K 252K 0.65 9.400 0.120 RB1314103KL□-□□□ 10000.0 ±10% 80 1K 79.6K 0.53 12.000 0.100 RB1314153KL□-□□□ 15000.0 ±10% 70 1K 79.6K 0.41 15.000 0.082 Inductance ( μH ) Q ref. RB13143R3ML□-□□□ 3.3 ±20% 90 RB13144R7ML□-□□□ 4.7 ±20% 100 1K RB13146R8ML□-□□□ 6.8 ±20% 80 RB1314100ML□-□□□ 10.0 ±20% RB1314150ML□-□□□ DWG No. Test Freq. ( Hz ) L Q 1K 7.96M 1). Electrical specifications at 25℃ 2). IDC base on Temp. rise 20℃ max. 3). Lead： 0.6ψ 〜 0.8ψ m/m soldered copper wire ( 3.3uH 〜 47uH ) Lead： 0.8ψ m/m tinned copper wire ( 68uH 〜 15mH ) AR-001C Wψ m/m 0.8 0.7 0.6 0.8 SPECIFICATION FOR APPROVAL REF. : RB1314□□□□L□-□□□ ABC'S DWG NO. PROD. Radial Inductor NAME REV. 20130617-B PAGE 3 Ⅴ﹒Dwging number expression： R B 1 3 1 4 Reference code Appendix code 2 : Package Appendix code 1 : Classification Tolerance code Electrical code Dimension code Type code Appendix code 1：Product Classification L：Lead Free Standard products comply with RoHS' requirements Appendix code 2：Package Information Code AR-001C Inner package Inner package Q'TY Remark A Box 130 pcs 680K〜153K B Tray 280 pcs 3R3M〜470K( A type ) C Box 150 pcs 3R3M〜470K SPECIFICATION FOR APPROVAL REF. : RB1314□□□□L□-□□□ ABC'S DWG NO. PROD. Radial Inductor NAME REV. 20130617-B PAGE 4 Ⅵ﹒Reliability test： Item 1.High Temperature Exposure Reference documents MIL-STD-202 Method 108 Test Condition 1.Temperature: 125℃ 2.Time:96 hours. 1.Temperature: -40℃ ~ 125℃ 2.Temperature Cycling JESD22 Method JA-104 2.Number of cycle:96 cycle 3.Dwell time:30 minutes 3.Biased Humidity Test MIL-STD-202 Method 103 1.Temperature: 85±5 ℃ 2.Time:96 Hours 3.Humidity: 85±5% RH. 1.Temperature: 125℃ 2.Time:96 hours. 3.Apply rated current. 4.Operational Life MIL-PRF-27 5.Exeternal Visual MIL-STD-883 Method 2009 constructions, marking and Inspect product workmanship. Test Specification 1.No mechanical and electrical damage. 2.Inductance shall not change more than ±10%. 1.No mechanical and electrical damage. 2.Inductance shall not change more than ±10%. 1.No mechanical and electrical damage. 2.Inductance shall not change more than ±10%. 1.No mechanical and electrical damage. 2.Inductance shall not change more than ±10%. 1.No pollution on the surface of products. 2.Clear marking. 3.No crack. 6.Physical Dimensions JESD22 Method JB-100 Verify physical dimensions to the applicable product detail specification. Per product specification standard 7.Resistance to solvents MIL-STD-202 Method 215 Immerse into solvent for 3±0.5 minutes & brush 10 times for therr cycles. 1.No body change in apperarance. 2.No marking blurred. 3.Inductance shall not change more than ±10%. 1.Frequency and Amplitued : 10-2000-10 Hz, 1.5 mm. 2.Direction:X, Y, Z 3.Test duration:2 hours for each direction, 6 hours in total. 1.Method：Dip 2.Temperature：260±5 3.Time（temp.≧ 260℃）：10 second. 4.Number of times：3 times. 1.No mechanical and electrical damage. 2.Inductance shall not change more than ±10%. 8.Vibration Test MIL-STD-202 Method 204 9.Resistance To Soldering Heat Test MIL-STD-202 Method 210 10.Rated current MIL-STD-202 Method 330 11.Temperature rise MIL-PRF-27 12.Over load MIL-PRF-27 13.Solderability Test J-STD-002 Dip pads in flux then dip in solder pot at 240±5 for 5 senconds. Teminals area must have 95% min. Solder coverage. 14.Electrical Characteriazation User Spec. 1.Operating temperature： -40℃~125℃ 2.Room temperature：25℃. 1.No mechanical and electrical damage. 2.Inductance shall not change more than ±10%. 15.Withstanding Voltage Test MIL-STD-202 Method 201 1.DV:500V 2.Time:1minutes 16.Drop JESD22-B111 Packaged & Drop down from 1m.In 1 angle 1ridges & 2 surfaces orientation. 17.Terminal Strength Test JIS-C-6429 1.Apply push force to samples mounted on PCB. 2.Force of 1.8 kg for 60±1 seconds. AR-001C 1.No mechanical and electrical damage. 2.Inductance shall not change more than ±10%. 1.No mechanical and electrical damage. Apply rated current for 5 second. 2.Inductance shall not change more than ±10%. 1.No mechanical and electrical damage. Apply rated current for 10 minutes. 2.Inductance shall not change more than ±10%. 1.No mechanical and electrical damage. Apply twice as rated current for 5 minutes. (It's not application to some special design) 2.Inductance shall not change more than ±10%. 1.During the test no breakdown. 2.The characteristic is normal after test. 1.No case deformation or change in appearance. 2.Inductance shall not change more than ±10%. After test, inductors shall be no mechanical damage.