DTEPU40A SERIES Up to 40 Watts AC/DC Desktop Power Supplies Single Output Rev A Size: 4.21in x 1.85in x 1.19in (107mm x 47mm x 30mm) OPTIONS FEATURES • Output Connector • Output Voltage • Wide Operating Voltage of 90~264VAC • IEC-320-C14 Input Inlet • Optional Output Connectors Available • Single Outputs APPLICATIONS • • • • • • • • • • • • Class I System Energy Efficiency Level VI RoHS Compliant Over Current and Short Circuit Protection High Efficiency of 84~90% 1 Year Warranty DESCRIPTION Ethernet Hub Portable Devices Charger Monitor Set-top Box AV Equipment The DTEPU40A series of AC DC desktop power supplies offers up to 40 watts of output power in a 4.2” x 1.85” x 1.19” package. This series offers single output models with output voltages ranging from 5~48VDC and a wide input voltage range of 90~264VAC. Each model is both Energy Efficiency Level VI and RoHS compliant and has high efficiency of 84~90%. Each model is also protected against both over current and short circuit conditions and has UL/c-UL (UL 60950-1:2nd Edition) and TUV/GS (EN60950-1:2nd Edition) safety approvals. MODEL SELECTION TABLE Model Number(1) DTEPU40A-102 DTEPU40A-103 DTEPU40A-104 DTEPU40A-105 DTEPU40A-106 DTEPU40A-107 DTEPU40A-108 DTEPU40A-109 DTEPU40A-110 DTEPU40A-111 12/18/2015 Input Voltage Range Output Voltage Output Current 90~264VAC 5~5.99VDC 6.5~8VDC 8~11VDC 11~13VDC 13~16VDC 16~21VDC 21~27VDC 27~33VDC 33~40VDC 40~48VDC 5.00A 3.75~4.61A 3.18~4.38A 3.07~3.64A 2.50~3.07A 1.90~2.50A 1.48~1.90A 1.21~1.48A 1.00~1.21A 0.83~1.00A Ripple & Noise(7) 100mVp-p No Load Power Consumption Output Power Total Regulation Efficiency 0.1 Watts 30W 30W 35W 40W 40W 40W 40W 40W 40W 40W ±5% ±5% ±5% ±5% ±5% ±5% ±3% ±3% ±2% ±2% 89~95% Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 1 of 4 DTEPU40A SERIES Up to 40 Watts AC/DC Desktop Power Supplies Single Output Rev A SPECIFICATIONS All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Safety Approvals Input Voltage Range Operate Voltage Range Sine Wave Io=Full Load, Vin=100VAC Io=Full Load, Vin=240VAC Io=Full Load, 25°C, Cool Start, Vin=115VAC Io=Full Load, 25°C, Cool Start, Vin=230VAC 100 90 47 Full Load, Vin=100VAC Vin=230VAC, 10~90% Load Change at Condition 0.5 4 Typ Max Unit INPUT SPECIFICATIONS Input Voltage Range Input Frequency Low Line Input Current High Line Low Line Inrush Current High Line OUTPUT SPECIFICATIONS Output Voltage Line Regulation(5) Load Regulation(6) Output Power Output Current Ripple & Noise (20MHz BW)(7) Hold-Up Time(8) Start-Up Time Temperature Coefficient No Load Power Consumption PROTECTION Over Load Protection Short Circuit Protection ENVIRONMENTAL SPECIFICATIONS Operating Temperature Storage Temperature Operating Humidity Storage Humidity Electro Static Discharge Operating Altitude (Elevation) Vibration Surge Voltage MTBF Cooling Flammability Rating GENERAL SPECIFICATIONS Efficiency(9) Dielectric Withstanding Voltage Isolation Resistance Safety Ground Leakage Current PHYSICAL SPECIFICATIONS Weight 240 264 63 0.9 0.52 50 100 40 80 VAC Hz A A See Table 1 5 % % 3 ±0.04 0.1 mVp-p mS S %/°C W See Table See Table 100 Rated Load and Nominal Line Io=Full Load, Vin=110VAC Io=Full Load, Vin=100VAC All Outputs No Load, Vin=230VAC 8 Recovers automatically after fault condition is removed 110 Derate linearly from 100% load at 40ºC to 50% load at 70ºC 10~95% RH Non-condensing 0 -40 0 0 Air Discharge, IEC61000-4-5 Contact Discharge, IEC61000-4-2 All conditions 10~500Hz, 10min./1cycle, 60min. each along X, Y, Z axes Line-Neutral Line-PE & Neutral-PE Operating Temperature at 25ºC, calculated per MIL-HDBK-217F 150 Automatic Recovery % °C °C %RH %RH 70 85 95 95 8 6 3000 5 1 2 kV M G kV 100,000 hours Free Air Convection UL94V-1 Io=Full Load, Vin=230VAC Primary to Secondary Primary to PE Test Voltage=500VDC Vin=240VAC/60Hz 84 4242 2550 50 90 % VDC MΩ mA 0.75 9.35-9.88oz (265-280g) 4.21in x 1.85in x 1.19in (107mm x 47mm x 30mm) Dimensions (L x W x H) SAFETY & EMC CHARACTERISTICS Safety Approvals(2) EMC Emission Protection Classes 12/18/2015 UL/c-UL (UL 60950-1: 2nd Edition) TUV/GS (EN 60950-1: 2nd Edition) Compliance to EN55022 (CISPR22) Class I Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] B Class Page 2 of 4 Rev A DTEPU40A SERIES Up to 40 Watts AC/DC Desktop Power Supplies Single Output NOTES (1) (2) (3) (4) (5) (6) (7) (8) (9) DTEPU40A-102-104 are required to use AWG#14/4FT output cable. DTEPU40A-105-110 are required to use AWG#18/4FT output cable. DTEPU40A-111 is required to use AWG#20/4FT output cable. The electrical characteristics will be changed by modified output cable. The DTEPU40A-102 is available on NRCan mark Output can provide up to peak load when the power supply starts up. Staying in more than rated load continuously is not allowed. Each output is checked to be within voltage accuracy in 60% rated load condition. Line regulation is defined by changing ±10% of input voltage from nominal line at rated load. Load regulation is defined by changing ±40% of measured output load from 60% rated load. Ripple & Noise is measured by using 20MHz bandwidth limited oscilloscope and terminated each output with a 0.47uF capacitor at rated load and nominal line. Hold up time is measured from end of the last charging pulse to the time which the main output drops down to low limit of main output at rated load and nominal line. Efficiency measured at rated load and nominal line. DERATING CURVES Input Voltage Derating Curve Temperature Derating Curve 12/18/2015 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 3 of 4 Rev A DTEPU40A SERIES Up to 40 Watts AC/DC Desktop Power Supplies Single Output MECHANICAL DRAWINGS Mechanical Specification COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 12/18/2015 (603)778-2300 (888)597-9255 (603)778-9797 [email protected] www.wallindustries.com 37 Industrial Drive Exeter, NH 03833 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 4 of 4