DTSPU41A SERIES 30-40 Watt Single Output AC/DC Desktop Power Supply Rev A FEATURES • Wide Operating Voltage: 90 to 264VAC, 47-63Hz • IEC-320-C14 Input Inlet • Single Output • Class I • Cooling by Free Air Convection Size: 4.21in x 1.85in x 1.18in • Optional Output Connectors Available • Cooling by Free Air Convection • UL/cUL (UL 60950-1:2nd Edition), TUV/GS (EN60950-1:2nd Edition) Safety Approvals • Energy Star 2.0, Efficiency Level VI • Short Circuit and Over Load Protection APPLICATIONS DESCRIPTION • • • • • • • The DTSPU41A series of single output AC DC desktop power supplies provides up to 40 watts of continuous output power. This series includes IEC-320-C14 input for worldwide applications. All supplies are UL 94V-1 min compliant and all models meet FCC Part 15- class B and CISPR-22 class B emission. Limits are designed to comply with UL/c-UL (UL 60950-1:2nd) edition, TUV/GS (EN 60950-1:2nd Edition) and new CE requirements. All units are 100% burn-in tested. POS System AV Equipment Portable Devices Monitor Charger LED Lighting Ethernet Hub MODEL SELECTION TABLE Model Number Input Voltage Range DTSPU41A-102 DTSPU41A-103 DTSPU41A-104 DTSPU41A-105 DTSPU41A-106 DTSPU41A-107 DTSPU41A-108 DTSPU41A-109 DTSPU41A-110 DTSPU41A-111 100~240Vac Output Voltage Output Current 5~5.99 VDC 6.5~8 VDC 8~11 VDC 11~13 VDC 13~16 VDC 16~21 VDC 21~27 VDC 27~33 VDC 33~40 VDC 40~48 VDC 5.00A 3.75~4.61A 3.18~4.38A 3.07~3.64A 2.50~3.07A 1.90~2.50A 1.48~1.90A 1.21~1.48A 1.00~1.21A 0.83~1.00A Ripple & Noise(1) 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p Total Regulation 5% 5% 5% 5% 5% 5% 3% 3% 2% 2% Output Power 30W 30W 35W 40W 40W 40W 40W 40W 40W 40W No-Load Power Efficiency(2) Consumption (max.) 0.3W 83~90% 0.3W 83~90% 0.3W 83~90% 0.3W 83~90% 0.3W 83~90% 0.3W 83~90% 0.3W 83~90% 0.3W 83~90% 0.3W 83~90% 0.3W 83~90% SPECIFICATIONS All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS INPUT SPECIFICATIONS Safety Approval Input Voltage Range Input Operate Voltage Range Input Frequency Input Inrush Current OUTPUT SPECIFICATIONS Output Voltage Line Regulation(5) Load Regulation(6) Output Power Output Current Ripple & Noise (Peak to Peak) Transient Response Time Start-Up Time Hold-Up Time(7) Temperature Coefficient PROTECTION Short Circuit Protection Over Load Protection 12/3/2015 Typ 100 90 47 Low Line High Line Low Line High Line Input Current Min Io=Full Load, Vin=100VAC Io=Full Load, Vin=240VAC Full Load, 25ºC, Cool Start, Vin=100VAC Full Load, 25ºC, Cool Start, Vin=240VAC Max Unit 240 264 63 0.93 0.93 45 90 VAC VAC VAC A A See Table Io=Full Load, Vin=100~120VAC Vin=230VAC, 10~90% Load Change at Condition 0.5 4 % % 4 2 10 ±0.04 mS S mS %/°C See Table See Table See Table Full Load, Vin=90VAC Full Load, Vin=100VAC Io=Full Load, Vin=100VAC Io=Full Load, Vin=110VAC All Outputs Recovers automatically after fault condition is removed 1 5 110 Automatic Recovery 150 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] % Page 1 of 4 DTSPU41A SERIES 30-40 Watt Single Output AC/DC Desktop Power Supply Rev A SPECIFICATIONS All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS ENVIRONMENTAL SPECIFICATIONS Operating Temperature Derate linearly from 100% load at 40ºC to 50% load at 70ºC Storage Temperature 10~95%RH Operating Humidity Non-Condensing Storage Humidity Air Discharge, IEC61000-4-2 Electro Static Discharge Contact Discharge, IEC61000-4-2 Operating Altitude All Conditions Vibration 10~500Hz, 10min./1cycle, 60 min. each along X, Y, Z axes Line-Neutral Surge Voltage Line-PE & Neutral-PE Flammability Rating Cooling MTBF Operating Temperature at 25°C, Calculated per MIL-HDBK-217F GENERAL SPECIFICATIONS Efficiency Io=Full Load, Vin=230VAC Primary to Secondary Dielectric Withstanding Voltage Primary to PE Isolation Resistance Test Voltage=500VDC Safety Ground Leakage Current Vin=240VAC/60Hz PHYSICAL SPECIFICATIONS Weight Min 0 -40 0 0 Typ Max 70 85 95 95 8 6 3000 5 1 2 UL94V-1 Free Air Convection 100,000 Unit °C °C % % kV M G KV Hours 83 90 4242 2550 50 0.75 % VDC VDC MΩ mA Approx. 9.35~9.88oz (265~280g) 4.21in x 1.85in x 1.18in (107±1.0mm x 47.0±1.0mm x 30.1±1.0mm) Dimensions (L x W x H) SAFETY & EMC CHARACTERISTICS Safety Approvals(8) EMC Emission Protection Classes UL/cUL (UL 60950-1:2nd Edition) TUV/GS (EN 60950-1:2nd Edition) Compliance to EN55022 (CISPR22) Class I NOTES (1) (2) (3) (4) (5) (6) (7) (8) (9) 12/3/2015 Ripple and Noise is measured by using 20MHz bandwidth limited oscilloscope and terminated each output with a 0.47µF capacitor at rated load and nominal line. Efficiency is measured at rated load and nominal line. Output can provide up to peak load when the power supply starts up. Staying in more than rated load continually is not allowed. Each output is checked to be within voltage accuracy at 60% rated load condition. Line regulation is defined by changing ±10% of input voltage from nominal line at rated load. Load regulation is defined by changing ±40% of measured output load from 60% rated load. Hold up time is measured from the end of the last charging pulse to the time which the main output drops down to low limit of main output at rated load and nominal line. The DTSPUA-102 is available on NRCan mark. DTSPU41-102~104 are required to use AWG#16/4FT output cable. DTSPU41-105~107 are required to use AWG#18/4FT output cable. DTSPU41-108~111 are required to use AWG#18/6FT output cable. Regulation and efficiency will be changed by modified output cable. Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 2 of 4 Rev A DTSPU41A SERIES 30-40 Watt Single Output AC/DC Desktop Power Supply DERATING CURVES Input Voltage Derating Curve Temperature Derating Curve MECHANICAL DRAWINGS Packing: Net weight: Approx. 265~280g Optional output connectors available. Please call factory for details. 12/3/2015 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 3 of 4 Rev A DTSPU41A SERIES 30-40 Watt Single Output AC/DC Desktop Power Supply COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 12/3/2015 (603)778-2300 (888)597-9255 (603)778-9797 [email protected] www.wallindustries.com 37 Industrial Drive Exeter, NH 03833 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 4 of 4