I. General & Electrical Requirements: 1. Center Frequency (FON): 21.4MHz 2. 3dB Passband: FON 3.75kHz 3. Insertion Loss (@ peak of transmission within the 3dB passband): ≤ 5.0dB 4. Passband Ripple (peak-valley): ≤ 2.0dB 5. Rejection (Minimum, Relative to Insertion Loss) 70dB: FON 7.5kHz maximum 90dB: FON 11.0kHz maximum 6. Input Signal Level: ≤ 0dBm 7. Terminating Impedance: 910W // 2.0pF nominal II. Environmental & Physical Requirements: 1. Temperature Range Operating: -20C to +70C Storage: -55C to +85C 2. Solderability: Per EIAJ-STD-002 3. Shock (survival): Per RTCA DO-160F Section 7, Category B 4. Vibration: Peer RTCA DO-160F Section 8, Category S, Test Curve M and B2 5. Humidity: per RTCA DO-160F Section 6, Category B 6. Thermal Shock: -40˚C for 30-minutes then +85C for 30-minutes for 5-days 7. Package: See Drawing The information contained herein is proprietary to MtronPTI and is submitted in confidence. This information may not be copied or divulged without the express written permission of MtronPTI MtronPTI 2525 Shader Road Orlando, FL 32804 407-298-2000 XF9332 21.4MHz 12-Pole Monolithic Crystal Filter Revision A 12-21-11