Specification for an Diplexer Cavity Filter Assembly MtronPTI P/N SA0066 I. General & Electrical Requirements: 1. Channel 1 Filter Passband: 1375MHz to 1400MHz Insertion Loss (IL, within the passband): @ 25˚C: < 1.5dB (< 1.0dB target) Over OTR: < 1.75dB Passband Ripple: ≤ 0.4dB Passband Return Loss: 15dB minimum 2. Channel 2 Filter Passband: 1427MHz to 1452MHz Insertion Loss (IL, within the passband): @ 25˚C: < 1.5dB (< 1.0dB target) Over OTR: < 1.75dB Passband Ripple: ≤ 0.4dB Passband Return Loss: 15dB minimum 3. Common Isolation Between the Bands: 75dB minimum Power Handling: > 3-watts average, 10-watts peak ZIN/ZOUT (all ports): 50 nominal II. Environmental & Physical Requirements: 1. Environmental Temperature Operating (OTR): -10°C to +70°C Storage (STR): -40°C to +85°C 2. Package: 3. Size: 6.000” (L) x 3.000” (W) x 0.750” (H), excluding connectors Connectors: SMA-Female Page 1 of 2 The information contained herein is proprietary to MtronPTI and is submitted in confidence. This information may not be copied or divulged without the express written permission of MtronPTI Specification for an Diplexer Cavity Filter Assembly MtronPTI P/N SA0066 IV. Design Simulation Plots: V. Data Sheet Revision Table: Date 10/12/11 09/29/11 Rev. 1 0 Author BRM BRM Details of Revision Added Customer P/N for cross reference. Original release. Page 2 of 2 The information contained herein is proprietary to MtronPTI and is submitted in confidence. This information may not be copied or divulged without the express written permission of MtronPTI