Specification for a GPS L2 Band Reject LC Filter MtronPTI P/N: LF9455 I. General & Electrical Requirements 1. Passband 1: 500MHz to 1065MHz 2. Passband 2: 1390MHz to 2600MHz 3. Passband Insertion Loss (500MHz to 1065MHz and 1390MHz to 2600MHz): 0.3dB maximum 4. Return Loss (In Band, 500MHz to 1065MHz and 1390MHz to 2600MHz): 12dB minimum 5. Rejection (1215MHz to 1240MHz): 10dB minimum 6. In-Band Input RF Power: ≤ +52dBm, from 500MHz to 2600MHz @ a +70C baseplate temperature 7. ZIN/ZOUT: 50Ω nominal II. Environmental & Physical Requirements: 1. Temperature Range Operating: -20C to +75C Storage: -50C to +90C 2. Weight: ≤ 3-ounces (estimated) 3. Altitude: 10,000-ft @ CW operation 4. Package: Connectorized Size: 3.040” (L) x 1.460” (W) x 0.655” (H), excluding connectors Input/Output Connector Type: SMA-Female Page 1 of 2 The information contained herein is proprietary to MtronPTI and is submitted in confidence. This information may not be copied or divulged without the express written permission of MtronPTI Specification for a GPS L2 Band Reject LC Filter MtronPTI P/N: LF9455 III. Design Simulation Plots: IV. Data Sheet Revision Table: Date 01/16/14 12/04/13 Rev. A - Author BRM BRM Details of Revision Respecified as a LC Filter implementation. Initial Release. Page 2 of 2 The information contained herein is proprietary to MtronPTI and is submitted in confidence. This information may not be copied or divulged without the express written permission of MtronPTI