IRFP340 Data Sheet July 1999 11A, 400V, 0.550 Ohm, N-Channel Power MOSFET • 11A, 400V Ordering Information IRFP340 TO-247 • rDS(ON) = 0.550Ω • Single Pulse Avalanche Energy Rated • SOA is Power Dissipation Limited • Nanosecond Switching Speeds • Linear Transfer Characteristics • High Input Impedance • Related Literature - TB334 “Guidelines for Soldering Surface Mount Components to PC Boards” Formerly developmental type TA17424. PACKAGE 2088.3 Features This advanced power MOSFET is designed, tested, and guaranteed to withstand a specified level of energy in the breakdown avalanche mode of operation. These are N-Channel enhancement mode silicon gate power field effect transistors designed for applications such as switching regulators, switching converters, motor drivers, relay drivers, and drivers for high power bipolar switching transistors requiring high speed and low gate drive power. They can be operated directly from integrated circuits. PART NUMBER File Number BRAND Symbol D IRFP340 NOTE: When ordering, include the entire part number. G S Packaging JEDEC STYLE TO-247 SOURCE DRAIN GATE DRAIN (FLANGE) 4-329 CAUTION: These devices are sensitive to electrostatic discharge; follow proper ESD Handling Procedures. http://www.intersil.com or 407-727-9207 | Copyright © Intersil Corporation 1999 IRFP340 Absolute Maximum Ratings TC = 25oC, Unless Otherwise Specified Drain to Source Voltage (Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .VDS Drain to Gate Voltage (RGS = 20kΩ) (Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VDGR Continuous Drain Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ID TC = 100oC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ID Pulsed Drain Current (Note 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IDM Gate to Source Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .VGS Maximum Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PD Linear Derating Factor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Single Pulse Avalanche Energy Rating (Note 4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .EAS Operating and Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TJ, TSTG Maximum Temperature for Soldering Leads at 0.063in (1.6mm) from Case for 10s. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TL Package Body for 10s, See Techbrief 334 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tpkg IRFP340 400 400 11 6.8 44 ±20 150 1.2 480 -55 to 150 UNITS V V A A A V W W/oC mJ oC 300 260 oC oC CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. NOTE: 1. TJ = 25oC to 125oC. Electrical Specifications TC = 25oC, Unless Otherwise Specified MIN TYP MAX UNITS Drain to Source Breakdown Voltage PARAMETER SYMBOL BVDSS VGS = 0V, ID = 250µA (Figure 10) 400 - - V Gate Threshold Voltage VGS(TH) VGS = VDS, ID = 250µA 2.0 - 4.0 V - - 25 µA - - 250 µA 11 - - A Zero-Gate Voltage Drain Current IDSS TEST CONDITIONS VDS = Rated BVDSS, VGS = 0V VDS = 0.8 x Rated BVDSS, VGS = 0V, TJ = 125oC On-State Drain Current (Note 2) Gate to Source Leakage ID(ON) IGSS Drain to Source On Resistance (Note 2) Forward Transconductance (Note 2) Turn-On Delay Time rDS(ON) gfs td(ON) Rise Time tr Turn-Off Delay Time VDS > ID(ON) x rDS(ON)MAX, VGS = 10V VGS = ±20V - - ±100 nA VGS = 10V, ID = 5.5A (Figures 8, 9) - 0.47 0.55 Ω 6.1 9.1 - S - 14 21 ns - 27 41 ns - 50 75 ns VDS ≥ 50V, ID = 5.5A (Figure 12) VDD = 200V, ID ≈ 11A, RGS = 9.1Ω, RL = 17.4Ω MOSFET Switching Times are Essentially Independent of Operating Temperature td(OFF) Fall Time tf Total Gate Charge (Gate to Source + Gate to Drain) Gate to Source Charge Qg(TOT) Qgs VGS = 10V, ID = 10A, VDS = 0.8 x Rated BVDSS, Ig(REF) = 1.5mA (Figure 14) Gate Charge is Essentially Independent of Operating Temperature - 24 36 ns - 41 63 nC - 6.0 - nC - 23 - nC - 1250 - pF Gate to Drain “Miller” Charge Qgd Input Capacitance CISS Output Capacitance COSS - 300 - pF Reverse-Transfer Capacitance CRSS - 80 - pF - 5.0 - nH - 12.5 - nH - - 0.83 oC/W - - 30 oC/W VGS = 0V, VDS = 25V, f = 1.0MHz (Figure 11) Internal Drain Inductance LD Measured from the Drain Lead, 6mm (0.25in) from the Package to the Center of the Die Internal Source Inductance LS Measured from the Source Lead, 6mm (0.25in) from Header to the Source Bonding Pad Modified MOSFET Symbol Showing the Internal Devices Inductances D LD G LS S Junction to Case RθJC Junction to Ambient RθJA 4-330 Free Air Operation IRFP340 Source to Drain Diode Specifications PARAMETER SYMBOL Continuous Source to Drain Current ISD Pulse Source to Drain Current (Note 3) ISDM TEST CONDITIONS Modified MOSFET Symbol Showing the Integral Reverse P-N Junction Diode D MIN TYP MAX UNITS - - 11 A - - 44 A - - 2.0 V 170 370 790 ns 1.6 3.8 8.2 µC G S Source to Drain Diode Voltage (Note 2) VSD Reverse Recovery Time trr Reverse Recovered Charge QRR TJ = 25oC, ISD = 11A, VGS = 0V (Figure 13) TJ = 25oC, ISD = 10A, dISD/dt = 100A/µs TJ = 25oC, ISD = 10A, dISD/dt = 100A/µs NOTES: 2. Pulse test: pulse width ≤ 300µs, duty cycle ≤ 2%. 3. Repetitive rating: pulse width limited by Max junction temperature. See Transient Thermal Impedance curve (Figure 3). 4. VDD = 50V, starting TJ = 25oC, L = 7.0mH, RG = 50Ω, peak IAS = 11A. Typical Performance Curves Unless Otherwise Specified 15 ID , DRAIN CURRENT (A) 1.0 0.8 0.6 0.4 0.2 0 12 9 6 3 0 0 50 100 150 25 50 TC , CASE TEMPERATURE (oC) 75 100 150 125 TC , CASE TEMPERATURE (oC) FIGURE 1. NORMALIZED POWER DISSIPATION vs CASE TEMPERATURE FIGURE 2. MAXIMUM CONTINUOUS DRAIN CURRENT vs CASE TEMPERATURE 1 ZθJC, NORMALIZED THERMAL IMPEDANCE POWER DISSIPATION MULTIPLIER 1.2 0.5 0.2 0.1 0.1 0.05 10-2 PDM 0.02 0.01 t1 t2t2 SINGLE PULSE NOTES: DUTY FACTOR: D = t1/t2 TJ = PDM x ZθJC x RθJC + TC 10-3 10-5 10-4 0.1 10-3 10-2 t1, RECTANGULAR PULSE DURATION (s) FIGURE 3. NORMALIZED MAXIMUM TRANSIENT THERMAL IMPEDANCE 4-331 1 10 IRFP340 Typical Performance Curves Unless Otherwise Specified (Continued) 15 102 VGS = 10V 10µs 10 100µs 1ms 1 10ms TC = 25oC TJ = MAX RATED 12 VGS = 5.5V 9 VGS = 5.0V 6 VGS = 4.5V 3 DC VGS = 4.0V SINGLE PULSE 0.1 102 10 VDS , DRAIN TO SOURCE VOLTAGE (V) 1 0 103 0 40 80 120 160 VDS , DRAIN TO SOURCE VOLTAGE (V) ID, DRAIN CURRENT (A) 15 PULSE DURATION = 80µs DUTY CYCLE = 0.5% MAX VGS = 10V VGS = 6.0V 12 VGS = 5.5V 9 VGS = 5.0V 6 VGS = 4.5V 3 VGS = 4V 0 2 4 6 8 VDS , DRAIN TO SOURCE VOLTAGE (V) 10 100 PULSE DURATION = 80µs DUTY CYCLE = 0.5% MAX VDS ≥ 50V 10 1 0.1 0 3.0 NORMALIZED DRAIN TO SOURCE ON RESISTANCE 4 ON RESISTANCE RDS(ON), DRAIN TO SOURCE PULSE DURATION = 80µs DUTY CYCLE = 0.5% MAX 3 VGS = 10V 2 VGS = 20V 1 0 20 30 ID , DRAIN CURRENT (A) 40 FIGURE 8. DRAIN TO SOURCE ON RESISTANCE vs GATE VOLTAGE AND DRAIN CURRENT 4-332 2 4 6 8 VGS , GATE TO SOURCE VOLTAGE (V) 10 FIGURE 7. TRANSFER CHARACTERISTICS 5 10 TJ = 25oC TJ = 150oC FIGURE 6. SATURATION CHARACTERISTICS 0 200 FIGURE 5. OUTPUT CHARACTERISTICS IDS(ON), DRAIN TO SOURCE CURRENT (A) FIGURE 4. FORWARD BIAS SAFE OPERATING AREA 0 PULSE DURATION = 80µs DUTY CYCLE = 0.5% MAX VGS = 6.0V OPERATION IN THIS REGION IS LIMITED BY rDS(ON) ID, DRAIN CURRENT (A) ID, DRAIN CURRENT (A) 103 50 2.4 PULSE DURATION = 80µs DUTY CYCLE = 0.5% MAX ID = 5.5A, VGS = 10V 1.8 1.2 0.6 0 -60 -40 -20 0 20 40 60 80 100 120 140 160 TJ , JUNCTION TEMPERATURE (oC) FIGURE 9. NORMALIZED DRAIN TO SOURCE ON RESISTANCE vs JUNCTION TEMPERATURE IRFP340 Typical Performance Curves 2500 ID = 250µA 1.15 1.05 0.95 0.85 0.75 -60 1500 COSS -40 -20 0 20 40 60 80 0 100 120 140 160 103 FIGURE 11. CAPACITANCE vs DRAIN TO SOURCE VOLTAGE 100 PULSE DURATION = 80µs DUTY CYCLE = 0.5% MAX ISD , SOURCE TO DRAIN CURRENT (A) PULSE DURATION = 80µs DUTY CYCLE = 0.5% MAX VDS ≥ 50V 9 TJ = 150oC 6 3 10 TJ = 150oC TJ = 25oC 1 0.1 0 4 8 12 ID , DRAIN CURRENT (A) 16 20 0 FIGURE 12. TRANSCONDUCTANCE vs DRAIN CURRENT 0.3 0.6 0.9 1.2 VSD , SOURCE TO DRAIN VOLTAGE (V) FIGURE 13. SOURCE TO DRAIN DIODE VOLTAGE 20 VGS , GATE TO SOURCE VOLTAGE (V) gfs , TRANSCONDUCTANCE (S) 10 102 VDS , DRAIN TO SOURCE VOLTAGE (V) 1 TJ = 25oC 0 CRSS 500 FIGURE 10. NORMALIZED DRAIN TO SOURCE BREAKDOWN VOLTAGE vs JUNCTION TEMPERATURE 12 CISS 1000 TJ , JUNCTION TEMPERATURE (oC) 15 VGS = 0V, f = 1MHz CISS = CGS + CGD CRSS = CGD COSS ≈ CDS + CGS 2000 C, CAPACITANCE (pF) NORMALIZED DRAIN TO SOURCE BREAKDOWN VOLTAGE 1.25 Unless Otherwise Specified (Continued) ID = 10A 16 VDS = 80V 12 VDS = 200V VDS = 320V 8 4 0 0 12 24 36 48 60 Qg, GATE CHARGE (nC) FIGURE 14. GATE TO SOURCE VOLTAGE vs GATE CHARGE 4-333 1.5 IRFP340 Test Circuits and Waveforms VDS BVDSS L tP VARY tP TO OBTAIN + RG REQUIRED PEAK IAS - VGS VDS IAS VDD VDD DUT tP 0V IAS 0 0.01Ω tAV FIGURE 15. UNCLAMPED ENERGY TEST CIRCUIT FIGURE 16. UNCLAMPED ENERGY WAVEFORMS tON tOFF td(ON) td(OFF) tf tr RL VDS 90% 90% + RG - VDD 10% 10% 0 DUT 90% VGS VGS 0 FIGURE 17. SWITCHING TIME TEST CIRCUIT 0.2µF 50% PULSE WIDTH 10% FIGURE 18. RESISTIVE SWITCHING WAVEFORMS VDS (ISOLATED SUPPLY) CURRENT REGULATOR 12V BATTERY 50% VDD Qg(TOT) SAME TYPE AS DUT 50kΩ Qgd 0.3µF VGS Qgs D VDS DUT G Ig(REF) 0 S 0 IG CURRENT SAMPLING RESISTOR VDS ID CURRENT SAMPLING RESISTOR FIGURE 19. GATE CHARGE TEST CIRCUIT 4-334 Ig(REF) 0 FIGURE 20. GATE CHARGE WAVEFORMS IRFP340 All Intersil semiconductor products are manufactured, assembled and tested under ISO9000 quality systems certification. Intersil semiconductor products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see web site http://www.intersil.com Sales Office Headquarters NORTH AMERICA Intersil Corporation P. O. Box 883, Mail Stop 53-204 Melbourne, FL 32902 TEL: (407) 724-7000 FAX: (407) 724-7240 4-335 EUROPE Intersil SA Mercure Center 100, Rue de la Fusee 1130 Brussels, Belgium TEL: (32) 2.724.2111 FAX: (32) 2.724.22.05 ASIA Intersil (Taiwan) Ltd. 7F-6, No. 101 Fu Hsing North Road Taipei, Taiwan Republic of China TEL: (886) 2 2716 9310 FAX: (886) 2 2715 3029