G3VM-61HR1 MOS FET Relays Higher power, 3.3-A switching with a 60-V load voltage, SOP package. Low 30-mΩ ON Resistance. • Continuous load current of 3.3 A. (Connection C: 6.6 A) Note: The actual product is marked differently from the image shown here. RoHS compliant ■ Application Examples ■ Terminal Arrangement/Internal Connections 6 5 4 • Communication equipment • Test & Measurement equipment OMRON logo • Data loggers • Industrial equipment 2 1 Model name 61HR1 932 Pin 1 mark LOT.No. 3 Note: The actual product is marked differently from the image shown here. ■ List of Models Package type Contact form Load voltage (peak value) * Terminals 1a Surface-mounting Terminals (SPST-NO) * The AC peak and DC value are given for the load voltage. 60 V SOP6 Model G3VM-61HR1 G3VM-61HR1 (TR05) Minimum package quantity Number per tube Number per tape and reel 75 500 ■ Absolute Maximum Ratings (Ta = 25°C) Output Input Item LED forward current LED forward current reduction rate LED reverse voltage Connection temperature Load voltage (AC peak/DC) Connection A Continuous Connection B load current Connection C Connection A ON current reduction Connection B rate Connection C Pulse ON current Connection temperature Dielectric strength between I/O (See note 1.) Ambient operating temperature Ambient storage temperature Soldering temperature Symbol IF ∆IF/°C VR TJ VOFF Rating 30 −0.3 5 125 60 3.3 3.3 6.6 −33 −33 −66 10 125 Unit mA mA/°C V °C V VI-O 1500 Vrms Ta Tstg −40 to +85 −55 to +125 °C °C IO ∆IO/°C Iop TJ - 260 A mA/°C A °C °C Measurement conditions Ta ≥ 25°C Note: 1. The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side and all pins as a group on the light-receiving side. Connection Diagram Connection A: AC peak/DC Connection B and C: DC Connection A Ta ≥ 25°C t = 100 ms, Duty = 1/10 Connection B 1 6 Load 2 5 3 4 or AC DC 1 6 2 5 3 4 1 6 2 5 3 4 Input Output 1 DC AC for 1 min With no icing or condensation With no icing or condensation 10 s Connection C ■ Electrical Characteristics (Ta = 25°C) Item Symbol Minimum Typical Maximum LED forward voltage VF 1.18 1.33 1.48 Reverse current IR 10 Capacity between terminals CT 70 Trigger LED forward current IFT 0.2 3 Turn-OFF LED forward current IFC 0.1 Connection A 30 60 Maximum resistance Connection B RON 15 with output ON Connection C 8 Current leakage when the relay is open ILEAK 20 Capacity between terminals Coff 700 1500 Capacity between I/O terminals CI-O 0.8 Insulation resistance between I/O terminals RI-O 1000 108 Turn-ON time tON 0.6 5 Turn-OFF time tOFF 0.2 1 Load Unit V µA pF mA mA mΩ nA pF pF MΩ ms ms Measurement conditions IF = 10 mA VR = 5 V V = 0, f = 1 MHz Note: 2. Turn-ON and Turn-OFF Times IO = 2 A IF 1 6 RL IOFF = 10 µA VDD VOUT IF = 5 mA, IO = 2 A, t < 1 s 2 4 IF = 5 mA, IO = 2 A, t < 1 s IF = 5 mA, IO = 4 A, t < 1 s VOFF = 60 V V = 0, f = 1 MHz IF f = 1 MHz, VS = 0 V VI-O = 500 VDC, ROH ≤ 60 % 90% VOUT 10% IF = 5 mA, RL = 200 Ω, t ON t OFF VDD = 20 V (See note 2.) Load DC G3VM-61HR1 MOS FET Relays ■ Recommended Operating Conditions For usage with high reliability, Recommended Operation Conditions is a measure that takes into account the derating of Absolute Maximum Ratings and Electrical Characteristics. Each item on this list is an independent condition, so it is not simultaneously satisfy several conditions. Item Symbol Minimum Typical Maximum Load voltage (AC peak/DC) VDD - - 48 Unit V Operating LED forward current IF 5 10 25 mA Continuous load current (AC peak/DC) IO - - 3.3 A Ambient operating temperature Ta −20 - 65 °C ■ Engineering Data Continuous load current vs. Ambient temperature IO - Ta (Maximum value) Continuous load current IO (A) LED forward current IF (mA) IF - Ta 50 40 30 20 LED forward current vs. LED forward voltage (Maximum value) 8 7 6 Connection C 5 4 3 LED forward current IF (mA) LED forward current vs. Ambient temperature IF - VF (Average value) 100 Ta = 25°C 10 1 Connection A and B 2 0.1 10 1 -20 0 20 40 60 80 0 -40 100 -20 0 20 Ambient temperature Ta (°C) Continuous load current vs. On-state voltage 80 2 1 0 -1 90 80 IO = 2 A IF = 5 mA, t < 1 s Connection A 70 60 50 40 30 20 -3 1 1.5 2 LED forward voltage VF (V) IFT - Ta (Average value) 3 IO = 2 A, t < 1 s 2 1 10 -100 -50 0 50 100 0 -40 150 -20 0 On-state voltage VON (mV) Turn ON, Turn OFF time vs. LED forward current tOFF Ta = 25°C VDD = 20 V RL = 200 Ω 1 tON, tOFF - Ta (Average value) tON 0.1 10 60 80 100 0 -40 100 Turn ON, Turn OFF time vs. Ambient temperature 10 1 40 -20 0 Ambient temperature Ta (°C) Turn ON, Turn OFF time tON, tOFF (ms) tON, tOFF - IF 20 40 60 80 100 Current leakage vs. Ambient temperature ILEAK - Ta (Average value) 10 tON 1 0.1 20 Ambient temperature Ta (°C) Current leakage ILEAK (nA) -4 -150 Turn ON, Turn OFF time tON, tOFF (ms) 0.5 (Average value) 100 -2 0.01 0 Trigger LED forward current vs. Ambient temperature RON - Ta (Average value) Ta = 25°C IF = 5 mA, t < 1 s Connection A 0.01 100 On-state resistance vs. Ambient temperature 4 3 60 Ambient temperature Ta (°C) On-state resistance RON (mΩ) Continuous load current IO (A) IO - VON 40 Trigger LED forward current IFT (mA) 0 -40 tOFF (Average value) 1000 VOFF = 60 V 100 10 1 VDD = 20 V RL = 200 Ω IF = 5 mA 0.01 -40 -20 0 LED forward current IF (mA) 20 40 60 80 100 Ambient temperature Ta (°C) 0.1 -20 0 20 40 60 80 100 Ambient temperature Ta (°C) ■ Safety Precautions • Refer to "Common Precautions" for all G3VM models. 2 Appearance/Dimensions SOP6 type ■ Appearance SOP (Small Outline Package) SOP6 OMRON logo 61HR1 932 Pin 1 mark Model name LOT.No. Note: The actual product is marked differently from the image shown here. ■ Dimensions (Unit: mm) Surface-mounting Terminals Actual Mounting Pad Dimensions Weight: 0.13 g 4.4±0.25 6.3±0.25 (Recommended Value, TOP VIEW) 2.1 max. 6 to 6.3 1.2 0.15 0.8 2.54±0.25 Note: The actual product is marked differently from the image shown here. 0.1±0.1 0.4±0.1 0.6±0.3 7.0±0.4 2.54 2.54 • Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product. • Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or equipment, and be sure to provide the system or equipment with double safety mechanisms. Note: Do not use this document to operate the Unit. OMRON Corporation Electronic and Mechanical Components Company Contact: www.omron.com/ecb Cat. No. K280-E1-01 1015(1015)(O)