UNISONIC TECHNOLOGIES CO., LTD UT8067 Preliminary Power MOSFET 9A, 30V, N-CHANNEL MOSFET DESCRIPTION The UTC UT8067 is an N-channel MOSFET, it uses UTC’s advanced technology to provide the customers with high switching speed and a minimum on-state resistance, etc. The UTC UT8067 is suitable for high-efficiency DC-DC converters, mobile handsets and notebook PCs. FEATURES * RDS(ON) < 33 mΩ @ VGS=4.5V, ID=4.5A * High switching speed ORDERING INFORMATION Ordering Number Note: UT8067G-S08-R Pin Assignment: S: Source Package G: Gate SOP-8 D: Drain 1 S 2 S Pin Assignment 3 4 5 6 7 S G D D D 8 D Packing Tape Reel MARKING www.unisonic.com.tw Copyright © 2015 Unisonic Technologies Co., Ltd 1 of 5 QW-R210-005.b UT8067 Preliminary Power MOSFET ABSOLUTE MAXIMUM RATINGS (TA=25°C, unless otherwise specified) PARAMETER SYMBOL RATINGS UNIT Drain-Source Voltage VDSS 30 V Gate-Source Voltage VGSS ±20 V Continuous (Note 1) ID 9 A Drain Current Pulsed (Note 1) IDM 36 A Avalanche Current IAR 9 A Single Pulsed Avalanche Energy (Note 2) EAS 21 mJ Power Dissipation (t=10s) PD 1.0 W Junction Temperature TJ 150 °C Storage Temperature Range TSTG -55~+150 °C Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. 2. Repetitive Rating: Pulse width limited by maximum junction temperature 3. L = 0.2mH, IAS = 9A, VDD = 24V, RG = 1.2Ω, Starting TJ = 25°C THERMAL CHARACTERISTICS PARAMETER SYMBOL Junction to Ambient (t=10s) θJA Note: Surface Mounted on 25.4 mm×25.4 mm×0.8mm FR4 Board. RATINGS 125 UNIT °C/W ELECTRICAL CHARACTERISTICS (TA=25°C, unless otherwise specified) PARAMETER OFF CHARACTERISTICS SYMBOL Drain-Source Breakdown Voltage Drain-Source Leakage Current Gate-Source Leakage Current Forward Reverse ON CHARACTERISTICS Gate Threshold Voltage Static Drain-Source On-State Resistance DYNAMIC PARAMETERS Input Capacitance Output Capacitance Reverse Transfer Capacitance SWITCHING PARAMETERS Total Gate Charge BVDSS BVDSX IDSS IGSS VGS(TH) RDS(ON) CISS COSS CRSS QG TEST CONDITIONS ID=10mA, VGS=0V ID=10mA, VGS=-20V VDS=30V, VGS=0V VGS=+20V, VDS=0V VGS=-20V, VDS=0V 30 15 VDS=10V, ID=0.1mA VGS=4.5V, ID=4.5A VGS=10V, ID=4.5A 1.3 VGS=0V, VDS=10V, f=1.0MHz VDD≈24V, VGS=10V, ID=9A VDD≈24V, VGS=5V, ID=9A Gate to Source Charge QGS VDD≈24V, VGS=10V, ID=9A Gate to Drain Charge QGD Gate Resistance RG VGS=0V, VDS=10V, f=5MHz Turn-ON Delay Time tD(ON) Rise Time tR Turn-OFF Delay Time tD(OFF) Fall-Time tF SOURCE- DRAIN DIODE RATINGS AND CHARACTERISTICS Drain-Source Diode Forward Voltage VSD ISD=9A, VGS=0V Continuous Drain-Source Current ISD Notes: 1. Pulse Test: Pulse width ≤ 300µs, Duty cycle ≤ 2% 2. Essentially independent of operating temperature UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN TYP MAX UNIT 10 +0.1 -0.1 26 20 2.3 33 25 V V µA µA µA V mΩ 690 120 28 pF pF pF 9.5 4.7 2.2 0.9 3.4 6.7 2.1 15 2.1 5.1 nC nC nC nC Ω ns ns ns ns -1.2 36 V A 2 of 5 QW-R210-005.b UT8067 Preliminary Power MOSFET TEST CIRCUITS AND WAVEFORMS D.U.T. + VDS - + - L RG Driver VGS VDD * dv/dt controlled by RG * ISD controlled by pulse period * D.U.T.-Device Under Test Same Type as D.U.T. Peak Diode Recovery dv/dt Test Circuit VGS (Driver) Period D= P.W. P. W. Period VGS= 10V IFM, Body Diode Forward Current ISD (D.U.T.) di/dt IRM Body Diode Reverse Current Body Diode Recovery dv/dt VDS (D.U.T.) VDD Body Diode Forward Voltage Drop Peak Diode Recovery dv/dt Waveforms UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 5 QW-R210-005.b UT8067 Preliminary Power MOSFET TEST CIRCUITS AND WAVEFORMS (Cont.) itching Test Circuit Switching Waveforms VGS QG 10V QGS QGD Charge Gate Charge Test Circuit Gate Charge Waveform BVDSS IAS ID(t) VDS(t) VDD tp Unclamped Inductive Switching Test Circuit UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw Time Unclamped Inductive Switching Waveforms 4 of 5 QW-R210-005.b UT8067 Preliminary Power MOSFET UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 5 QW-R210-005.b