3W DC-DC Converter P3Z-Series ● ● ● ● ● ● ● ● 3 W Regulated output power 2:1 Wide input voltage range International safety standard approval Five-Sided shield High efficiency up to 80% Standard 24 pin DIP package Over current protection Output 1 to output 2 isolation Model selection guide Typ Input nominal voltage [VDC] Dual separate output P3Z12DS05 9...18 P3Z12DS12 9...18 P3Z12DS15 9...18 P3Z24DS05 18...36 P3Z24DS12 18...36 P3Z24DS15 18...36 P3Z48DS05 36...75 P3Z48DS12 36...75 P3Z48DS15 36...75 current full load [mA] 293 329 329 147 169 169 75 86 86 Output 1 voltage current capacitor load max. [VDC] [mA] [µF] 5 12 15 5 12 15 5 12 15 250 125 100 250 125 100 250 125 100 Output 2 voltage current capacitor load max. [VDC] [A] [µF] 470 100 68 470 100 68 470 100 68 5 12 15 5 12 15 5 12 15 250 125 100 250 125 100 250 125 100 470 100 68 470 100 68 470 100 68 Page 1 of 2 Deutschland: Inselkammerstraße 10 D-82008 Unterhaching Tel.: 089 614 503-10 E-Mail: [email protected] Schweiz: Gründenstrasse 82 CH-8247 Flurlingen Tel.: 052 647 42 00 E-Mail: [email protected] 3W DC-DC Converter P3Z-Series Specifications Input Voltage range Filter (see note 1) Surge voltage 100mS max. General Efficiency Switching frequency Environmental Operating temperature more efficient version suffix “M1” Storage temperature range Maximum case temp. Thermal impedance Relative humidity Vibration Physical Dimensions 12V type 9-18 VDC 24V type 18-36 VDC 48V type 36-75 VDC Pi type 12V type 36 VDC 24V type 50 VDC 48V type 100 VDC 350 mS typ. Start up time Output Output Power Voltage accuracy full load and nominal Vin Ripple and noise (at 20 MHz BW) Line voltage regulation LL to HL at full load Load voltage regulation Cross regulation Temperature coefficient Transient response recovery time 25% load step change Short circuit protection Over load protection Minimum load 3 W max. ±2% 50mVpp ±0.2% ±1% @ 25% to 100% load ±5% @ 25%/100% load ± 0.02% / °C, max 200µs Continuous, automatics recovery 180% typ. of full load 10% of full load Weight Case material Base material Potting material Isolation Isolation voltage input to output output to output Resistance Capacitance Reliability MTBF BELLCORE TR-NMT-0003 32 Dimensions See table 300 kHz, typ. -25°C to +85°C ( with derating ) -40°C to +85°C ( non derating ) -55 °C to +105 °C +100 °C 20°C/W 5% to 95% 10-55Hz, 2G, 30min. X,Y and Z axis 1.25 x 0.8 x 0.4 inches 31.8 x 20.8 x 10.2 mm 16 g Nickel-coated copper Non-conductive black plastic Epoxy (UL94-V0) 500 VDC, min. 500 VDC, min. 9 10 Ω, min. 300pF, max 6 3.069x10 hrs @ 50% stress and temperature 40°C Derating All dimensions in inches (mm) Pin pitch tolerance ±0.014 (0.35) Pin connections Pin 1 / 24 2 / 23 3 / 22 10 / 15 11 / 14 12 / 13 Dual + Input - V1 out + V1 out - V2 out + V2 out - Input Life Support Policy: HY-LINE does not authorize the use of any of its products for use in life support devices or systems without the express written approval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. Rev: 10 / 2006 f Page 2 of 2 Deutschland: Inselkammerstraße 10 D-82008 Unterhaching Tel.: 089 614 503-10 Schweiz: Gründenstrasse 82 CH-8247 Flurlingen Tel.: 052 647 42 00 E-Mail: [email protected] E-Mail: [email protected]