Plastic Packages for Integrated Circuits Package Outline Drawing L72.10x10E 72 LEAD QUAD FLAT NO-LEAD PLASTIC PACKAGE Rev 0, 11/09 A X 10.00 9.75 72 Z EXPOSED PAD AREA B 6 PIN #1 INDEX AREA 72 1 1 6 PIN 1 INDEX AREA 8.500 REF. (4X) 9.75 3.000 REF. 6.000 REF. 10.00 0.100 M C A B (4X) 0.15 4.150 REF. TOP VIEW 7.150 REF. 0.100 M C A B BOTTOM VIEW 11° ALL AROUND 9.75 ±0.10 Y C0.400X45° (4X) 10.00 ±0.10 (0.350) 0.450 R0.200 SIDE VIEW 25 .1 (0 (4X 9.70) LL A A O R D N ) 1 C0.190X45° (4.15 REF) U (1.500) (7.15) 0.500 ±0.100 72 R0.115 TYP. (3.00 ) (4X 8.50) (6.00) DETAIL "Z" R0.200 MAX. ALL AROUND TYPICAL RECOMMENDED LAND PATTERN NOTES: 1. Dimensions are in millimeters. Dimensions in ( ) for Reference Only. 2. Dimensioning and tolerancing conform to ANSI Y14.5m-1994. 3. Unless otherwise specified, tolerance : Decimal ± 0.10 Angular ±2.50° 4. Dimension applies to the metallized terminal and is measured between 0.015mm and 0.30mm from the terminal tip. 5. Tiebar shown (if present) is a non-functional feature. 6. The configuration of the pin #1 identifier is optional, but must be located within the zone indicated. The pin #1 indentifier may be 7. Package outline compliant to JESD-M0220. either a mold or mark feature. 1 0.190~0.245 SEATING PLANE 0.080 C 0.50 0.025 ±0.020 0.23 ±0.050 0.85 ±0.050 0.100 C ( 72X 0 .70) 0.650 ±0.050 ( 72X 0 .23) DETAIL "X" 0.100 M C A B 0.050 M C DETAIL "Y" C