VS-UFB80FA40 www.vishay.com Vishay Semiconductors Insulated Ultrafast Rectifier Module, 80 A FEATURES • Two fully independent diodes • Fully insulated package • Ultrafast, soft reverse recovery, with high operation junction temperature (TJ max. = 175 °C) • Low forward voltage drop • Optimized for power conversion: welding and industrial SMPS applications • Easy to use and parallel • Industry standard outline SOT-227 • UL approved file E78996 • Designed and qualified for industrial level • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 DESCRIPTION / APPLICATIONS The VS-UFB80FA40 insulated modules integrate two state of the art ultrafast recovery rectifiers in the compact, industry standard SOT-227 package. The diodes structure, and its life time control, provide an ultrasoft recovery current shape, together with the best overall performance, ruggedness and reliability characteristics. PRODUCT SUMMARY VR 400 V IF(AV) per module at TC = 121 °C 80 A trr 32 ns Type Modules - Diode FRED Pt® Package SOT-227 These devices are thus intended for high frequency applications in which the switching energy is designed not to be predominant portion of the total energy, such as in the output rectification stage of welding machines, SMPS, DC/DC converters. Their extremely optimized stored charge and low recovery current reduce both over dissipation in the switching elements (and snubbers) and EMI/RFI. ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL TEST CONDITIONS MAX. UNITS 400 V Cathode to anode voltage VR Continuous forward current per diode IF TC = 130 °C 40 Single pulse forward current per diode IFSM TC = 25 °C 270 PD TC = 130 °C Maximum power dissipation per module RMS isolation voltage VISOL Operating junction and storage temperatures A 90 Any terminal to case, t = 1 min TJ, TStg W 2500 V -55 to +175 °C ELECTRICAL SPECIFICATIONS PER DIODE (TJ = 25 °C unless otherwise specified) PARAMETER SYMBOL Cathode to anode breakdown voltage VBR Forward voltage VFM Reverse leakage current IRM Junction capacitance CT TEST CONDITIONS MIN. TYP. MAX. 400 - - IF = 30 A - 1.14 1.39 IF = 30 A, TJ = 175 °C - 0.91 1.04 VR = VR rated - - 50 μA IR = 100 μA UNITS V TJ = 175 °C, VR = VR rated - - 1 mA VR = 200 V - 68 - pF Revision: 31-May-16 Document Number: 93620 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-UFB80FA40 www.vishay.com Vishay Semiconductors DYNAMIC RECOVERY CHARACTERISTICS (TJ = 25 °C unless otherwise specified) PARAMETER SYMBOL Reverse recovery time trr Peak recovery current MIN. TYP. MAX. - 32 - TJ = 25 °C - 68 - TJ = 125 °C - 125 - - 6.8 - - 15 - IF = 30 A TJ = 25 °C IRRM Reverse recovery charge TEST CONDITIONS IF = 1.0 A, dIF/dt = 200 A/μs, VR = 30 V dIF/dt = 200 A/μs TJ = 125 °C VR = 200 V TJ = 25 °C Qrr - 215 - - 900 - MIN. TYP. MAX. - - 1.0 TJ = 125 °C UNITS ns A nC THERMAL - MECHANICAL SPECIFICATIONS PARAMETER SYMBOL Junction to case, single leg conducting Junction to case, both leg conducting Case to heatsink TEST CONDITIONS RthJC RthCS - - 0.50 Flat, greased surface - 0.10 - - 30 - g Torque to terminal - - 1.1 (9.7) Nm (lbf.in) Torque to heatsink - - 1.3 (11.5) Nm (lbf.in) Weight Mounting torque Case style °C/W SOT-227 1000 1000 TJ = 175 °C 100 TJ = 175 °C TJ = 25 °C 10 100 IR - Reverse Current (µA) IF - Instantaneous Forward Current (A) UNITS 1 10 1 0.1 0.01 TJ = 25 °C 0.001 0 0.5 1 1.5 2 0 2.5 100 200 300 400 VF - Forward Voltage Drop (V) VR - Reverse Voltage (V) Fig. 1 - Typical Forward Voltage Drop Characteristics (Per Leg) Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage Junction Capacitance - CT (pF) 1000 100 TJ = 25 °C 10 1 10 100 1000 Reverse Voltage - VR (V) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage Revision: 31-May-16 Document Number: 93620 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-UFB80FA40 www.vishay.com Vishay Semiconductors ZthJC - Thermal Impedance (°C/W) 10 1 PDM t1 DC t2 0.1 Single pulse (thermal resistance) 0.01 0.0001 0.001 Notes: 1. Duty factor D = t1/t2 2. Peak TJ = PDM x ZthJC + TC 0.01 0.1 1 10 t1 - Rectangular Pulse Duration (s) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics (Per Leg) 150 140 150 130 125 110 100 DC 75 Square Wave (D = 0.5) Rated VR applied 50 TJ = 125 °C 100 90 80 70 25 TJ = 25 °C 60 50 100 0 0 20 40 60 80 100 120 1000 IF(AV) - Average Forward Current (A) dIF/dt (ns) Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current (Per Leg) Fig. 7 - Typical Reverse Recovery Time vs. dIF/dt 2400 90 80 2000 70 If = 30 A Vrr = 100 V RMS Limit 60 1600 Qrr (nC) Average Power Loss (W) If = 30 A Vrr = 100 V 120 trr (ns) Allowable Case Temperature (°C) 175 50 40 D = 0.05 D = 0.10 D = 0.20 D = 0.33 D = 0.50 30 20 DC 10 800 400 TJ = 25 °C 0 0 10 20 30 40 50 60 70 TJ = 125 °C 1200 80 0 100 1000 IF(AV) - Average Forward Current (A) dIF/dt (A/μs) Fig. 6 - Forward Power Loss Characteristics (Per Leg) Fig. 8 - Typical Stored Charge vs. dIF/dt Note Formula used: TC = TJ - (Pd + PdREV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = 80 % rated VR (1) Revision: 31-May-16 Document Number: 93620 3 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-UFB80FA40 www.vishay.com Vishay Semiconductors VR = 200 V 0.01 Ω L = 70 μH D.U.T. dIF/dt adjust D IRFP250 G S Fig. 9 - Reverse Recovery Parameter Test Circuit (3) trr IF ta tb 0 Qrr (2) IRRM (4) 0.5 IRRM dI(rec)M/dt (5) 0.75 IRRM (1) dIF/dt (1) dIF/dt - rate of change of current through zero crossing (2) IRRM - peak reverse recovery current (3) trr - reverse recovery time measured from zero crossing point of negative going IF to point where a line passing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current. (4) Qrr - area under curve defined by trr and IRRM Qrr = trr x IRRM 2 (5) dI(rec)M/dt - peak rate of change of current during tb portion of trr Fig. 10 - Reverse Recovery Waveform and Definitions Revision: 31-May-16 Document Number: 93620 4 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-UFB80FA40 www.vishay.com Vishay Semiconductors ORDERING INFORMATION TABLE Device code VS- UF B 80 F A 40 1 2 3 4 5 6 7 1 - Vishay Semiconductors product 2 - Ultrafast rectifier 3 - Ultrafast Pt diffused 4 - Current rating (80 = 80 A) 5 - Circuit configuration (2 separate diodes, parallel pin-out) 6 - Package indicator (SOT-227 standard insulated base) 7 - Voltage rating (40 = 400 V) CIRCUIT CONFIGURATION CIRCUIT CIRCUIT CONFIGURATION CODE CIRCUIT DRAWING Lead Assignment 2 separate diodes, parallel pin-out 4 3 1 2 4 3 1 2 F LINKS TO RELATED DOCUMENTS Dimensions www.vishay.com/doc?95423 Packaging information www.vishay.com/doc?95425 Revision: 31-May-16 Document Number: 93620 5 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000