Product Specification Process and Data Interfaces 8P8C mod jack EXG series – State-of-the-art CMOS Matrix Cameras ▪▪ Simple integration by GigE Vision® compliance ▪▪ Resolution up to 5.0 megapixels in color and monochrome ▪▪ Innovative technology with High Dynamic Range (HDR), Auto-Exposure and AutoGain ▪▪ Minimal dimensions with 36 x 36 x 42 mm Sensor Camera Type Monochrome / Color EXG03 / EXG03c EXG50 Resolution Size 1/3" 1/2.5" Full Frames [max. fps] 752 x 480 / 748 x 476 2592 x 1944 Dimensions 60 14 26 C-Mount 1 M8 3 pins 3 8 1 1 2 3 4 5 6 7 8 (gn/wh) (gn) (og/wh) (bu) (bu/wh) (og) (bn/wh) (bn) MX1+ MX1MX2+ MX3+ MX3MX2MX4+ MX4- 1 3 4 (bn) (bu) (bk) Power VCC GND NC Power Supply 3 M 4x 4 3 4 Power VCC 8 VDC ... 30 VDC Current I 620 mA ... 120 mA Power consumption P approx. 3.5 ... 6 W 1 2 3 4 (bn) (wh) (bu) (bk) TrigIN+ TrigINFlashout Uext Further technical details available in the respective data sheets. LED Signaling 1 36 26 2 1 Quick Start Guide EXG Gigabit Ethernet cameras 36 M8 4 pins 2 42 36 36 LED 1 Tested according to standard EMVA 1288 Safety System Requirements Conformity: CPU Safety Precautions Notice See user´s Guide for the complete safety instructions! ▪▪ Protect the sensor from dirt and moisture. ▪▪ Never open the camera housing. ▪▪ Avoid camera contamination by foreign objects. Clock RAM Operating system (OS) Graphic Ethernet Framework (optional) Environmental requirements: Storage temp. Operating temp. Housing temp. Humidity -10°C ... +70°C +5°C ... +50°C max. +50°C 10 % ... 90 % Non-condensing Further Information For further information on our products visit www.baumeroptronic.com For technical issues, please contact our technical support: [email protected] · Phone +49 (0)3528 4386-0 · Fax +49 (0)3528 4386-86 © Baumer Optronic GmbH · Badstrasse 30 · DE-01454 Radeberg, Germany Technical data has been fully checked, but accuracy of printed matter not guaranteed. Subject to change without notice. Printed in Germany 12/04. V1.1 11037878 Installation of standard cameras: ▪▪ Connect the camera using an appropriate cable (at least Cat5e) to the GigE board on your PC (8P8C mod jack) open wire ▪▪ If required, connect a trigger and / or flash to the 4-pin M8 male connector Installation sample 1 - PCI board; 2 - GigE cable; 3 - Cable for trigger and flash; 4 - Power cable ▪▪ Connect the camera to power supply Mounting Adapters Name Item-No. Tripod mounting adapter 11003060 Front mounting adapter 11002638 Documentation and Software Notice .baumer.co ww m Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructios, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occure in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off an on, the user is encouraged to try to correct the interference by one or more of the following measures: ▪▪ Reorient or relocate the receiving antenna. ▪▪ Increase the separation between the equipment and the receiver. ▪▪ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ▪▪ Consult the dealer or an experienced radio/TV technician for help. w FCC – Class B device Meaning Power on Readout active Link active Receiving Transmitting Receiving and Transmitting green yellow green green flash yellow yellow / red flash Installation Single-camera system Multi-camera system Minimum Recommended Minimum Recommended ® ® Intel Pentium 4 ® or comparable Intel Core™ Duo comparable processor processor 2.5 GHz > 2.5 GHz 2.5 GHz 3 GHz 1024 MB 2048 MB 2048 MB > 2048 MB Microsoft® Windows® XP incl. Service Pack 2 or higher Microsoft® Windows® XP x64 incl. Service Pack 2 or higher Microsoft® Windows Vista™ 32 / 64 bit systems Linux® 32 / 64 bit systems from Kernel 2.6.xx recommended resolution 1280 x 1024, color depth at least 16 bit Gigabit Ethernet compliant NIC (recommended Intel® chipset) Windows® OS: .NET™ Framework 2.0 or higher Linux® OS: Mono 1.2.4 or higher CE, FCC Part 15 Class B, RoHS 2 Signal The product documentation and software as well as accompanying tools and applications notes can be obtained in the download area: http://www.baumer.com/de-en/services/member-area/ A registration is required.