Product Specification Dimensions 48 ▪▪ Flexible assembly ▪▪ Requires little space ▪▪ RGB and YUV interpolation algorithms on board ▪▪ Reliable transmission at 5000 Mbit/sec according to USB 3.0 standard ▪▪ Single cable solution for data and power ▪▪ Baumer driver for reliable image transfer 28,35 MXU series – Innovative functionality / flexible installation 8,3 8,2 48 100 CCD Sensor (monochrome / color) 1/4" 656 x 490 160 MXU12 / MXU12c 1/3" 1288 x 960 42 MXU20 / MXU20c 1/1.8" 1624 x 1228 27 MXUC40.2 / MXUC40c.2 14 28,5 S-Mount adapter (optional) 17 5 2/3" 2044 x 1084 55 1" 2044 x 2044 29 2x M3/ 3 2 46/ 6 33 14 5 14 5 17 5 22 5 System Requirements 4 19 26 33 12 Ø 30 www.baumer.com/vision/login 4x M3 /3 M12 x 0 5 26 2x M3/ 3 2 46/ 6 Latest software version and technical documentation available at: Safety 74,45 C-Mount adapter (optional) CMOS Sensor (monochrome / color) MXUC20 / MXUC20c 43,4 1,2 26 Quick Start Guide MX Board Level Cameras (USB3 Vision™) MXU02 / MXU02c 24 [max. fps] 20 Size 3x ø1,8 28,5 Full Frames Resolution 43,4 13,4 Sensor Camera Type 4x ø2,7 2x M2/ 3 1 57/ 6 UN 1" 32 12 94 9 35 Installation Connecting the flexprint cable Notice CE Baumer MX board level cameras are delivered without housing. The housing design is critical to a camera's electromagnetic interference characteristics. For this reason, no CE certification tests regarding electromagnetic interference have been performed on MX board level cameras. Users who add MX board level cameras into their systems should perform appropriate tests for electromagnetic interference. Safety Precautions Notice See the User's Guide for the complete safety instructions! Single-camera system Multi-camera system Recommended Recommended CPU DUAL-Core, Intel Xeon W3503 W3503 Clock 2.4 GHz 2.4 GHz ® Caution Observe precautions for handling electrostatically sensitive devices! ▪▪ Protect the sensor from dirt and moisture. ▪▪ Do not allow the camera to become contaminated with foreign objects. RAM 4 GB ® ! DUAL-Core, Intel® Xeon® 4 GB Opera ing Microsoft Windows 7 32 / 64 bit systems (required for USB 3.0) system (OS) Microsoft® Windows® 8 32 / 64 bit systems (required for USB 3.0) ® Observe the markings when connecting the flexprint cable. ® Mechanical Mounting Caution Environmental Requirements X° Storage temp. -10°C ... +70°C Operating temp. see Heat Transmission Humidity 10 % ... 90 % Non-condensing Further Information For further information about our products, please visit www baumer.com For technical issues, please contact our technical support: [email protected] Phone +49 (0)3528 4386-0 Fax +49 (0)3528 4386-86 © Baumer Optronic GmbH Badstrasse 30 DE-01454 Radeberg, Germany Technical data has been fully checked, but accuracy of printed matter is not guaranteed. Subject to change without notice. Printed in Germany 12/13. v1.0 11121334 Incorrect bending radius for the flexprint cable. An incorrect bending radius can damage the flexprint cable. Only bend the flexprint cable to a radius of up to 3 mm! A Notice Further technical details are available on the respective data sheets. B Length from A to B = 94 mm General Description Heat Transmission LED signals 1 2 Caution 3 Heat can damage the camera. Heat must be dissipated adequately to ensure that the temperatures do not exceed the values in the table below. As there numerous options for installation, Baumer does not specify a specific method for proper heat dissipation. For applications with enough free space, the use of the Baumer heat sink (No. 11118288) is recommended. LED Caution 4 Device heats up during opera ion. Skin irritation possible. Do not touch the camera and/or heat sink during operation. 5 No. Description No. Description 1 Print sensor 4 Digital IOs 2 Flexprint cable 5 USB 3.0 port 3 System print Signal Meaning green USB 3.0 connection yellow USB 2.0 connection (settings possible, no image) LED T Measurement Point Maximum Temperature T Data Interface / Digital IOs Installation Troubleshooting Installing the camera: 1. Check camera operation using the LED signals. 80°C (176°F) USB 3.0 Micro B 1 23 45 1 2 3 4 5 6 7 8 9 10 VBUS DD+ ID GND 6 7 8 9 10 MicB_SSTXMicB_SSTX+ GND_DRAIN MicB_SSRXMicB_SSRX+ → If LED is yellow: • Camera is connected to USB 2.0 (settings possible, no image). open wire → If LED is green: • Check if camera is being used by another application. • Otherwise reconnect camera / restart software. ▪▪ If required, connect a trigger and / or flash to the digital IOs. Caution The General Purpose IOs (GPIOs) are not potential-free and do not have an overrun cut-off. Incorrect wiring (overvoltage, undervoltage or voltage reversal) can lead to defects within the electronics system. GPIO Power VCC: 3.3 V DC IOUT: max. 8 mA The GPIOs are configured as an input through the default camera settings. They must be connected to GPIO_GND if not used or not configured as an output. Digital IOs 1 1 2 3 4 ▪▪ Connect the camera to the USB connection on your PC using an appropriate cable. Shielding IN1 IO GND OUT 1 8 5 6 7 8 GPIO1 GPIO2 IO Power VCC GPIO_GND Installation example 1 - PCI USB board 2 - USB cable 3 - Cable for trigger and flash 2. Check connection using Windows Device Manager: → If device is not listed: • Check the host controller power supply. • Check USB 3.0 cable and connection. → If device is regularly not listed • Check USB 3.0 driver installation.